Setup Installation :: Drive Clone Attempt Isn't Working
Jun 21, 2014
I'm a heavy OSX user so I don't know a whole lot about this, but my son uses Windows because he likes to play games. I'm trying to upgrade his boot drive from a 1TB HDD to a 512GB SSD.
Last night I used Norton Ghost to try to make this happen, but after it completed, the SSD is not booting. I swapped it back to the regular HDD and it's fine. So, I suspect I did something wrong since I don't know too much about this.
The top photo shows the settings that I chose in Ghost. I can give an explanation to why I picked those if any one needs to know why.
The bottom photo shows the results of the clone. The top drive is the original 1TB source, the bottom one is the SSD. I had expected Ghost to pull the smallest EFI system partition, but it didn't. The SSD does have enough space for the data.
The recovery partitions on the original drive... I do NOT want those on the SSD. I have a flash drive that I will use to make recovery media. I don't want to waste space on the drive for recovery.
The source and destination drives were connected to a second PC and were NOT the boot drives.
View 4 Replies
ADVERTISEMENT
Mar 8, 2014
I recently bought a new laptop and I want to take the SSD from my old laptop and put it in my new one. Normally not a problem but I have a lot on my SSD that I still want to be able to use on the old laptop so I was trying to clone it so I could still use things like Office 2010. I have tried various cloning programmes including Clonezilla but none of them worked. The latest I used was EaseUS and it seems to have cloned the drive and partitions ok. But I put the HDD I used as the destination into my old laptop and it will not boot up. Would this be because of drivers etc associated with the SSD?
My next thought is a clean install of windows 8.1 onto the HDD and then using the recovery image I made recently. But I am a bit worried about that, because if the SSD drivers do cause a problem it wont work and will waste my time.
View 9 Replies
View Related
Jun 30, 2014
Which way is better?
1. Remove Hard Drive and install Windows on SSD. Then add HDD and select boot from SSD. Then delete OS from HDD.
2. Delete files from HDD. Then clone HDD to SSD.
Is there a way to only clone Windows from HDD to SDD? Or do I have to clone everything?
View 2 Replies
View Related
Jul 3, 2013
I recently purchased 3 identical Gateway laptop computers to set-up and ship to relatives overseas. All three are running Windows 8. I want each one of them to have the same programs and applications without spend hours or days setting this all up. Is it possible to burn an ISO image of one hard drive and use it to clone the other two identical laptops? I guess sort of like the old "ghost" process. If so, would I need to wipe the other drives first?
View 9 Replies
View Related
Sep 19, 2013
I have a brand new ASUS G750JX running Win 8. The OS is on a 750 GB HDD and I would like to install a 256 GB SSD and move the OS and a few programs to the SSD. Can I clone the drives than use 750 GB HDD for storage? Or is the a better way of moving all the stuff to my SSD?
View 8 Replies
View Related
Dec 5, 2013
I have over 600 GB on my HDD from games, media, and files. I bought a 250GB SSD to boot my OS off of and put some selected programs on. Even after deselecting all my media files, there is still too much on my HDD for the included Samsung clone client to proceed. I just want to use my new SSD as a boot drive for the OS and for several programs while retaining all my other files on my existing HDD.
View 4 Replies
View Related
Jul 18, 2014
Any good program that will allow me to clone my system which is a PCI-E storage device (OCZ Revodrive 350) to a hard drive for backup purposes and of course boot from that hard drive if required to reverse the process?
View 9 Replies
View Related
Jul 10, 2013
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
View 1 Replies
View Related
Aug 13, 2014
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
View 2 Replies
View Related
Jul 16, 2014
I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.
I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.
View 9 Replies
View Related
Sep 15, 2014
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies
View Related
Oct 18, 2013
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
View 2 Replies
View Related
Feb 5, 2014
I have a lenovo laptop that came with Windows 8 x64.
I used ProduKey to extract the license key of my Windows 8 x64.
I downloaded a Windows 8.1 x64 ISO and tried to do a clean install of Windows 8.1 using a USB. It asked me for a key, so I put in the key that was extracted. It said the key was in valid.
I also went to this website, Upgrade Windows with only a product key - Microsoft Windows Support, and tried to use the key for both Windows 8 and 8.1, but both of them didn't work.
I booted the USB in legacy mode (NOT UEFI mode)
View 9 Replies
View Related
Aug 14, 2014
My PC started off on Win 8 and I upgraded to Win 8.1 .
I want to do a completely fresh installation. I do not mind going back to Win 8 and redownloading Win 8.1 afterwards.
My problem is that when I go to PC Settings > "Remove everything and reinstall Windows", I get the error: "Insert media. Some files are missing. Your Windows installation or recovery media will provide these files."
I have a partition on my computer "HP_RECOVERY (F:)". It states 1.24 GB free of 10.6 GB. When I open it, it contains a folder called "Recovery" and "HP_WSD.dat" -- the .dat file is 1 KB. When I open the folder, it says that it is empty (hidden folders and files are set to be shown). If I look at the folder properties, it states that it contains 1 file, 2 folders. The size is 69 bytes.
I have not touched this recovery partition ever since I got this PC. I have, however, run a partition software before because I split my (C:) into (C: and D:). I do not know if this may have somehow corrupted my recovery partition.
What is the best way for me to quickly and cleanly format my PC without losing my registration key? I do not have a copy of Win 8 or Win 8.1 on a CD or USB.
I opened up cmd as admin and typed in "reagentc /info" and it output this:
Code: C:WINDOWSsystem32>reagentc /info Windows Recovery Environment (Windows RE) and system reset configurationInformation: Windows RE status: Enabled Windows RE location: ?GLOBALROOTdeviceharddisk0partition3RecoveryWindowsRE Boot Configuration Data (BCD) identifier: 8fc8db37-7d80-11e3-91ec-faa553f3f5b4 Recovery image location: Recovery image index: 0 Custom image location: Custom image index: 0REAGENTC.EXE: Operation Successful.
View 2 Replies
View Related
Jun 12, 2014
When I installed my copy of windows 8 using a dvd, It installed a recovery partition during the installation. This partition allowed me to do things such as create a recovery drive, and use startup repair, all without needing to insert an installation disk. For some reason, this recovery partition is no longer working. I can't create a recovery drive without being told to insert installation media, and there are no troubleshooting settings when I launch "advanced startup". I noticed this after I deleted all of the bcd bootloader entries in easybcd, and tried to create a recovery drive. I don't know if deleting those entries could have affected windows but I think it might have something to do with it.
The recovery partition is still there, and the files in it are still there.
View 4 Replies
View Related
Sep 19, 2013
I am trying to set up my windows 7 laptop so that it duel boots between 7 and 8 which sounds great. My existing W7 partition has been shrunk and a new partition has been created ready for the install however when trying to install using the disk, I keep being told that windows cant be installed onto the partition due to the disk being a MBR format (think that what the three letters are) .
Is there a way round this without having to remove the current install and remove all of my content.
View 1 Replies
View Related
Jan 17, 2013
Trying Windows 8 at work and bought new Samsung 700t tablet. Windows 8 works fine with local user (linked to live id) and all our software including Symantec Endpoint 12.1.2. As soon as I join to domain (server 2008) and reboot the live tiles no longer function. Have total reset several times and tried refresh and restore points. My guess is that has to be default behavior of Win 8 GPO compared to 2008 domain GPO. We are very plain on our policies and so far have not found anything on local computer or GPO that can correct issues.
View 2 Replies
View Related
Sep 15, 2014
I have a windows 8 laptop and wanted to re install a whole new windows 8 on it. I'm going to use the generic product key than once installed use the one that i found with magic belly bean key finder. I am just worried that it might say something went wrong than have to buy windows 8 so could i partition the hard drive and than once i know the new windows 8 is good than delete the other?
View 2 Replies
View Related
Jan 20, 2014
Just purchased a new win 8.1 computer. As you know it only has the system, recovery partitions and a very large C drive containing the OS and whatever programs that came with the computer.
After cleaning up any unneeded programs, I would like to create 2 more partitions besides drive C:
Total HDD Capacity is 1TB
Is the free space on drive C: indicted in disk management an accurate reading?
Is 80G enough for OS and programs plus some spare space ?
I base the 80G on my older win7 computer where I allocated 78G and only used 44G after 4 years . I am sure I can get away with only 60G but I prefer some wiggle room .
View 9 Replies
View Related
Nov 3, 2013
About 3 times now this has happened, I'll shutdown my PC using the tile target "C:WindowsSystem32shutdown.exe -s -t 00" and usually there is a delay in between shutting down and it randomly booting itself which makes it really weird that it isn't just an instant restart instead of shutdown. It's not a very long delay really, maybe 1-2 minutes.
The last two times I remember it was around 3:00 AM which is when it was set in Action Center Maintenance Settings to wake up the computer and run the scan. The thing is, I unchecked it from Maintenance Settings Friday night and it still happened last night (and it was kind of weird last night with daylight savings and all..) also, does the "wake up" to scan boot a completely shut down computer or just one idle/asleep?
After searching on this forum there seems to be some issues with Avast 2014 and boot issues. My 8.1 doesn't have any slow booting issues but perhaps it's related that this is the anti-virus I run.
I checked the Event Viewer Log and selected Power-Troubleshooter but I didn't see an event for the past two nights. powercfg lastwake command displays "Wake History Count - 0"
I never encountered this issue with Windows 7 or Windows 8 so it's hard to imagine it could be BIOS related?
View 9 Replies
View Related
May 23, 2014
I got a 2013 HP laptop Windows 8 and when I attempt to do recovery,restore or even a Img bkup it goes to a black screen with mouse cursor that I'm able to move around but it does nothing else even if I let it sit for hours. I tried to use the built hp software to make a factory recovery disc but it said there was no recovery partition as if it were deleted but in fact a quick look with windows explorer shows it does exists and it perfectly intact plus the disk management shows it intact, healthy and labeled as recovery. As I said before I can reboot into the menu to choose to recover, restore and everything else but once I select one i get the black screen with the mouse arrow. Im trying to avoid buying the discs from hp. Would there be something possibly hiding or blocking the recovery partition ? Maybe a bad registry entry ? I've tried setting folder options to show hidden files and system files.
View 2 Replies
View Related
May 12, 2013
I have attempted to remove the login by following directions to a screen that has a list of users and a checkbox that says user must enter username & password.
I can only remove it from the third item on the list. It doesn't fix the windows 8 login problem.. I have tried selecting the other 2 on the list, I can't select them I have tried everything I can think of, nothing works.
I think if I could get to the second one, it also may fix a problem I have in my Comcast email area which refuses to save my password login there, even though cookies are enabled, and I have tried to select "save password" a million times.. I am in password hell at work, now I am being forced to be in password hell at home.. Extra problem is that the password they want me to have is something I set up to match my work password at the Microsoft forums.. It was about six months back, later my company forced me to add one more forced item of a capital letter, so my work password has a changed capital letter to it.. I can't change my home password, because MS sees a change of just a capital letter as "not good enough".. So I am constantly typing in my work password to get an error, then at work I am starting now to forget to capitalize.. It is insane.. I swear the more people force password requirements on you the more insecure you get as you have to start writing them all down.
View 1 Replies
View Related
May 2, 2014
I've already tried the whole regedit thing where I changed ProgramFilesDir and ProgramFilesDir from C: to E:
I've only got a 60GB SSD drive where Windows 8 is installed but I've got a 2TB HHD where I want to install all new programs.
My SSD is now full and I can't download app updates or update to 8.1 due to lack of space.
Would it be easier to move windows onto my HDD? And if so, how do I do that?
View 4 Replies
View Related
Aug 19, 2013
I tried the sys command which used to work under older operating systems.
View 9 Replies
View Related
Sep 27, 2013
I had one sata drive wanted to add second sata as data drive.i disconnected older hard drive connected new one,installed windows 8 on it,everything went fine.I did not format older drive yet,reconnected it afterwards,changed boot order in BIOS but the second sata drive reads bus number 0,one with operating system reads bus number 1.Is this O.K.?Usually bus number 0 should be the operating system is on.How can I change this?
View 9 Replies
View Related
Jan 11, 2013
Alright, I just installed my Windows 8 Pro from a USB drive as I was installing it I was installing Windows 8 on the W:/ drive but once it was installed I came to found out that that My C:/ drive which was originally Windows 7's drive letter now belongs to Windows 8, and now the drive that is now Windows 7's is D:/ is is possible to change it back a W: drive or something? and yes, Windows 7 is the main partition on the system, I'm not sure why it changed but it's actually the first time this has happened.
View 1 Replies
View Related
Jan 7, 2014
I want to install windows 8.
currently i am using windows xp on C Drive.
I want to install Windows 8 or windows 8.1 on D Drive.
When i boot the pc will it prompt me to go to Windows xp or Windows 8.
View 2 Replies
View Related
Aug 21, 2013
I had windows 7 installed on [C:] I then split [C:] into two renaming the other half to [F:] I then installed Windows 8 on [F:] and removed C: and gave the free space back to [F:] Now I just have [F:] and I want to rename it to [C:] but I have been told that you cannot with a system boot partition. Is there any way that I could manipulate the drive.
View 8 Replies
View Related
Aug 6, 2014
I am planning on building a new computer, and I want to put a 250GB SSD (Samsung 840 EVO) in it to use with 8.1 Pro. However, most of the programs and data I need are still on the old computer's boot drive, specifically all of my STEAM games (none of which I have the DVDs for.)
My question is if I can create symlinks to the old boot drive without losing data on it. This will most likely be a temporary measure, as the drive's a fairly slow 5900RPM Barracuda, and I want something faster, but I can't afford a better one just yet...
View 4 Replies
View Related
Sep 15, 2014
Computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. bought this from somebody with no windows installed on it. computer came with no cd's. bought a new copy of windows 8.1. i have the computer hooked up to a 720p hdtv with an hdmi cord. everytime i am hitting enter to boot from the device options it just keeps blinking but it wont boot from device. i think since i am using a tv and not a monitor it may be cutting off some other options on the screen on the bottom that i cant see? or is there something wrong with the computer. i believe the person used the computer before me for about 6 months or so and deleted what ever operating system he had on it before giving it to me. read some stuff about possible uefi bios legacy boot but not sure?
View 1 Replies
View Related
Mar 29, 2014
Over the last few days I built a new PC with ASUS A87 Pro MB, no PCIe cards, and Samsung ssd 840 Pro boot drive. Lots of changes on a daily basis. For a while, the FAST STARTUP hybrid boot was working. Then it stopped, and I'm trying to debug it.
When PAST STARTUP is enabled in power options, I get a repeatable Critical Error - Windows did not shut down properly, and the startup time is as long as it would be without FAST STARTUP enabled. There are no BSODS, and no apparent harm from the Critical Shutdown error.
View 3 Replies
View Related
