Maintenance :: Restore Points All But One Have Disappeared
May 14, 2014
I have an HP laptop Pavilion g7 windows 8 Pro , that I have created restore points when I install things from time to time. But when I was shutting down the laptop, it must have ran into a problem, it wouldn't shut down, after installing a driver in optional updates from Ms,Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.2 - AMD Radeon HD 7520G
Installation date: 5/12/2014 12:26 AM
Installation status: Succeeded
Update type: Optional
I had to power it off. When I restarted I noticed some of my programs weren't starting properly. Well I looked for a restore point an only found one. Before I had at least 6 or 8. My question is where have they gone. Is there a place where windows stores them, and is there a way to recover them?
I've been running Windows 8 since 10/27 and just noticed there were no System Restore points. Doesn't Windows 8 automatically create them when a significant event occurs, like Windows Update?
I created one manually but would like to see Win 8 create them.
Prior to doing a system restore with a third party imaging program which was successful and saved the day, I noticed all the restore points were gone. They were there as I check each day/Why did they disappear as they never used to?
When I wanted to fix my Windows 8.1 because it wouldn't start, I saw ALL my restore points had disappeared. This has happened to me with all Windows operating systems I've had: Windows 7, 8, 8.1 and perhaps XP. When I need them most, they're gone, ALL OF THEM (not only those replaced for newer ones).
Last time this happened, Windows 8.1 eventually fixed my system by applying "attempting repairs" (however this fix is called, it's an option when 8.1 cannot boot).
But why do the restore points disappear in Windows 7, 8 and 8.1? Can I save at least one to a disk or something? Instead of creating a system image, which is heavy and slow?.
I am primarily a "slightly competent" linux user, I dislike UEFI, Win 8 and M$ (in that order, most of the time).
Ok, that's me .
New laptop, Windows 8 64bit pre-installed.
Is there any way to stop Win 8 automatically creating restore points, but still allow manual creation of points? Or at least "protect" important restore points.
I recently decided to restore a manual point to find Win 8 has deleted all of my points and replaced with "others". I realize I could increase the storage area, but I don't want that, as I'm always short of disc space.
I am running a cleanly installed standalone Windows 8 Pro X64 system which is not creating system restore points for updates, installations, and Revo Uninstaller uninstalls (despite the requisite setting being on in Revo).
I have being doing quite a bit of installation and updating over the past week or so but apart from one manually created restore point the only other was for an installation of Power DVD yesterday.
I've got the same problem as others are having regarding losing restore points. I have read extensively about possible fixes both in this forum and others but nothing works for me. The following is what I've done.
1. Partitioned one hard drive in 2 partitions. Did fresh install of Windows 7 and fresh install of Windows 8 on partitions. Installed Windows 7 first. Dual boot worked as expected. Originally left Windows 8 as default boot OS
2. When I went to make restore point on Windows 8 found that system restore was turned off on that drive. I turned on system restore only on the drive where Windows 8 resided, set amount ofsystem restore space to maximum, and successfully made a manual restore point.
3. Booted into Win7. Checked that system restore was turned on. It was and I had restore points present.
4. Booted back into Windows 8. System restore was turned off again and amount of restore space had been changed back to 0%.
I did the above steps several times with same result. System restore would work fine as long as I never booted into Windows 7 but once I did all restore points made in Windows 8 disappeared.
5. I then tried to apply the registry fix that was written back in the day of dual booting XP and Win7 where XP would delete Win7 restore points. (adding subkey of DosDevicesD:with value of 1 to hklmSystemMounted devices to Win7) This didn't work either. Windows 8 restore points still disappeared as soon as I booted into Win7.
6. In Win7 I checked VSS service & found it to be set to "manual" which I changed to "automatic" and started the service. Made another restore point successfully.
7. Booted back into Windows 8 and BOOM-restore point I'd made earlier was gone and amount of system restore space had changed to 0%
8. Thought the fact that having Windows 8 as default might cause problem so made Win 7 default OS. Went through all steps again but restore points still get deleted.
I read about the Bitlocker feature but I really don't know anything about it. Would enabling Bitlocker on Windows 8 solve this problem with Windows 7 deleting the restore points in Windows 8?
After refreshing my Windows 8 PC (I did not realise all the problems it would cause like loosing my email ,some apps and some programs) , I tried a system restore but I can't get any restore points before the refreshing time to reset the PC as it used to be.
I am running Windows v 8.1, would like to go back more than one restore point, and cannot do so.
When I click System/System Protection, click the [System Restore] button and choose the "Choose a different restore point" radio button, I am only offered a single restore point. I understand that some users also see a radio box reading "Show more restore points," but I have no such option. Is there a download available or some other way to see more than one restore point? I tried restoring in the hope that I could then see a prior restore point, but not such luck. The reason I need to do so is that I'm getting an annoying malware pop up in my browser and going back a restore point (or two) seems to be the only way I can find to make them stop displaying.
I have a .dll which I use to Show sort headings in all views (Win 8, File Explorer)?
I recently had to reset my Internet Explorer settings to remove Conduit Search hijacker. This stopped explorer7fixes.dll from working in File Explorer, because it was loaded into IE as an 'addon'. Now I cannot get it to work no matter how much I unregister and re-register the Explorer7Fixes.1.0.0.2 version of the .dll, and this is even after restarting explorer.exe/restarting/shutting down.
System Restore fixed this problem for me the last time it happened (I restored back to a time when explorer7fixes.dll was working), but it appears that won't work this time as my restore points are corrupted. Gives the error code (0x81000201)
I have the famous blue screen of death for the first time. I am using windows 8.1. Every time I try to boot into my rig, it says that:"windows has encountered some problems and need to restart". I am using another computer to write this message but most of all I have absolutely no clue how to resolve the issue. Restore Points were turned off in the rig to save space - Not my idea but it is what it is I have no back up - I am starting my rig and as soon as I get to the log in screen, the unit restart to a blue screen. I have a couple of options but most of them can't since I have no back up and no restore point.
When the rig restarts, I land on a blue page with 1 continue 2 troubleshoot 3 turn off your PC I choose 2 (because of tools). Then I have: 1 Refresh you PC: I need the refresh more than my PC 2 Reset your PC. It says if you want to remove all your files. Definitely not what I want to do. 3 Advanced options I choose 3 and then I get: 1 System Restore: No restore point so useless 2 System Image Recovery: No backup so useless 3 Start Up Repair: Tried that but no go 4 Command prompt: Tried that but I have no clue on how to move forward once on command prompt. 5 Start Up Behavior I picked that one and went option 1 to 4. 4 being the option that allowed to log into the unit in safe mode. Once I am in Safe Mode what should I be doing ?
I have used System Restore in Windows 7 to automatically create restore points, but not so in Windows 8 or 8.1. I configured TASKSCHD.MSC for a restore point to be created at 11 pm weekly, but not dice. I just changed the time to create a SR point daily at 7:15 AM to see if a SR point would be created. In Control Panel, there is not record of the SR point, but Task Scheduler says the 7:15 point was completed successfully. However, I can't find it in Control Panel.
I have a Lenovo G585 laptop that I installed with Linux (tried dual boot) and accidentally wiped out the Windows 8.1 restore partition. Now I want to restore it to Windows. I also have a Dell desktop Windows 8.1 that I can use to to create a USB restore image, can I use a restore image from a desktop to fix a laptop?
I can't find when I right-click on the start-button and select system. It doesn't even tell me what the score for my computer is. How do I get it back???
I know I can run it as a console command but I really prefer the "normal" version of it...
One week old installation. This morning when first booted This is how my native Windows app tiles looked like, third party tiles OK. Also the Quick Launch toolbar on desktop Taskbar was missing.
SFC / SCANNOW finds nothing.
I have restore points and system image, no problems there, but before restoring ...
i have windows 8 when trying to use system restore it gets to the screen that says system restore is restoring files, but that's as far as it gets, I let it run today for 4 hrs. what can i do?
I was able to do it in XP. I created a shortcut to system restore and put it on the Start Menu. So much easier than the way Windows 8 works. Wondering if there's a way to do the same in 8.1?
This is the message I get when I try and open system restore.
At the same time o0ther serious problems have arisen:
In control panel>programs and features all programs except those named Mi-Mo have disappeared. Some installed since are there, and those in the quick launch menu still work. Most are also missing from the start menu.
Al;so on start up I get a small window saying explorer.exe with a yellow exclamation mark and nothing else.
I want to use System Restore because every time I right click in file explorer or on my desktop, they crash (but I'm still able to run other programs normally). But when I try to start it, nothing happens. In the task manager, under background processes, it lists System Restore as many times as I've clicked on it! My anti-virus software isn't reacting to anything, though.
I really need to make a system image before I send my laptop in to get a hardware problem fixed, but I don't want to carry this over in the system image once the hardwares fixed...
I have never managed to get System Restore to work on Windows 8 or Windows 8.1 and always have to fall back to a backup.
I get a message indicating error code 0x80070005 and suggesting I turn off my anti-virus.
I have tried turning off my AV before running the restore but to no avail, and since the AV starts automatically I'm not quite sure how turning it off before the restore would work.
I recently tried a restore from the latest recovery point and got error code 0x80070006.
I installed 8.0 with the factory disk and for awhile the option to "refresh your pc" worked perfectly. However after the 8.1 update, I get a message stating to insert the 8.1 disk and it won't work with my regular 8.0 disk. I don't have an 8.1 disk. Is there a way to download an iso and use that to refresh the pc then use the original 8.0 key? I usually try to restore every 6 months because it's a habit I have had since 7. Usually my windows works fine but I run low on SSD space and it's easier to erase and restart everytime.
Reloaded my computer and downloaded apps...and 2 times I received a different redirect virus and the first thing it does is turn off the system restore and wipe out any restore points. Then, I am screwed...
I always uncheck all the extra stuff like toolbars apps like to get you to download. The last app that did this was the weather channel app.
My question is, how can I configure system restore to require a password to disable it which a virus may not look for? Or anything to keep system restore intact ?
It is too easy for these virus' to keep folks from restoring.
I ran a virus program to get rid of that "Visual Bee" and not only did it not get rid of it , I lost some of the tiles on the start up page. The one in the left corner that takes you to the desktop is gone. how to restore those tiles?
I have 2 hard drives in my computer, my main Windows 8 C:, and a win7/game/data drive, the second of which is failing. reports show it is failing a smart short test, and although it has been running fine for months, i figured i would replace it with my tax return.
My question: If i create a system image of C: and D:, would it be possible to just restore the D: portion of the image, or do I have to restore both, then delete the second C: on the new drive? i do not have the resources or courage to test this on my system now because I am not sure what this reformat, and with my luck, the drive would die during the restore.
