Setup Installation :: Bluetooth Not Recognized Windows 8
Jan 10, 2013
I have a tablet that I installed Windows 8 Pro on.
Actually, I have installed Windows 8 Pro on 2 of these same tablets with the same problem.
They both have bluetooth and the bluetooth is on...and Windows 8 installs a driver for the bluetooth, but there is no bluetooth icon down by the clock in the systray.
From my understanding of Windows, if that bluetooth icon is not in the systray, something is not configuired right.
I can use a USB bluetooth dongle, and after it installs those drivers the bluetooth icon is present the systray. So, it likes the dongle. But, I don't know what the issue can be with the onboard bluetooth.
All of a sudden I can't reliably play any video media on my Win 8 64bit computer -- was working fine yesterday and AFAIK nothing (other than perhaps Windows automatic updates) changed. My first thought was to try and restore but even though I'm sure I created a restore point it tells me there isn't one. Sigh.
Okay, so then I try to perform a reset (but keeping all my files) and it tells me some files are missing and to insert my recovery media. All well and good, I actually have that (and know where it is) but when I insert the disk it tells me it is NOT a recovery disk.
It is, of course, precisely that -- a Windows 8 Recovery Media for Windows 8 Products 64 bit. I am running an official copy of Win 8 (well, 8.1, but I have no media for that since it was a free update). Yes, it's OEM (Dell) but that shouldn't make a difference. And, more importantly, what I am to do now?
I am using Inspiron 1545 which has Dell Wireless 365 Bluetooth Module which is of broadcom. When I try to install driver compatibility issue comes up. It doesnt proceed even though i have marked compatibility as windows 7 or vista too.
I have tried using the broadcom tool to detect the device and install the driver but that also fails to detect the module. And when i use my second OS windows 7 bluetooth works flawlessly. So its only windows 8 not able to detect my hardware. I have also checked in device manager and there also it is not present.
I set myself up as System Administrator during installation. When I try to load the software from CD for a 5510 HP printer I get an error saying I cannot do it because I am not a System Administrator. I have verified that my profile show me with that designation.
Installed windows 8 on blank HD. Version was enterprise. Went through installation process, then discover that the wireless adaptor (laptop, built in) wasn't being recognized FULL stop by windows. I tried a few things. In the device manager, the wireless adaptor is not shown. However, after updating the device list, it shows one unknown device.
I looked through the preloaded drivers for wireless devices, but all of them were for USB ethernet/wireless adaptors, which as I recall from my previous installation of windows was not the type of driver that the device was using. I've also gone through the automates troubleshooting, etc, but nowhere is it even acknowledged that the device is even there. Now, my initial thinking is that it is indeed something to do with the drivers, but I'm not sure if I can find the needed ones. I'll upload more detailed information about my setup if it would be useful.
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I am trying to setup a new Windows 8 computer that is going to be a gift. I need to go through the setup procedure so I can install some software which is also part of the gift. How can I do this without having to use a Microsoft account, or at least with leaving the least amount of account remnants for the new user?
I have tried updating my Windows 8.1 Pro (64-bit, upgraded from Windows 8 Pro) with the new "Update 1" (KB2919355) but it always fails with ERROR code 8007005 (or 80073712).
What I have tried do to fix:
Run WindowsUpdateDiagnostic (that e.g. removes files from C:WindowsSoftwareDistributionDownload and cleans Windows update history metadata info)DISM.exe /Online /Cleanup-image /ScanhealthDISM.exe /Online /Cleanup-image /RestorehealthDISM.EXE /online /cleanup-image /startcomponentcleanup
After all of this, still the update (KB2919355) fails
There must be something that Microsoft needs to fix, there are xxxxxxxxxxxx amount of similar complains and reports out there...
I decided to install Win 8.1 RTM x64 yesterday but what I expected to be a breeze turned into a nightmare. Installation fails, I am even unable to get into Safe Mode.
I was running Win 7 Ultimate x64 before without any issues whatsoever.
I already described my issues here, with errors and logs: Windows 8.1 RTM installation fails on Dell XPS 1340
Changed memory from 2x4GB to original 2x2GB but completely same issue
I have recently formatted my old windows. But now I am not able to install windows 8(actually even windows XP and seven) . When I try to boot from USB setup starts But 'Getting files ready' (which is second step of installation) stucks at midway like at 14% or 52% or 74% i.e. at any arbitary percentage and nothing happens . Actually I am able to move my cursor but installation no more proceeds further . I have tried to format many times and to run installation but everytime installation stuck at midaway without any error .
My laptop specs are : Acer aspire 5745 , 500GB HDD , 3GB RAM , intel core i3 processor
I have Windows 8 consumer preview installed on my laptop. A couple days ago its licence expired, so I got Windows 8 professional to upgrade.
I made an install USB with the win7 USB utility and proceeded to boot from the stick. The setup then told me I should restart my pc and restart the installation from windows.
I did that, but Windows 8 setup won't start. It just starts reading from the usb for a second, then stops. The setup from the .iso I downloaded does the same thing.
To make things more interesting, the first time I restarted my PC after trying to upgrade windows from USB at start-up, I ran Windows 8 setup and it did start and started doing some things, on that small blue screen that pops up. I didn't pay attention to it until the blue setup screen disappeared and nothing else happened...
One more thing, I tried to install Microsoft windows server 2012 on my laptop a month ago and the same thing happened with the setup.
Did a few hours of research on the internet, tried to run it in compatibility mode.Can't really afford to do a "clean" install now, and on top of that, my PC reboots every 2 hours because my licence is expired...
Windows 8.1 RTM installation says (Display) not supported
1. I tried with windows 8 x64 RTM upgrade,it started and after restart it displayed display not supported
2. So I tried with windows 8.1 x64 beta upgrade still same msg,so itried updating all display drivers and other driver and tried again still same message
3. So tried clean install with windows 8.1 RTM, still same msg diplay not supported
I just finished building my computer. Clean SSD and HDD.
I boot on USB with Win 8 in it.
I go through with it, installing on partitioned first and after failing that on unallocated space.
Both ways result in the installer preparing files, going through everything fine. Then at the end of that window my computer restarts and starts the whole set up all over again.
I'm currently using windows 7 and want to install 8.1
I just launched the setup, and on the window where it asks what to keep, the only option is 'Nothing'.
Does windows 8.1 setup delete everything I've got on my current partition, or will it transfer my current system into a windows.old folder like Windows 7 Setup does?
I previously setup a DVP 11 pro tablet by logging in with my outlook.com email account.
Now I am about to setup an AIO desktop . So I am sure the same questions will be asked about logging in with email account and password when first powering up the computer.
My questions are:
a) Should I use the same outlook.com email and password for the second computer as the first ? Will Win 8 even accept this because one tablet is already setup using this same email address and pw . Even if it accepts what are the implications?
b) I would prefer not to sync the Tablet and the AIO computer . In this case should I setup another outlook.com account with separate email address and PW? I guess I can do this by clicking on setup a new account .
c) Actually I would prefer to setup the 2nd computer with local account . But from my experience with the DVP 11 Pro , this option is not available in the setup screens. ie I can't get pass the the first screen that asks for email and password. Since this is a purchased machine and not a clean install , I believe the only way to do this is to first setup with an email account then subsequently disconnect and setup local name and password.
On Windows 8, from time to time, all of my USB devices suddenly stop working, and the systray notifies that my "USB devices are not recognized." A reboot rectifies the problem, but the problem happens about once or twice a week.
Just a few weeks prior I had all of my USB devices going to a powered hub, which then was plugged into my computer. I happened to change motherboards from a Biostar 770E to an Asus M5A97 R2.0, which has plenty of USB ports. I hadn't bothered to eliminate the hub yet, and just as with the old motherboard, this one exhibited the "device not recognized" error. Ah ha, I thought! My USB hub has gone south.
So I threw it in the garbage, and plugged all of my USB devices directly into the motherboard (USB 3.0 portable drive, Logitech M705 wireless mouse, Belkin Wireless adapter, printer, and Remote Wonder. So I was quite surprised today when my USB devices dumped out, and Windows messaged me that my "USB devices are not recognized." I should note that I have installed AMD chipset drivers from the Asus website, as the board was quite unstable without them. With the Biostar, I opted not to install third party chipset drivers and it ran fine without them.
I have just installed windows 8.1 on Dual Core Laptop. Just wanted to know how can I create a backup of my Windows 8.1 installation so that in future if Windows crashes I can restore the installation+other s/w installed, like we do fresh install of Windows through USB boot.
My friend has an ultrabook (hp envy 6-1113tx) which came with windows 8 pre-installed and after of more than 1 year of usage the OS became unstable and sluggish so he wanted to do a reinstall. I made bootable usb and enabled the legacy mode in BIOS after which the usb became visible in boot options. But it didn't show any HDD to install the OS on during installation. And also the HDD partition style is GPT.
I want to try creating a Windows 8 installation USB on my computer and using it to try booting up and repairing my friend's computer which is stuck in recovery mode.
If I put the installation files onto my own personal flash drive and create an installation USB out of it, would I later be able to delete the files off it and continue using it as a regular flash drive?
I have an HP Envy with Windows 8 pre-installed. I am trying to do a dual boot setup with windows 7, as some of the software I use daily, is not compatible with Windows 8. The new software has yet to be released, and will not run in any compatibility modes.
Knowing this is beating a dead horse, I have searched for hours, and have gotten some of the pre-req stuff done ie: created virtual drive 20gb, initialized it, turned UEFI Mode/Secure Boot OFF, etc.
I can see the vhd, but when I try to load win7, the vhd is not visible. When I exit win7 install, and Windows 8 reboots, I can no longer see the vhd.
Few days ago I bought a new Lenovo Thinkpad Edge E540. It has two USB3.0 ports and one USB2.0. I bought the machine without OS and installed Windows 8.1 Pro(x64) myself. Everything seems to be working fine except when I want to use My WD Elements 1TB external HDD in USB 3.0 port. It just doesn't get recognized. In USB 2.0 port it works fine.
What I've gathered and tried so far : - Device manager does not show anything not even Unknown Device , yet my USB 3.0 Kingston pendrive works fine out of the box in the same slot - I'm pretty sure the USB power is not the issue because the WD HDD , when plugged, starts blinking for a while , then lights up fulltime and i can feel and hear the drive spinning - I've disabled USB selective suspend in my Power plan - I've disabled Fast Startup - In msconfig , im stuck at "Selective startup" (if changed it doesnt even let me APPLY and switches back to Selective right after I close/change tab in msconfig, I tried doing it in safe mode , same thing)
Using my harddrive in USB3.0 speed is essential for me.
Windows 8.1, Broadcom 802.11n network card&driver,
My computer stopped recognizing the wireless networks at my university - oddly enough, some other networks elsewhere can be found (although I cannot test if I can actually connect to them, since they are passworded/not mine).
I followed the 3 steps of Network Posting Tips
Xirrus Wi-Fi Inspector showed nothing: Connection - Broadcom 802.11n network card - NA, everything under Wireless and Addresses also NA. No networks.
Have finished upgrading to Windows 8.1 and my RAID-5 ReFS volume has NOT yet been recognized. It was not available in "This PC" after the upgrade... and was still not available after using the ReFS registry hack. After applying the hack and restarting the computer, the only change was the System Reserved portion of my C drive became visible.
Under Administrative Tools> Computer Management> Disk Management, the drives in question are visible as a single RAID-5 volume but Status shows "failed", the file system entry is empty, and the drive letter is absent showing a red "x" icon.
Currently downloading the latest chipset, SATA AHCI, and graphics drivers for my mobo. Will update once those have been installed.