Only been running this system for about a week. It says Optimization not available but it also says it ran on C: yesterday.
It didn't say this when I originally installed Windows and ran winsat formal. I just noticed last night that it was no longer available.
SATA controller is in RAID mode for my secondary drive, drivers for the AMD 990 chipset are up to date.
when I set up my windows 8, optimization was available for several days. Now the C drive says optimization not available. it still shows it as an SSD.
View 7 Replies View RelatedI was attempting to optimize Windows to work a bit better with my hardware, I go into CMD as Admin and enter sfc /scannow
It's actually run correctly on my other systems, but this time it had an error. The error said "Windows Resource Protection found corrupt files but was unable to fix some of them." and it gave me the logs to where it failed.
I am reading up about optimizing of SSD drives and I'm seeing that Windows 8 is supposed to be pretty good with automatically deciding whether to optimize or defragment drives based on what they are (SSD vs HDD). But I have a problem. I just bought an SSD but under the Optimization menu it is showing up as a Hard Drive.
It's a brand new Samsung 840 EVO 500GB and I'm going to be using it solely for music and movies as an external drive. I also bought an Anker external SATA III to USB 3.0 enclosure. I have the drive recognized and everything under the File Explorer but I'm just a little nervous that it's listed as a Hard Drive under the Optimization menu. How can I get Windows to see that it's in fact an SSD?
Having a problem with the Regular Maintenance waking the computer (Windows 8 on a Lenovo Q-190) to do its scheduled task as it's supposed to do. Here are the symptoms:
1. If I change the time for Scheduled Maintenance in the Action Center (Change Maintenance Settings), it WILL be reflected properly in the Properties of the Regular Maintenance Task in Task Scheduler.
2. However, if I check the box for "Allow scheduled maintenance to wake up my computer at the scheduled time" in the Action Center (Change Maintenance Settings), it WILL NOT reflect in the Properties of the Regular Maintenance Task in Task Schedular. Specially, I check the box to wake up my computer in the Action Center Maintenance Settings, but the corresponding checkmark is NOT reflected ("Wake the computer to run this task"), in the properties of the actual task in Task Scheduler.
3. I then put the checkmark directly in the Regular Maintenance Task itself ("Wake the computer to run this task"). However, at some point in the future, (not right away; I close and then reopen the task to make sure that it 'sticks'), the checkmark "disappears. Then, the task does not run at night while the computer is asleep, but runs in the morning when I wake the computer for regular use. At that point, the checkmark in the task is gone.
I deleted maintenance tasks in task scheduler (Microsoft>windows>task scheduler) because I didn't want to have automatic maintenance fire up when I'm working, but sadly... some shit got messed up. My computer starts using hdd at 100% if left idle, and then freezes and all kinds of weird crap that I'm almost positive have to do with me deleting maintenance.
which tasks do I need to re-create in task scheduler in order to have auto-maintenance once again. If you could just read to me all the tasks, triggers, and which programs they are running .
I had the idle & regular maintenance tasks disabled but they always re-enabled themselves. In a fit of madness I ended up deleting them but now when I open a folder with videos or images the thumbnails always display in a slow staggered way every time from left to right, If I then exit the folder & go back in they do the same again. It's almost like they are not being cached at all & are having to be redrawn every time.
The only change I have made to my system is remove Comodo firewall & install Private Firewall & delete the idle & regular maintenance tasks.
I have Automatic Scheduled Maintenance set to run at 3:00AM. I get to this setting by going to Control Panel > Action Center > Maintenance > Change maintenance settings. I also have the box for "Allow scheduled maintenance to wake up my computer" checked.
However, I note that if I put my computer to sleep for a few days, when I wake it back up, Automatic Scheduled Maintenance has NOT run. I can tell this because my antivirus definitions are out-of-date and haven't been updated since I put the computer to sleep.
how to figure why it's not waking up for Scheduled Maintenance? Is it possibly a BIOS setting? Do I have to manually add it to Task Scheduler? I'm running Windows 8.1 Update 1, ASRock Z87E-ITX mobo, Intel i7-4770S CPU, Samsung 840 EVO mSATA SSD, 16GB RAM.
I found out how to add a task to the Automatic Maintenance that runs each morning. I use Geekzone's EPG collector to fill in the guide on Media Centre and I though it would be nice for it to run as part of Automatic Maintenance rather than wake the computer up again later to do it's thing.
Here's how:
Create an XML files in notepad and paste this in...
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-02-01T19:34:03.9529687</Date>
<Author>johnofe-laptopJohnOfE</Author>
<Description>EPG Loader</Description>
[Code] ....
Save the file then in Task Scheduler, import the XML and it will appear. Edit it from there further if you want.
I got this from exporting a task that runs as part of Automatic Maintenance and edited it to suit.
the thing is, I still don't know how it works! I haven't been able to create a schedules task from scratch that runs as part of Automatic Maintenance.
Other than plagiarising existing tasks to get what I want, how it's really done?
I have what I want, and it works great being able to run all the things I want all at the same time at 3AM each day, as part of Windows' ritual. Even better, if I disable it from waking the computer, everything runs when I'm logged in and Idle. It's fantastic.
I'm using Intel Rapid Start function, so my PC is starting from completely off to fully desktop in less than 10 seconds (no POST, no Boot ). But I must each time remember to stop "automatic maintenance", because if it is running when closing with IRS, then it won't start again. I can find the setting to change the time of running "automatic maintenance", but I want to deactivate it for ever!! I will maintaine my PC myself.
View 9 Replies View RelatedI noticed that automatic maintenance in Win 8 cannot be disabled. I maintain my pc regularly and do not need it. Is there a way to do it or should I let it run?
View 9 Replies View RelatedI have set up scheduled maintenance on my laptop (on Windows 8.1) as:
I have also set up my laptop to go to sleep after an hour of inactivity:
So far, I have found my laptop not asleep everytime I wake up at around 7AM (two times in a row). Here are some "powercfg" outputs:
What should I do?
I'm playing watch dogs which needs 6GB ram on a 4GB ram PC.
I run compact tray meter and one thing I notice is that the ram usage never goes more than 80%. In fact, whenever it loads stuff from the HDD ( I could see HDD usage 100% and stuttering in my game), RAM usage decrease to 77-78%. VRAM is kind of healthy at only 52% of 2GB used.
I want to know why not all 100% of my RAM is used? Hardware reserve is only 145MB.
And why is the minimum system requirements for watch dogs a GTX460? I mean, I got a 645M, I can play it, my friends with a 640 and 630m can play it fine, our GPU temperature is just 80"C even after hours of playing.
I am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 Replies View RelatedMy five year old HP Pavilion crashed with virtually no signs of life, although the 2 320GB drives are only 8 months old, and are spinning when startup is attempted. No messages of any kind on the display; I checked the display and it is good. Bought a new HP, but it has Windows 8.
All my backup data is via Norton Ghost 15/Windows 7 and is intact on a 1 TB external Passport drive. I need to figure out how to retrieve this data.
A suggestion was made to just install the old Win 7 hard drive in place of the Win 8 hard drive in the new computer. New computer can't accommodate both old Win 7 hard drives, so I stuck the C: in, it per normal containing the startup and OS files. The computer would not boot from this drive, and delivered an error message to the effect "No bootable disk or drive has failed."
So the question is would there be anything in the BIOS of the new PC which would make it expect to see Win 8?? why it wouldn't boot from this drive? I realize the drive could be bad, but given the age of the drive, it seems unlikely...
Friend on 100% CPU system to a stand. Resulting in a sharp decrease in system speed.
View 9 Replies View RelatedIt's scheduled for 3AM, but the computer is powered down then. Does it run the next time it's powered up and idle?
View 2 Replies View RelatedI have Intel I7-3930K running at 3.9GHz and I've noticed that my CPU utilization never goes over 50%, even when rendering, or playing cpu demanding games like BF4. It's also causing huge hiccups(CPU spikes) every 2 minutes or so, while playing games. I've installed all windows updates and latest drivers, disabled all unnecessary programs and tasks.
View 7 Replies View RelatedI can't run WEI in Windows 8. I've tried to install Media N pack but unfortunately its fail to install!
View 9 Replies View RelatedSo the problem is whenever I open Task Manager i check the performance section i see that RAM shows that 2.2 GB available.
View 6 Replies View RelatedI hate when things don't work when and how I'm expected them to. Anyway, I have Windows 8 Pro N and I want it to shut down instead of hibernate. I made a shortcut:
"C:WindowsSystem32shutdown.exe -t 00 -s" and whenever I press it, it reads "shutting down" on a blue screen, after that it turns off. So far so good. But when I press the power button it reads "resuming from hibernation".
Lately I've been having these annoying popups telling me I'm running out of memory, but I really don't understand it. I have 32GB of RAM and I'm currently using a little less than 8GB of it.
The popups don't indicate that I'm running out of virtual memory (paging file), but I do get system events saying e.g. Windows successfully diagnosed a low virtual memory condition. The following programs consumed the most virtual memory: Watch_Dogs_3dm.exe (8104) consumed 3199815680 bytes, uTorrent.exe (4380) consumed 237621248 bytes, and explorer.exe (3992) consumed 148795392 bytes.
My pagefile is managed automatically and is about 4GB in size currently. With so much spare RAM, I really don't get why Windows is using my slow disk (3 disk stripe, not that slow, but still). I put in enough so I can run games without closing my virtual machines, browsers, etc. I barely ever use over 24GB so I still have plenty room for the occasional spike.
I know I can manually set my pagefile to 64GB if need be, but I bought RAM to be used. My disks should only be used for storage, not for paging.
So I tried to open defrag today for the first time with using Windows 8 and when I click on the application the command prompt opens and closes in about two seconds and then nothing happens.
View 7 Replies View RelatedI am the administrator and only user of the pc. It is a surface pro 3. What do I do?
View 4 Replies View RelatedEaseusToDo backup gives me the following error. I use security tab to allow access to everyone and still get this error. Can I run the backup in the built in admin account? I have tried system backup and Disk and Partition backup and get the same error message. This is an hd in an enclosure with a sata connection.
View 9 Replies View RelatedIs it normal to have the disk at 100% on start up? The only program that are even using any of my disk on start up is system and svchost.
View 3 Replies View RelatedI have got myself a new laptop recently with the following specs
It's a HP Pavilion G6 2253SA
Intel Core i5 3210M
Intel HD 4000 Graphics up to 1.6GB shared graphic memory
6GB RAM DDR3 at 1600MHz
1TB HDD 5400RPM
Intel HM76 Chipset
Anyway I have a 64 bit copy of Windows 8 Pro installed and this has been re-installed as I did not want to bother with all the Manufacture software that was not necessary for my system
This next part sounds silly and fussy
Anyway even after reinstallation my ram still does not go up to 6GB as it only peaks at 5.89GB and that 103MB is reserved for hardware
I plan on upgrading it to 8GB of ram however I do not want to upgrade it if all the extra memory is just going to be reserved for hardware
The picture below is a picture of my computers information WHILE rendering a 3D-text object. I will diagnose what each picture seperately with what i want in a brief description in it. What i am also trying to do is render videos but it is wanting take over 24 Hours to rendering a 15 second clip.
(CLICK IMAGE TWICE TO ENLARGE)
The bottom photo is a picture of all my specs and what I am running (Windows 8, 64-bit, 8GB Ram, 2.50GHz, ect, ect. My laptop model is a ASUS R500A with Windows 8 pre-installed, clean. This laptop is a month old and only use it for media).
The picture on the left is a photo of my Task manager while its rendering the video. I can see the CPU is going above its limit even though I have not made any modification to my systems settings but the RAM is not being completely used? It also says 5.1GB Available, 3.0/9.1GB commited? (Even though i only have 8GB), and the Page Pool is low as hell when it should be higher? (If im correct)
The picture on the right is a picture of my virtual memory. I have 8GB of ram but the currently located is 1216MB when it recommends 4.5GB? I was thinking about maybe putting this to 4.5GB but im not sure what to set the Initial Size and the Maximum Size values too.
So basically I want to have my computer modified for rendering at the fastest speed possible. I have also gone into the settings and made sure the limited ram thing is off and it was already off.
UPDATE; I figured if my power options are set to power saving it uses less CPU but when i set it to max it uses all the CPU. This does not fix the RAM problem though.
How do I get my computer to Hibernate. The power options only allow for shut down, reboot, and sleep... I know there is a way
View 4 Replies View Relatedyesterday i tried to install a free copy of camtasia 8 the video showed a way so i can register the program free the way suggested was to go to c:/windows/system32/drivers/ect/ then try to change the security properties of the host file and add a states called everyone but isn't work for me so i canceled it, then i get a free user name and serial number from friend and register the program and working properly. I restart may computer lately and its not working , its keep restating i tried refreshing the system but its said my c partition is locked i tried restoring it using troubleshooter but it's not restoring it and tell that no restore point when try to make a one the system response is "system protection is available only in online operating system. auto recovery not working too .
View 4 Replies View RelatedI suspect that my CPU core parking plays a part in my PC's performance especially when I'm running games. I was wondering about the best way yo go about Unparking them. Should I try to do it in the bios or through the registry somehow? I tried using a piece of software that supposedly unparked the cores in my CPU but it turns out, that it really didn't do anything at all.
View 9 Replies View Related