I was attempting to optimize Windows to work a bit better with my hardware, I go into CMD as Admin and enter sfc /scannow
It's actually run correctly on my other systems, but this time it had an error. The error said "Windows Resource Protection found corrupt files but was unable to fix some of them." and it gave me the logs to where it failed.
Only been running this system for about a week. It says Optimization not available but it also says it ran on C: yesterday.
It didn't say this when I originally installed Windows and ran winsat formal. I just noticed last night that it was no longer available.
SATA controller is in RAID mode for my secondary drive, drivers for the AMD 990 chipset are up to date.
when I set up my windows 8, optimization was available for several days. Now the C drive says optimization not available. it still shows it as an SSD.
View 7 Replies View RelatedI am trying to use Windows Backup in Windows 8 on my HP Envy h8-1414 to my external HD and I get a message saying something like, "Your last backup did not complete." The reason given is The Device is Not Ready or something like that. The error code is 0x80070015. Yet from the Desktop/Computer I can read and write to the external disk with no difficulty.
I don't want to go much further with the set up until until I can make a good backup.
I am reading up about optimizing of SSD drives and I'm seeing that Windows 8 is supposed to be pretty good with automatically deciding whether to optimize or defragment drives based on what they are (SSD vs HDD). But I have a problem. I just bought an SSD but under the Optimization menu it is showing up as a Hard Drive.
It's a brand new Samsung 840 EVO 500GB and I'm going to be using it solely for music and movies as an external drive. I also bought an Anker external SATA III to USB 3.0 enclosure. I have the drive recognized and everything under the File Explorer but I'm just a little nervous that it's listed as a Hard Drive under the Optimization menu. How can I get Windows to see that it's in fact an SSD?
I do a shutdown from the Windows Logon screen which I believe is a full power off rather than a hybrid shutdown:
(The process C:WINDOWSsystem32winlogon.exe (XXXXX) has initiated the power off of computer XXXX on behalf of user NT AUTHORITYSYSTEM for the following reason: No title for this reason could be found
Reason Code: 0x500ff Shut-down Type: power off)
However when I restart the computer it then goes into a black screen with a pointer and never completes reboot.
The only way to fix this is to reboot again which I am guessing is using the "Hybrid Boot" profile:
"The last shutdown's success status was false. The last boot's success status was true."
This did not occur in Windows 8.
How to diagnose the shutdown culprit?
while i was editing a video using cyberlink powerdirector 10 windows 8 got hanged then a black screen a appeared which said YOUR PC RAN INTO A PROBLEM and it collects some info and says search the internet for "video_tdr_failure" otherwise it is running perfect.
Also i installed NFS Most Wanted 2012 and it gets stuck while i am playing I run it with windows 7 compatibility and it runs fine what is wrong with my graphic card
I have a Nvidia GeForce 210
"Failure configuring Windows features. Reverting changes. Do not turn off your computer."
Stuck on this loading screen and I can't get out! What do I do?!
I have a HP laptop pavilion g6 i believe its running on window 8.1
The system is slow to warm up..I recently uninstalled my avg security due to it not updating and this error listed above occured a week later. I apparently have a full internet connection but nothing happens when i try to connect to google chrome. Links from my start menu appear to be working if i want to check my email or facebook but not if i just want to surf the web. This is all i use my laptop for.
I followed the directions at [URL] .....
After I launch Windows8.1-KB2919355-x64.msu the updater fails to install it.
I have been running my desktop system under WIndows 8.1 since release, and I started having a problem the other day.
The system seems to have hung up completely, so I powered it down (it is usually up 24 x 7 since I use it as a DVR along with my computer usage).
It seemed to be ok when it powered up, but then a bit later it asked to reboot to finish installing updates.
It has not booted since.
During reboot, it displays the Windows logo and the spinning dots for a few seconds, and then the screen blanks, and my monitor loses signal. I have left it for quite a while and it doesn't come back. After some time, it goes into sleep mode (slowly flashing power indicator), so something is going on at some level. I have powered off and back on, and removed the power cord for a minute to see if anything different happened... it doesn't.
I have tried pressing F8 and Shift-F8 during reboots to try to get to safe mode, but so far no good. Last night, I used my laptop and seem to be able to access shares, but unfortunately it appears that the things I want/need most are not shared.
The bad part is that I haven't been able to locate my recovery disc, but I will continue to look.
I bought the system with Windows 7 right before 8.0 was released, and When 8.0 came out, I got the cheap upgrade and before loading it, installed an SSD for my C: Drive, and kept the existing HDD for my D: Everything has been running well until this incident.
My HDD died on me last week so replaced it with a new one, reinstall windows 8, upgraded to windows 8.1 with out any problem, but for the past 2 days I've been having this POWER_STATE_FAILURE thing
View 4 Replies View RelatedI am new to Windows 8 with a new Asus X550E series computer. When I try to do an update to 8.1 it says and I quote "Failure configuring Windows updates Reverting changes Do not turn off you computer."
View 1 Replies View RelatedI've tried to upgrade from windows 8 to windows 8.1, but it didn't work. all the steps of downloading and installing through Windows store went well, until the computer restarted and was configuring things then a blue screen appeared showing that the computer ran into a problem, then the procedure to go back to windows 8 started. I'm now working with windows 8. My computer came with windows 8.
View 9 Replies View RelatedI have just successfully installed Windows 8 (upgrade from windows xp).
Although I recall selecting the option for clean install the set up progressed on an upgrade basis. I must assume that I failed to accurately select the clean install option.
The Windows 8 upgrade to my five year old PC was successful. However, I was disappointed not to have done a clean install and wanted to remove unnecessary files including the Windows.old folder.
I decided to try out Windows 8 reset option in order to reinstall on a clean basis. After some hours it reached 98% and declared it was unable to complete. It offered to restart - not surprisingly message "no operating system on drive".
I wondered if I could load the Windows 8 pro upgrade DVD back in but was not sure that would work as windows Reset had reformatted my drive?
Fortunately, I created a rescue disk with Macrium Reflect immediately after my successful windows 8 upgrade so this got me back to a position just prior to selecting Reset.
Everything seems to be working fine but I am wondering how robust the Reset function is in Windows 8 and why it failed. Do I have some unknown hardware problem. I did wonder about running Chkdsk but I gather this is automatic at startup in windows 8. There are no messages to indicate anything wrong. Is there anything I should check?
My intention was to get familiar with windows 8 and then immediately upgrade to 8.1. Will I get an option to do clean install when doing an upgrade from windows 8 to 8.1? If I do a clean install of 8.1 is it probable I will get same problem as in Reset or is that an entirely different process?
Details:Dell Vostro 1710 (5yrsold) was running windows XP now upgraded to windows 8 pro
Can my Windows Pro license (non OEM) be transferred to my rebuilt computer that now has a different model motherboard and CPU? I tried booting up the newly rebuilt system with my system hard drive (two SSD's in RAID 0) as is but failed. It looks like I must do a clean install and then try to restore everything from my last backup.
View 2 Replies View RelatedMy windows 8 ultra books has been showing failure configuring window features for nearly hours and I can't swipe or do anything with it, this happened after the window updates happened, I don't know what do any more, I switched it off and then turned it on, but it's still ones back failure configuring window feature reverting changes.
View 1 Replies View Relatedmy system was restarting/updating then my brother plug his cellphone charger accidentally turning off my PC, my question is will it affect my system? haven't notice anything unusual yet
View 7 Replies View RelatedWINDOWS 8 PRO. I am trying to do normal updates and I can download them. When i do the restart I get FAILIURe TO CONFIGURe UPDATES. I believe i deleted something but nothing in trash. SYSTEM RESTORE IS my friend but i can't go back pass the 10th of this month...different problem.
View 9 Replies View RelatedI recently upgraded to 8.1 (mistake) and have been having issues with my harddrive. Just today, I restarted my computer only to get a "windows failed to start" message. I went into the recovery options, and attemped a system restore (didnt work), system refresh (recovery media wasn't present), and CMD commands (chkdsk) and even sfc /scannow which I can't seem to get to run, I always get the "Will start on next boot" message, which it never does. So I attempted using an ISO with the windows 8.1 professional. Tried everything I did above, and still nothing. Refresh fails with the CD, and when i try to install a new partition, it only gives me the option of upgrading (which i cant) or reinstalling everything deleting anything in the process. I don't understand why I can't install on a new partition like I did with Windows 7.
View 5 Replies View RelatedMy system started pausing/freezing, log files showing some errors about not finding some *.dll files. The system will still boot; I enabled the administrator account, but have lost the original user profile. All the docs/files are still there in the usual c:usersusername... directories. Installed Seagate's SEATOOLS app and it reported a failure, not completing the process. I used the recovery app from Acer and created a bootable recovery device (Seagate expansion portable drive) and a CD of drivers and apps. I am told this system has a small SSD, but it is hidden because it is for the OS, Windows 8.
I've put an identical replacement drive in; I changed bios to boot from the external USB device and it comes up in what appears to be recovery mode. I select option to completely refresh system, but it then comes up with "drive where windows is installed is locked". I select the reset option, it asks whether I want to re-partition. If I select yes, it returns 'unable to reset pc system drive cannot be found'. If I select no to repartition, it returns 'unable to reset. A required drive partition is missing.'
Using the recovery app, I can get to command prompt; it comes up as windows ver 6.2.9200, x:windowssystem32, The c: dir<enter> command returns efi (D), bootmgr, boot (D), bootmgr.efs and sources (D). I insert another usb stick and those files show up correctly.
Also, a byproduct of installing drive it indicates it can't find a battery now!
Why the reset or recovery options are not able to see the replacement drive? Since I used a Seagate expansion portable drive rather than a 16gb USB drive, is that the problem? I believe Windows 8 won't allow the use of a DVD for the recovery process (size issue?).
Could I consider doing a reformat and clean install of Win7 pro? Will I need to change the boot bios setting from UEFI to legacy? Would I still be able to reinstall Windows 8 at some point in the future if necessary, or should I try to work with the Windows 8 configuration?
I have windows 8 installed on c drive and Linux mint installed on separate hard disk. Everything was working fine before I installed kubuntu from Linux mint. After installation I couldn't get into windows 8 because it was giving error message 0*c000000f. I tried to refresh Windows but no avail because windows has locked that drive and I couldn't access it. Than I decided to backup important files from windows 8 hard disk from Linux. I accessed windows 8 drive but three folders were missing "Windows" , "Users" and "Program Files(64)" other than that I can access all files and problem is all important data is in user folder.
Than I installed windows 8 on different partition still same thing cant access those three folders. Is there any possible way to simply access user folder?
I am experiencing a severe problem with my laptop, a pretty new ASUS S550CB. It started two weeks ago and I really cannot figure out what is the cause. The problem is that the laptop is no longer unable to wake up from sleep or hybernation modes. If it goes to sleep, after it wakes up it is able to show the login screen (sometimes) but when you're typing the password it freezes and after a while, a blue screen saying that the computer stopped working due to a Driver Power State Failure is shown. A minidump is saved and the computer is restarted. The whole operation takes a looong time. I also notice that boot times are much longer even when waking up from power off state.
From an initial investigation, the problem seemed to sit in iaStorA.sys (Intel Rapid Start Technology driver) not handing power modes correctly. So I tried to upgrade it to the latest version, and no luck. I tried to uninstall it, and uninstall also the ExpressCache software that the laptop came with, but no luck.
I then installed again first IRST latest driver, no luck. I then added ExpressCache on top of it (as stated in ExpressCache install instructions), no luck.
I do not have a recovery point saved before the problem started to happen (aroud 18 feb). I have tried to uninstall all windows updates received from 15 feb onwards but guess what? No luck as well.
The laptop all of a sudden became almost unusable, sleep and hybernation no longer work at all, and the SDD and IRST were a main driver in my choice of buying ASUS S550CB.
I attach to this post the outcome of SF Diagnostic Tool run today.
i just got a new MSI Laptop and i downloaded some games from steam and you know that kind of stuff. Then i had to download windows 8.1 (not from disc) and then it started downloading normally and then all of a sudden this "Failure configuring windows features Reverting changes" popped up and then i just waited and waited, i waited for about a few hours then i gave up and decided turning it restarting it but it came back and again and again i could go to the password the sign would just pop back up i tried pressing f8 and f9.
View 1 Replies View RelatedI tried to update the latest windows 8.1. I got the installation package but when it started saying looking for updates on this computer it said that it was not applicatable on this computer.
View 7 Replies View RelatedI have problem with Windows Update and i see that i am not only there. My problem is, after install updates and restart system, i get message after some time "Failure Configuring Windows Updates. Reverting Changes ..."
My Windows is Windows 8 RTM and i tried install updates manual but nothing change.
I attach screesnshot where is problem in updates ...
1234.jpg12345.jpg123456.jpg1234567.jpg12345667.jpg
I have an Asus VivoTab Smart that comes with Windows 8, and before I can do the 8.1 upgrade, I have to install all 112 updates. This was going just fine until after it rebooted, and now it's been stuck on the "Failure configuring Windows updates, Reverting changes" screen for about the past 12+ hours. I restarted it a couple of times by holding down the power button, but it comes right back to the same screen after the Asus splash screen. Were this a laptop, I know exactly how to fix it (go to Advanced Recovery Options), but since it's a new tablet that I haven't yet connected its Bluetooth keyboard to, I'm basically stuck. I can't even boot to a flash drive because that requires a keyboard to get to the boot options.I don't have a keyboard attached to it and because the OS isn't loaded (can't get the Charms bar so I can restart it that way or boot into Safe Mode or anything.)
View 1 Replies View RelatedMy PC just BSOD while playing games but this was only after it crashed to black screen unresponsiveness. A couple hours after the first crash (maybe after 1.5 hrs of gaming once again) it BSOD with the "Kernel Security Check Failure" error.
SF diagnostic included below:
Every time I wake up my Lenovo U310 Touch from Sleep it freezes and then blue screen error :
DRIVER_POWER_STATE_FAILURE.
I have attached my files from SF diagnostic tool.
I Get This BSOD Everyday. Is It Because of The Old Firmware of My SSD?
View 5 Replies View RelatedMy laptop is 2 days old and I went to do a windows update which I had to do and just says 'failure configuring windows features. reverting changes, don't not turn off computer' this also is happening with my other laptop I think it's a bit of a joke that it doesn't work on a brand new laptop..
View 2 Replies View Related