Maintenance :: System Restore Points Not Being Created (no Dual Boot)
Mar 24, 2013
I am running a cleanly installed standalone Windows 8 Pro X64 system which is not creating system restore points for updates, installations, and Revo Uninstaller uninstalls (despite the requisite setting being on in Revo).
I have being doing quite a bit of installation and updating over the past week or so but apart from one manually created restore point the only other was for an installation of Power DVD yesterday.
I have used System Restore in Windows 7 to automatically create restore points, but not so in Windows 8 or 8.1. I configured TASKSCHD.MSC for a restore point to be created at 11 pm weekly, but not dice. I just changed the time to create a SR point daily at 7:15 AM to see if a SR point would be created. In Control Panel, there is not record of the SR point, but Task Scheduler says the 7:15 point was completed successfully. However, I can't find it in Control Panel.
I've been running Windows 8 since 10/27 and just noticed there were no System Restore points. Doesn't Windows 8 automatically create them when a significant event occurs, like Windows Update?
I created one manually but would like to see Win 8 create them.
I have a .dll which I use to Show sort headings in all views (Win 8, File Explorer)?
I recently had to reset my Internet Explorer settings to remove Conduit Search hijacker. This stopped explorer7fixes.dll from working in File Explorer, because it was loaded into IE as an 'addon'. Now I cannot get it to work no matter how much I unregister and re-register the Explorer7Fixes.1.0.0.2 version of the .dll, and this is even after restarting explorer.exe/restarting/shutting down.
System Restore fixed this problem for me the last time it happened (I restored back to a time when explorer7fixes.dll was working), but it appears that won't work this time as my restore points are corrupted. Gives the error code (0x81000201)
I have an HP laptop Pavilion g7 windows 8 Pro , that I have created restore points when I install things from time to time. But when I was shutting down the laptop, it must have ran into a problem, it wouldn't shut down, after installing a driver in optional updates from Ms,Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.2 - AMD Radeon HD 7520G
Installation date: 5/12/2014 12:26 AM
Installation status: Succeeded
Update type: Optional
I had to power it off. When I restarted I noticed some of my programs weren't starting properly. Well I looked for a restore point an only found one. Before I had at least 6 or 8. My question is where have they gone. Is there a place where windows stores them, and is there a way to recover them?
Prior to doing a system restore with a third party imaging program which was successful and saved the day, I noticed all the restore points were gone. They were there as I check each day/Why did they disappear as they never used to?
When I wanted to fix my Windows 8.1 because it wouldn't start, I saw ALL my restore points had disappeared. This has happened to me with all Windows operating systems I've had: Windows 7, 8, 8.1 and perhaps XP. When I need them most, they're gone, ALL OF THEM (not only those replaced for newer ones).
Last time this happened, Windows 8.1 eventually fixed my system by applying "attempting repairs" (however this fix is called, it's an option when 8.1 cannot boot).
But why do the restore points disappear in Windows 7, 8 and 8.1? Can I save at least one to a disk or something? Instead of creating a system image, which is heavy and slow?.
I am primarily a "slightly competent" linux user, I dislike UEFI, Win 8 and M$ (in that order, most of the time).
Ok, that's me .
New laptop, Windows 8 64bit pre-installed.
Is there any way to stop Win 8 automatically creating restore points, but still allow manual creation of points? Or at least "protect" important restore points.
I recently decided to restore a manual point to find Win 8 has deleted all of my points and replaced with "others". I realize I could increase the storage area, but I don't want that, as I'm always short of disc space.
I have created two disk images. I deleted the first one but in the restore point pop up the title is still here (but is empty!!! The red one.) How can delete it????
I have read that two reasons could cause restore points not to be created automatically:
services. msc not enabled 2-task scheduler off.
I cannot find system restore or restore points in either place and am not sure what to do in either. How to enable restore paints to be created automatically?
I've got the same problem as others are having regarding losing restore points. I have read extensively about possible fixes both in this forum and others but nothing works for me. The following is what I've done.
1. Partitioned one hard drive in 2 partitions. Did fresh install of Windows 7 and fresh install of Windows 8 on partitions. Installed Windows 7 first. Dual boot worked as expected. Originally left Windows 8 as default boot OS
2. When I went to make restore point on Windows 8 found that system restore was turned off on that drive. I turned on system restore only on the drive where Windows 8 resided, set amount ofsystem restore space to maximum, and successfully made a manual restore point.
3. Booted into Win7. Checked that system restore was turned on. It was and I had restore points present.
4. Booted back into Windows 8. System restore was turned off again and amount of restore space had been changed back to 0%.
I did the above steps several times with same result. System restore would work fine as long as I never booted into Windows 7 but once I did all restore points made in Windows 8 disappeared.
5. I then tried to apply the registry fix that was written back in the day of dual booting XP and Win7 where XP would delete Win7 restore points. (adding subkey of DosDevicesD:with value of 1 to hklmSystemMounted devices to Win7) This didn't work either. Windows 8 restore points still disappeared as soon as I booted into Win7.
6. In Win7 I checked VSS service & found it to be set to "manual" which I changed to "automatic" and started the service. Made another restore point successfully.
7. Booted back into Windows 8 and BOOM-restore point I'd made earlier was gone and amount of system restore space had changed to 0%
8. Thought the fact that having Windows 8 as default might cause problem so made Win 7 default OS. Went through all steps again but restore points still get deleted.
I read about the Bitlocker feature but I really don't know anything about it. Would enabling Bitlocker on Windows 8 solve this problem with Windows 7 deleting the restore points in Windows 8?
Didn't plan ahead Dual boot Windows 7 and 8. I only initially allowed 100 GB for my primary Windows 8 on a 2 TB drive. I'm hardly using the W-7 and now find myself out of space on the W-8 (C) I'd like to repartition to give (C) 1 TB and 1 TB for (D)
So, previously I had Windows 8 and a system image of that drive. I want to dual-boot it with Win7, so I replace my Win8 with Win7, and reinstall Win8 on another partition. Can I restore my Win8 with the previous system image, or will it affect my Win7?
I am dual booting Windows 8 and win7. I actually have Windows 8 installed on its own hard drive and win 7 installed in its own hard drive. The win7 hard drive has been in use for the past 2 years and I have had Windows 8 running for about a week now. I purchased another hard drive for Windows 8 and left the old Win7 as it was.
I also have 3 other hard drives in the system. Everything is formatted NTFS.
So my system is as follows
Drive C - Boot Drive - I physically swap out the dedicated hard drive for Win 8 or Win 7 Drive D - internal 250 GB sata drive Drive F - internal 250 GB sata drive Drive H - internal 250 GB hard drive.
I have been running this config for about 2 years under Win7 with no problems.
The problem that I have now is when I swap the boot drive and boot up a different OS than last time (Like booting Windows 8, powering down system, swap boot drive, boot Win7) the system always says that there are problems on the 3 non-boot drives. It runs chkdsk(it least that is what it look like) and processes the 3 non boot disks one at a time which take about 10-12 minutes for all 3. Most of the time it finds no problems, but about 1 out of 5 boots will find a problem with one of the disks and then fixes it. The disks seem to be OK while I am running. I then power down and swap boot drive and reboot the other os and we start all over again. I am powering the system completely down for each reboot to make sure that the disk cache is flushed.So far the disk problems have been fixed by chkdsk at boot, but I am sure the day will come when the disk cannot be fixed and I will loose data.
which partition holds Windows 8 on my Dual Boot 7/8 system. I want to delete Windows 8 64 bit and reinstall Windows 8 32 bit, then update to Windows 8.1. I'm doing this because the system's old enough that 64 bit 8.1 won't install but maybe 32 bit will. I won't know unless I try.
I need to figure out which partition Windows 8 is on so I can format the drive and reinstall.
After refreshing my Windows 8 PC (I did not realise all the problems it would cause like loosing my email ,some apps and some programs) , I tried a system restore but I can't get any restore points before the refreshing time to reset the PC as it used to be.
I am running Windows v 8.1, would like to go back more than one restore point, and cannot do so.
When I click System/System Protection, click the [System Restore] button and choose the "Choose a different restore point" radio button, I am only offered a single restore point. I understand that some users also see a radio box reading "Show more restore points," but I have no such option. Is there a download available or some other way to see more than one restore point? I tried restoring in the hope that I could then see a prior restore point, but not such luck. The reason I need to do so is that I'm getting an annoying malware pop up in my browser and going back a restore point (or two) seems to be the only way I can find to make them stop displaying.
I am the same person who posted a thread about needing drivers for Windows 7 after dual booting it with my preinstalled copy of Windows 8. So, I was on Windows 7 today, and my screen randomly blinked on and off for 5 seconds, and then came up with a message saying my system display driver crashed but had recovered. Then, about a minute later, it crashed again and came up with a BSOD saying that the display driver had crashed but failed to recover. I do not have the error code from it, as I only saw this screen once, and forgot to copy down the codde because I got freaked out But anyways, I have copied the system report to this post from the Seven Forums System Tool. I am currently running in safe mode on my Windows 7.
I recently put together this computer from parts piece by piece. Unfortunately all these problems started on a particularly large upgrade including new motherboard, processor, heatsink, ram and gpu. So I'm not sure exactly what is causing this problem. Sometimes when I start up I get a BSOD, often a random cause, I've never seen any consistency. And that can cause up to 3-4 BSOD's in a row on boot up until eventually a system repair is attempted, which has to perform a system restore. After the system restore I get another one or two crashes before I am able to keep my computer on. Then a couple of days later, I might suffer the same bizarre chain again.
I have the famous blue screen of death for the first time. I am using windows 8.1. Every time I try to boot into my rig, it says that:"windows has encountered some problems and need to restart". I am using another computer to write this message but most of all I have absolutely no clue how to resolve the issue. Restore Points were turned off in the rig to save space - Not my idea but it is what it is I have no back up - I am starting my rig and as soon as I get to the log in screen, the unit restart to a blue screen. I have a couple of options but most of them can't since I have no back up and no restore point.
When the rig restarts, I land on a blue page with 1 continue 2 troubleshoot 3 turn off your PC I choose 2 (because of tools). Then I have: 1 Refresh you PC: I need the refresh more than my PC 2 Reset your PC. It says if you want to remove all your files. Definitely not what I want to do. 3 Advanced options I choose 3 and then I get: 1 System Restore: No restore point so useless 2 System Image Recovery: No backup so useless 3 Start Up Repair: Tried that but no go 4 Command prompt: Tried that but I have no clue on how to move forward once on command prompt. 5 Start Up Behavior I picked that one and went option 1 to 4. 4 being the option that allowed to log into the unit in safe mode. Once I am in Safe Mode what should I be doing ?
i have windows 8 when trying to use system restore it gets to the screen that says system restore is restoring files, but that's as far as it gets, I let it run today for 4 hrs. what can i do?
I was able to do it in XP. I created a shortcut to system restore and put it on the Start Menu. So much easier than the way Windows 8 works. Wondering if there's a way to do the same in 8.1?
This is the message I get when I try and open system restore.
At the same time o0ther serious problems have arisen:
In control panel>programs and features all programs except those named Mi-Mo have disappeared. Some installed since are there, and those in the quick launch menu still work. Most are also missing from the start menu.
Al;so on start up I get a small window saying explorer.exe with a yellow exclamation mark and nothing else.
I want to use System Restore because every time I right click in file explorer or on my desktop, they crash (but I'm still able to run other programs normally). But when I try to start it, nothing happens. In the task manager, under background processes, it lists System Restore as many times as I've clicked on it! My anti-virus software isn't reacting to anything, though.
I really need to make a system image before I send my laptop in to get a hardware problem fixed, but I don't want to carry this over in the system image once the hardwares fixed...
