I recently bought a new laptop and I want to take the SSD from my old laptop and put it in my new one. Normally not a problem but I have a lot on my SSD that I still want to be able to use on the old laptop so I was trying to clone it so I could still use things like Office 2010. I have tried various cloning programmes including Clonezilla but none of them worked. The latest I used was EaseUS and it seems to have cloned the drive and partitions ok. But I put the HDD I used as the destination into my old laptop and it will not boot up. Would this be because of drivers etc associated with the SSD?
My next thought is a clean install of windows 8.1 onto the HDD and then using the recovery image I made recently. But I am a bit worried about that, because if the SSD drivers do cause a problem it wont work and will waste my time.
I recently purchased 3 identical Gateway laptop computers to set-up and ship to relatives overseas. All three are running Windows 8. I want each one of them to have the same programs and applications without spend hours or days setting this all up. Is it possible to burn an ISO image of one hard drive and use it to clone the other two identical laptops? I guess sort of like the old "ghost" process. If so, would I need to wipe the other drives first?
I'm a heavy OSX user so I don't know a whole lot about this, but my son uses Windows because he likes to play games. I'm trying to upgrade his boot drive from a 1TB HDD to a 512GB SSD.
Last night I used Norton Ghost to try to make this happen, but after it completed, the SSD is not booting. I swapped it back to the regular HDD and it's fine. So, I suspect I did something wrong since I don't know too much about this.
The top photo shows the settings that I chose in Ghost. I can give an explanation to why I picked those if any one needs to know why.
The bottom photo shows the results of the clone. The top drive is the original 1TB source, the bottom one is the SSD. I had expected Ghost to pull the smallest EFI system partition, but it didn't. The SSD does have enough space for the data.
The recovery partitions on the original drive... I do NOT want those on the SSD. I have a flash drive that I will use to make recovery media. I don't want to waste space on the drive for recovery.
The source and destination drives were connected to a second PC and were NOT the boot drives.
I have a brand new ASUS G750JX running Win 8. The OS is on a 750 GB HDD and I would like to install a 256 GB SSD and move the OS and a few programs to the SSD. Can I clone the drives than use 750 GB HDD for storage? Or is the a better way of moving all the stuff to my SSD?
I have over 600 GB on my HDD from games, media, and files. I bought a 250GB SSD to boot my OS off of and put some selected programs on. Even after deselecting all my media files, there is still too much on my HDD for the included Samsung clone client to proceed. I just want to use my new SSD as a boot drive for the OS and for several programs while retaining all my other files on my existing HDD.
Any good program that will allow me to clone my system which is a PCI-E storage device (OCZ Revodrive 350) to a hard drive for backup purposes and of course boot from that hard drive if required to reverse the process?
I have a AIO Sony Vaio Tap 20 that I really like, but I want to run off of a different HDD that is a hybrid drive (SSD + HDD) to increase the responsiveness. I have cloned the drive using Macrium's Reflect, but the drive won't boot. At power up, it says "a required device isn't connected" and I can get into several things like the BIOS, but the BIOS is so sparse there isn't anything to do. If I put the original drive back in, all works.
Sony claims that cloning isn't supported, but I wonder how it even knows the drive is different. I wonder if I can overcome it.
I have 20 new, identical Windows 8 laptops to be set up with the same settings and applications. Can I set one up and disk-clone the rest or am I screwed?
It always fails to Clone/copy my current hard that has bad sectors, to a new hard disk. My present HDD is a 320GB and its health is really bad. I bought a new 500 hard disk and tried to clone and copy the whole HDD. I tried Paragon HDD Manager, O&O disk image and other two Software. All of them failed to clone or copy my old hard disk to new one.
What is the best solution. Paragon, copied data partially and gave an error at 80%. I tried few times and the same thing happened
I have a Win 8.1 laptop without a disk drive which also did not come with a cd of operating system. What software, preferably free, can I use to copy my operating system to USB in case I ever need to reinstall Win 8.1?
How do I just copy the operating system without all the software I have added since acquiring this laptop?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
I know there is good software out there to clone/image my hard drive and restore it to a new SSD drive. I'm just wondering though, since my laptop is brand new, I made a full recovery to a USB drive and included the OEM recovery partition.
Couldn't I just swap out the old HDD with the new SSD and boot with the recovery stick and do a full recovery back to the new SSD?
Also, however I do this, recover or image backup/restore, do I need to do some type of SSD alignment? I can't find a clear answer on that.
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection Others say: <F8> No uefi setup option in boot selection I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
I've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
