Security :: How To Keep UAC Enabled And Run Connection Script With Permissions
Aug 16, 2013
I have a script which runs when connecting to our vpn however it fails to set routes due to the lack of elevated permissions. When UAC is completely disabled (using the registry) the script works perfectly however certain windows 8 features don't work, such as the metro apps.
Basically I'm looking for a way to keep UAC enabled and automaically run the connection script with elevated permissions automatically, fully scripted or some sort of a work around to automatically set the routes when connected to VPN.
I would like for my computer to sign in automatically with my Microsoft account, however, when I enabled Remote Desktop Connection (for I would also like to be accessed remotely), the automatically sign-in function doesn't work, because sign-in screen is now set by default to log in with local account rather than Microsoft one. However, I do not possess one, and if I tried to create on and make it sign in automatically, the screen said wrong username or password. Which I don't understand at all.
I have a 1TB HDD connected via the network. 90% of the folders on this drive are fine, but a few were created by previous Windows installs.
I needed to delete the folder but it won't let me do so. I've tried fiddling with the security settings but they wont "stick". See the attached for what I mean.
I can't do anything with this folder. I can rename the folder, but everything inside the folder and the folder itself cannot be removed.
I read one online article that said to "click the Windows 8 start button", and I gave up on that article. I can't figure out how to set a restore point with Windows 8.
I was also told that I needed to "enable security". I would have thought that would have been enabled automatically, but I guess not.
The "robust" security settings in Windows 8. I only use my computers at home and have no worries about anyone stealing data. The problem is that when I try to copy, move or delete files I am frequerntly presented with "access denied". Now, before anyone starts ragging on me about the 1000 other posts on permissions, let me say that I have read many of these posts, but the problems persist.
What I want is a foolproof way to disable ALL security settings on Windows 8 in such a way that I will NEVER see that "access denied" message again. I wish to do this for entire hard drives, boot drives as well as data drives.
I can't seem to get Secure Boot enabled on my laptop, the secure boot option is greyed out and I can't change it to enabled, my computer came with windows 8 on it automatically so I thought it would've been enabled by default.
I can't create a simple text file and place it on my C: drive in Win 8.1 - says that I don't have permission. The properties of the drive show that I do - full control, every class of user. Am I missing something really simple?
There is a folder left over from an uninstalled product called "Symantec". When I attempt to delete this, I get the message "You require permission from SYSTEM to make changes to this file". Clicking the "Try Again" button does nothing and the same message reappears.
I have tried to take ownership of the file through Properties > Security > Advanced, however, I get this error:
"An error occured while applying security information to (file path). Failed to enumerate objects in the contianer. Access is denied."
I have also tried to use an elevated command prompt to run the takeown command on this directory, however, get the "Access is denied." message for all files.
how to delete this file - unlocker does not work either!
I have strange network problem these days. I have a desktop PC and installed Windows 8.1. And I have a LAN. The gateway IP address is 192.168.2.1.
The network works fine when I start the PC. I can access Internet with IE, I can access the config pages of my gateway and I can SSH my local File server. It's a synology ds212j. I assigned static IP address 192.168.2.18 to it and name it as "home_ds". I add dns entry in file "hosts".
But there will be very strange problems if the PC keeps running about 2/3 days. It seems I can't connect to other computers from my PC. No IE, no SSH, no ftp.... But ping still work. These is no network device listed in my network folder. But I still can access the mapped network drives.
For example, I can ping www.google.com, I can ping 192.168.2.1 and 192.168.2.18 and "home_ds". K:> ping 192.168.2.1Pinging 192.168.2.1 with 32 bytes of data: Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Reply from 192.168.2.1: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.2.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 13ms, Maximum = 61ms, Average = 32ms
But when I try to telnet and ssh, all failed.
I tried: telnet www.google.com 80 telnet 192.168.2.1 80 telnet 192.168.2.18 22 all failed.
I tied putty, msn, outlook,... all failed. But my wife's PC works normally at the same time.
In the network folder, there should be a list of all my network devices, including my wife's PC and my File server. But it's empty if this problem happens. However I can add them mannually and I can access the network drives.
And I can connect to my PC from my wife's PC with remote desktop.
If I logout and login again, the network will recover except 1 new problem. That is I can't access the network drives of my File Server with computer name "home_ds", but IP address works. And I can ping it with computer name.
K:>ping home_ds Pinging home_ds [192.168.2.18] with 32 bytes of data: Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Reply from 192.168.2.18: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.2.18: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 11ms, Maximum = 30ms, Average = 19ms
A restart will solve both the above 2 problems. But I don't want to restart my PC so frequently.
I tried to solve this problem by update windows and drivers but failed.
when i connect my hp probook 4520s to my sony vpcyb4ajg with Ethernet cable on my Hp wireless disconnects and can not be connected until i disconnect lan cable. but on my sony i have both wired and wireless connections simultaneously
hp:Windows 8 x64 realteck Ethernet and atheros wireless
Windows 8/8.1 is supposed to have superfetch disabled automatically when it recognizes a SSD, but mine is enabled. I have a SSD but also a secondary HDD that is accelerated with a 25 mSATA SSD via Intel Rapid Storage Technology. I'm assuming since the second HDD is enhanced with a SSD then there should be no reason whatsoever to leave superfetch on.. I'm thinking I should turn it off, and if there's anything else you think I should do to improve my settings or stop any services I don't need,
I enabled Hyper-V on my computer. When it restared I saw it was configuring Hyper-V. I didn't opened Hyper-V the same day. Two days later, I wont to open Hyper-V but I can't find it anywhere! Also, it isn't listed in programs anymore... I also enabled virtualisation in the BIOS.
I recall enabling some sort of monitor/feedback to MS service after or during the update from win 8 pro to win 8.1 pro. But I dont recall what it was called.
Now my cpu is running 50%+ much of the time fr no apparent reason.
Windows Host Process Tasks .... or some such thing shows in the Task Mgr when it is throttling my cpu....and runnig it 50%+.
How can I find and disable the service that is causing this?
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. I think this was "Application information" service.
The problem is that now I can't run app called Turbo Service Manager to backup, services.msc, regedit, elevated cmd to use "net start", msconfig, even *.reg files won't launch. I can't launch Safe Mode through metro because my USB mouse and keyboard disconnects at the moment I should choose "4".
I just freshly installed Windows 8.1. So here it goes. I use folder redirection for my user profile folders. I'm redirecting the folders
from: C:UsersKevin
to: C:UsersKevin
Before redirecting them though, I copied the exact ACL's (permissions, owner, inheritance, etc.) of the C:Users and C:UsersKevin folder to the D:Users and D:UsersKevin folder, respectively.
I then created the appropriate user folders under D:UsersKevin and did the folder redirection. The problem is that any file/folder inside the D:UsersKevin folder (doesn't matter if it is deep in the child folder as long as the parent is the D:UsersKevin folder) that I "share" the ACL permissions get messed up. When messed up, I mean that if I share the folder to the owner, which is me, the permission that will be under the security tab will ONLY BE ME. It seems that it's breaking the rules of NTFS permissions wherein everything is cumulative.
This does not happen if I do the same in the C:UsersKevin folder or even in the D:Users folder.
Originally, the permissions of the D:UsersKevin are SYSTEM, Administrators, and Kevin with Full Control. That is the exact same ACL for the C:UsersKevin folder.
I tried adding the authenticated users (modify) and users (read & execute) and that seems to solve the problem.
I was using my laptop with everything going smoothly. USB port with adapter and CF card inserted. Ear buds in audio port. I decided to close the laptop which automatically puts the system in hibernate (or whatever it does when fast startup is active). Everything looked good. Now when I come back to it, open the lid and begin to startup from hibernate state it gets hung in the bootup and will not proceed. I have tried holding the power button to shut down and then restart -- no joy -- comes back to the same hung screen. Have tried holding various escape keys with startup -- no joy -- back to that same hung screen. Is there some way to bypass the hyberfil file which is probably corrupted, and get back to a full cold boot and restart from scratch?
I've Windows 8 Pro, I've enabled the Hyper-V and I've created two VM's. One is a WinXP and the other is a Win7. They seem to be working fine, however I can't connect to the internet with them or view them on my lan. I've tried using Legacy network Adapters, network adapters, googled to find people saying things like there's issues with my physical network setup...
since installing I now have a notification in the systray saying that " Files are up to date, last updated xxx minutes ago When I click on that notification icon, it takes me to a Sky drive folder, and within it is a documents, favorites, public, and shared favorites folders. When I double click those folders, there are no files within them.I do not have Skydrive set to upload, or sync, any files. So then should I be getting these notifications? Why would it show updating empty folders when Sky drive is not enabled? Is there a setting somewhere I should change.
So we got this computer brand new with Windows 7. We wanted Windows 8, and performed an clean install of Windows 8, manually formatting the partitions, meaning deleting of every recovery partitions and so on. Windows 8 booted fine, and everything worked fine, installed new drivers through Samsungs own "Windows 8 SW update"-software. Installed new updates through windows update, and everything seemed to work just fine.
But then, suddenly when the PC have been left alone for a while, and I think I can provoke the same issue by hibernate and start up again, the wifi can't connect to the wireless network, which the networks router could be found 1 meter aside. You then get the "network available"-symbol, and we can go on and try to connect to the network. The PC tries to connect for a while, and then it seems to just kill the wlan-card, like it has been disabled, and now the PC freeze. We now have to hard-reboot it, and wait for login, and then clean reboot it, and then again at login everything works fine. To the next time the PC have been left alone.
So the problem look like this; hibernation->wifi connection lost->wifi available->re-connecting to wifi->wlan-card disabled->PC freeze
What we have tried is to uninstall all wifi-drivers, install different drivers, from Samsungs site, windows pre-installed drivers, driver software-drivers and so on. Just to add, we also have this 7 series computer from Samsung, everything works fine.
I set up my administrator account and standard user account. Both are Live. Alienware Laptop. On the standard account, users can not even run a game (original Fable that requires disk to start up) without it asking for my password. Which is not always convenient seeing as how I work and all. How do I allow standard users to run programs but not make changes to the computer? So far I have not seen any threads about this. I've been going around in circles in control panel searching for anything that would allow me to grant permission permanently but so far I have found nothing.
I'm on a new laptop running Windows 8 Pro, and I'm running into permission issues. I just created an icon (using Axialis Icon workshop), and tried to save it to a folder which I myself created. But I got this message:
C:Program FilesIconsIN-USEGS.ico You don't have permission to save in this location. Contact the administrator to obtain permission.
Would you like to save in the My Pictures folder instead? No, I wouldn't like to save in My Pictures. I never use it. How can I get permission to save to the folder I want? I'm a sole user; I'm a member of administrators; I've tried (unsuccessfully so far) to give myself permission to run all programs without being nagged.
I suspect that taking ownership of the C:Program Files might do the trick, but it seems like an extreme measure. Should I simply follow the steps in Brink's tutorial 'How to Allow or Deny Access Permissions to Users and Groups in Windows 8'?
I recently formatted my computer, installing Windows 8. And I realized one of my HDDs was acting weird. It doesn't allow Chrome to save files, it asks for UAC permissions when I try to delete, move or rename files. I looked it up, decided it was about ownership and permissions. Permissions were already set, full control. But ownership was wrong so I fixed it, rebooted my computer and problem still persists at the moment.
When I right click and go to the properties of a folder, it says "Read only". When I uncheck it and Apply, it "applies" it to the subfolders with a loading bar but it still remains "Read only".
I was playing with that folder in order to change the icons, so I changed the permissions so it could let me in... now I want to change it as it was before! How do I do it? I saw my name twice as users with permissions, so I deleted one of them but couldn't delete the other.... I still have access to the folder.
I would like to nuke system for clean install. I understand there will be system reserved partitions, however, my main concern relates to OS and DATA partitions - Review attached screenshots :
150 GB for C (OS) drive? 30 GB for RECOVERY? Remaining for DATA?
I am unsure where did I read RECOVERY should be the last partition - how would this be accomplished?
I recently installed Windows 8. I have apply every requirements that is in windows for password. In settings it is set and also in power option....
But when I restart my pc or when i shut it down and turn in it back on it doesn't ask for password and it goes straight to start screen but it does ask for password for sleep and hibernate. Its very important to me to have protection.
