Network / Sharing :: Wireless Card With Poor Reception And Dropping Connection?
Sep 14, 2013
I have an HP m6-k015dx and it has an intel centrino 2230 wifi card in it. I also have an old, netgear wna 1100 usb wireless adapter. The wireless usb adapter I have gets extremely better wifi connection that the internal adapter and the signal strength on the networks won't fluctuate. Are there any settings I can change on the intel adapter, or can I buy a new internal adapter to replace the intel to get better reception?
View 5 Replies
ADVERTISEMENT
Jul 7, 2014
This is a 6 month Old Gateway Laptop, Windows 8 preinstalled. Broadcom Network Adapter.
I have a Buffalo WZR-300GB Router (2.4mHz, with 802.1/ 11g/b/n) all working. There are 4 wired and 3 wireless computers on the network. Wife's Gateway (Windows 8) is the ONLY one with [wireless]dropped connections. No MOVE has been made with Her Laptop or the Router.
This is the troubleshooting I've have done so far.
Uninstalled/reinstalled network adapters.Reset the adapters. Scanned Hardware changes (before/after) in the Device ManagerTurned off Power Management.Disabled the Lan (wired) connection-adapter.Removed (Forget this Connection) 2 other wireless connections from outside the home.Wireless Adapters are set to "Maximum Performance" under (edit power plan).Moved to Laptop (actually the 1st thing I did) to 2 different locations with same results, dropped connection.Under settings the Topology is all Checked, Except 2 I have never seen before. Multi-Layer Protocol, and Kernel 64 something. Anyway, when I insert a check mark next to both. I'm Prompted "Do you really want to disable this connections?" I have done both (checked/unchecked) nothing changes.Under Device Manager: Restore all Hidden Adapters, About Five More adapter showed up I had never seen before. So then I Scanned for Hardware Changes. No effect!
View 1 Replies
View Related
Feb 1, 2014
Recently bought 3 laptops for the household (1 HP Envy TouchSmart m7 Sleekbook, and 2 Gateway NV570P10u Touchscreen Laptops)
Laptops came with Windows 8, I immediately upgraded to Windows 8.1 so I cannot say if things were working when I had Windows 8
I have all these laptops connected to the Internet via DLink-Dir655 Router. Additional devices connected to the router/internet are a wireless printer, server running Windows Server 2008, laptop running Windows XP Professional, and a laptop running Windows 7 64-Bit Home Premium (along with couple cell phones running Android). All other devices have absolutely no connectivity issues ... Only the 3 laptops running Windows 8.1 keep giving us headache to a point we can hardly connect to the Internet using these (Winows 8.1) laptops
Interestingly, when I connect laptops via Ethernet cable connection is "little more stable" but I still get disconnects ("page cannot be displayed" errors) which leads me to the conclusion that it is not Wireless card always but Router or its settings are also playing a role.
We can focus on HP laptop to address this issue. It has Intel Centrino N-2230 as its built-in wireless card. Was having lots of disconnects or pages partially displayed but when I attached an old MediaLink Dongle (USB WiFi Card), internet connection became lot more stable. It is atleast 10x more stable compared to built-in wireless card but I still gets disconnected even with this dongle (and Ethernet cable as mention before)
PS: I tend to believe it is router's compatibility ... Otherwise why Ethernet Cable is giving the connectivity issue? But router is listed as compatible with Windows 8 on MS Website and Ethernet connection is 10x more stable than Wireless connection.
View 8 Replies
View Related
Oct 22, 2013
I'm going to throw my hat into the ring of people with wi-fi issues following an update to 8.1. on a brand new Alienware 17.
After the update to 8.1 last night, wi-fi will connect and then drop out after I start transferring data (browsing)
The only remedy is to either restart, or "forget" the connection and re-establish. At which point it will again only work for several minutes, or until I start "using" it.
Wireless adapter is a Broadcom BCM4352 Wireless adapter.
View 9 Replies
View Related
Apr 26, 2013
A friend of mine just bought a HP Envy dv6-1148ca and the LAN and WIFI keeps dropping out.
He has re-installed Windows 8 twice with the same results.
System specs:
Windows 8 64bit
AMD A8-4500M
8GB RAM DDR3 800MHz
750 GB HDD
AMD Radeon HD 7640G
Ralink RT 3290 802.1 bng WIFI adaptor - Driver v5.0.2.0 Date:2012-08-08
Realtek PCIe GBE Family Controller - Network adapter, Driver v8.3.730.2012 Date:2012-07-30
Searches showed others with HP laptops having the same issues, no one seems to find an answer to this problem.
Secure sites seem to be more stable, but do drop out.
Some sites won't start at all, others start but drop out after 1-3 hours.
We have reset the Power Management to not 'Allow the computer to turn off this device to save power' and still the same.
Other laptops on same network are having no problems, including other HP laptops, different models.
View 9 Replies
View Related
May 4, 2013
when i connect my hp probook 4520s to my sony vpcyb4ajg with Ethernet cable on my Hp wireless disconnects and can not be connected until i disconnect lan cable. but on my sony i have both wired and wireless connections simultaneously
hp:Windows 8 x64 realteck Ethernet and atheros wireless
sony: win 7 x86 atheros Ethernet atheros wireless
View 6 Replies
View Related
Jun 16, 2013
Recently I have been installed Windows Eight Pro 64-bit in two of my desktop computers. One pc having motherboard Intel DG41 and the other one is Asus Sabertooth P55i. I have two external Realtek NIC card installed in both of the pcs. When I was using Windows Seven 64-bit, I installed PPPOE as follows:
=> Conrtol Pannel
=> Network and Sharing Center
=> Setup a new connection or network
=> Connect to BROADBAND (PPPOE) [something like that]
But when I am trying to install pppoe on windows eight like the same process, it shows "Unable to install PPPOE" kinds of message and reboot. I thought the NIC card driver was not installed properly so I re-install the NIC card driver and again tried but it crashes and then reboot.
The funny part is, when I plugged the Ethernet cable into my built-in NIC card (the one that is embeded on Motherboard), it doesnt reboot and installed successfully. But I need to use the external NIC card and with that I am unable to connect to PPPOE.
I face the same problem in both of my pc and now I have to use the built-in NIC card. Is there any solution to use the external NIC??
View 4 Replies
View Related
Oct 8, 2013
I just installed a new wireless ac adapter and I do get a 1.3Gbps connection to my router. However when I test this connection by transferring some large files I get about 350Mbps for sending and 600 Mbps for receiving. When I transfer the same files with a 1Gbps wired connection I get about 970Mbps for sending (I think that includes some caching) and 760 Mbps for receiving.
Are there some options in Windows 8.1 Pro that can be set to get better wireless performance?
View 7 Replies
View Related
Jan 16, 2014
Just bought a new Gateway desktop with Windows 8 and can't maintain wireless internet connection.
Connects sometimes, but drops unexpectedly.
Sometimes says it can't connect, but does anyway and works fine. Sometimes it can't see any networks.
Usually can only see my network, though I am in a condominium surrounded by many networks.
My HP laptop (Windows XP) in the same room has a solid connection so I know the wireless signal strength is not an issue
I saw the "unstable wifi" post and tried removing network devices from power saving, that didn't work.
View 1 Replies
View Related
Apr 13, 2013
i use a usb Wireless adapter to acess the internet, and my signal is always good. The connection works fine too. But in some sites (more specifically in a flash video player that i have to use many times) and when i try to download uptades via Windows Uptade the connection just drops, and in most of times i have to disconnect the USB adapter and plug again to re-connect.
I don't use any antivirus, any 3rd party firewalls, nothing. I skirted the updates problem downloading them from the MS site, instead of Windows Uptade, and the uptades have installed fine, but itill pisses me off. The disconnect problem happens sometimes when i try to download something via Torrent (using Bittorrent), but in these days it happens most of times in the Flash player. This don't happen in youtube, curiously.
View 7 Replies
View Related
Sep 17, 2013
So I bought this new Samsung Ativ book4, for some reason at random times the wireless goes to a "limited connection" and I have to reboot the computer to get a full connection. Do you think this is hardware or driver?
I heard Windows 8 is not very friendly with wireless drivers and Windows 8.1 is suppose to have better support for wireless drivers.
View 2 Replies
View Related
Aug 6, 2014
I installed hyper v on my machine which is running Windows 8.1. Then I created a Virtual Switch on my wireless network. After that, it was not working in the VM but the wireless connection in the host was working fine. After that, when I connected to a different wireless network, it did not work. I deleted the bridge, uninstalled hyper v, but it is still not working. I installed hyper v again, but it is still not working. The wireless connection connects to the wireless network after putting the password, but does not give network connectivity to the internet.
I need to get the wireless connection to work again.
View 1 Replies
View Related
Jul 31, 2014
I have windows 8.1 installed on my Dell Inspiron 15 7537 and use a TP-link TD-W8960N modem. Every once in a while (once or twice a day, sometimes more) the laptop would lose connection with the router. When I click on the network icon down at the bottom right hand corner of the screen to try and reconnect, my network would not be there.
This is what the network pop-up looks like when I'm connected. When the laptop drops out, then my network is not shown, only my neighbours one (westham).
When the computer (I have tested 2 different modems and continue to get drop outs so it's definitely the computer) loses connection, I then click troubleshoot and I see that it "resets network adapter" and then my wifi is somehow found again and it automatically reconnects. Sometimes this troubleshooting does not work though.
Now before you tell me to check if I have the latest driver installed, I have checked several times with the dell website and it IS up to date.
View 1 Replies
View Related
May 3, 2014
I have a laptop running Windows 8.1 with Update 1. I have drives mapped to my Windows Home Server 2011 and to my Windows 7 desktop PC. But each time I reboot the laptop it drops the mapped drives and I have to try and map them all over again. I say "try" because most times I have to go back to my other PCs and unshare and then reshare the drives for them to be seen again in Windows 8. Then I can map them again but only until the next reboot.
Same goes for the Windows Home Server 2011 Connector software. Windows 8.1 drops the connection after a reboot and the Connector software must be reinstalled EACH TIME to connect with my server.
I have the SAME user name and password on ALL machines. I have tried mapping the drives with just the username and password as well as with the remote PC nameusername combo but that doesn't work either. Finally I have set my shared drives/folders to have read/write access to ALL users. Again, no luck unless I unshare and reshare.
View 9 Replies
View Related
Sep 2, 2013
My laptop is a Lenovo Z580, the dropping off of internet has gotten worse over the weeks and it now d.c every minute even though it says it is connected in the side bar and i have to reconnect by disconnecting then reconnecting the wireless adapter. I have spent a long time troubleshooting this problem as soon as i come home from work, i have been on many forums and tried many different solutions from disabling power saver management, updating drivers, reseting TCP/IP and winsock as read on this forum and it only makes it worse.
Every other device in my house is connected fine and it seems only to be a windows 8 problem as other laptops/computers in my house are all windows 7 and they work fine, i even got a new router a few days ago and it has made no difference.
I don't really know what to do anymore, just patiently waiting for a windows 8 update.
I had to disconnect/reconnect to post.
View 8 Replies
View Related
Jun 3, 2013
I have Acer v5 touch which I only just purchase A few weeks ago. For some reason every 30 minutes the internet keeps dropping out, When the system Carn't connect I can connect to the internet with my tablet just fine so I dont know if its the router?
My family has reported that there having issues aswill but it seems to be at diffrent times. So I carn't tell if its the computer or network dropping out, I have read that acer has had previous wifi issues a few months ago. This leaves me comfused and how to fix the problem. Its A brand new machine so if it is the laptop why am I already facing issues with it??
Heres the error : [URL] .....
Could it be the computer or network?
View 1 Replies
View Related
Feb 19, 2014
I have strange network problem these days. I have a desktop PC and installed Windows 8.1. And I have a LAN. The gateway IP address is 192.168.2.1.
The network works fine when I start the PC. I can access Internet with IE, I can access the config pages of my gateway and I can SSH my local File server. It's a synology ds212j. I assigned static IP address 192.168.2.18 to it and name it as "home_ds". I add dns entry in file "hosts".
But there will be very strange problems if the PC keeps running about 2/3 days. It seems I can't connect to other computers from my PC. No IE, no SSH, no ftp.... But ping still work. These is no network device listed in my network folder. But I still can access the mapped network drives.
For example, I can ping www.google.com, I can ping 192.168.2.1 and 192.168.2.18 and "home_ds".
K:> ping 192.168.2.1Pinging 192.168.2.1 with 32 bytes of data:
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Reply from 192.168.2.1: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.2.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 13ms, Maximum = 61ms, Average = 32ms
But when I try to telnet and ssh, all failed.
I tried:
telnet www.google.com 80
telnet 192.168.2.1 80
telnet 192.168.2.18 22
all failed.
I tied putty, msn, outlook,... all failed. But my wife's PC works normally at the same time.
In the network folder, there should be a list of all my network devices, including my wife's PC and my File server. But it's empty if this problem happens. However I can add them mannually and I can access the network drives.
And I can connect to my PC from my wife's PC with remote desktop.
If I logout and login again, the network will recover except 1 new problem. That is I can't access the network drives of my File Server with computer name "home_ds", but IP address works. And I can ping it with computer name.
K:>ping home_ds
Pinging home_ds [192.168.2.18] with 32 bytes of data:
Reply from 192.168.2.18: bytes=32 time<1ms TTL=64
Reply from 192.168.2.18: bytes=32 time<1ms TTL=64
Reply from 192.168.2.18: bytes=32 time<1ms TTL=64
Reply from 192.168.2.18: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.2.18:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 11ms, Maximum = 30ms, Average = 19ms
A restart will solve both the above 2 problems. But I don't want to restart my PC so frequently.
I tried to solve this problem by update windows and drivers but failed.
View 2 Replies
View Related
May 31, 2013
I decided to try a new network card due to problems with my onboard one, got a TP-Link TG-3269 after reading various reviews. most saying it installed in Win 7 with no problems or driver needed.Disabled onboard lan in bios, rebooted with new card in place, but card not recognised in device manager. Surprisingly, when I started windows troubleshooter it started working, it had reused my old onboard drivers even though it's in a PCI slot. but still not recognised in device manager.
View 5 Replies
View Related
Feb 27, 2013
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
View 5 Replies
View Related
Apr 13, 2014
Since a few weeks, I have a problem with my laptop running Windows 8.1 (Toshiba Satellite P50-A-12PBE). Sometimes, after bringing Windows back from sleep mode, I seem to have no connection to the internet. Windows says the connection is 'limited', wether I'm connected with a wire or wireless. Resetting the router doesn't solve anything, but rebooting my pc does. Since both the wired and wireless network are always simultaneously affected, I think this hasn't anything to do with drivers (I already have the latest versions by the way). I have made screenshots with ipconfig-results when I'm connected with a wire.
View 7 Replies
View Related
Apr 23, 2013
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
View 9 Replies
View Related
Oct 2, 2013
I upgraded to 8.1 and now my wireless connectivity is lost. I have installed the latest driver model for my device but still it is not working
View 9 Replies
View Related
Jul 29, 2013
Ability to do a persistent ad hoc network on windows 8 is playing a big role in a purchase decision of mine...
Setting up a persistent ad hoc wireless network with the release version of windows 8?
View 2 Replies
View Related
Jan 3, 2014
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
View 3 Replies
View Related
Sep 28, 2013
I have 2 PC's. Both are now running Windows 8. The main PC was running Windows 7 and I there mapped a network drive (z to the Windows 8 PC. It worked very nice. The second PC was also shown in "networks" in "my Computer" right after boot of Main PC. So network for sharing is set up properly on second PC.
After installing Windows 8 on main PC, it is still working, but the time spend waiting for the network drive is waaaaay longer now. The name of second PC "Photo-PC", is shown right after boot, but when I first click on the name, and get this error:
Networkpath not found. Errorcode 0x80070035
If I then wait about 20-30 seconds and then click again on "Photo-PC" then I have access to all shared drives, included my mapped network drive Z:
How can I eliminate this 20-30 seconds delay after boot?
I have given up setting up a homegroup, never had it to work, but "oldfashioned" network drives used to work
View 6 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Dec 21, 2013
I just bought my daughter a Lenovo running Windows 8 and when I try to connect to my Wi-Fi I am getting Limited connection only and can't figure it out.
View 5 Replies
View Related
Oct 3, 2013
I have up until a few days ago been able to modify and save my network properties ok. I connected a new DisplayLink USB docking station that lead to an update of some sort. I believed this to be to do with associated drivers. I let this go ahead and it may well have nothing to do with the problems I have been having.
First of all I couldn't even see the IP parameters and kept getting an error as follows:
"In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
The wired and wireless was working in environments where I could use DHCP so I was confident the hardware was ok. Uninstalling the drivers and then updating them has got me passed this problem so I can see and edit the IP parameters. However now they are never saved. I edit them, close the window, re-edit them and they are back to automatic settings! I need to use static settings in the office.
So far as I can see there are 2 possibilities:
1. I don't have permissions to save these settings, wherever they are stored. But I have administrator permissions. Where are the settings stored? I have saved them before. How can I get access to be able to save them again?
2. Something else is overwriting the settings. How do I find out what and stop it?
View 9 Replies
View Related
Mar 9, 2013
This is a fairly new install of Windows 8 pro (within the last month), and while trying to set up a static ip up today I found that I was unable to access the network properties or disable the connection in the Network Connections. I am pretty stumped as I am the only user of this computer and from what I can tell have the correct permissions to do so. When trying to check the properties it tells me "an unexpected error has occurred" with no further information.
View 9 Replies
View Related
Feb 27, 2014
I have just installed 8.1 on my laptop and now my wifi card wont connect to the network. My PC works on wifi just fine.
My laptop is a Lenovo G405 using a 802.11n Broadcom card.
View 9 Replies
View Related
Nov 5, 2013
I tried to update my driver for my wireless card (Intel Centrino Wireless N-2230). Basically, I've been getting a number of different errors and then the BSOD from the Bad Pool thing to others everytime I try to:
- update the driver (through network & sharing and also win update)
- uninstall the driver
- disable the wireless adapter
It will also randomly shut down and give me the BSoD every few hours without doing anything other than surfing on firefox. I've attached the logs as directed in the sticky
View 6 Replies
View Related
