Updates :: Failure Configuring Windows Update?

Sep 15, 2014

I am new to Windows 8 with a new Asus X550E series computer. When I try to do an update to 8.1 it says and I quote "Failure configuring Windows updates Reverting changes Do not turn off you computer."

View 1 Replies


ADVERTISEMENT

Updates :: Restart After Installing GTalk - Failure Configuring Windows Updates / Reverting Changes

Jun 10, 2014

I purchased a new ASUS LAPTOP which came with windows 8 installed. When i tried to restart after installing Gtalk i got this message.

"Failure configuring windows updates. reverting changes. do not turn off your computer ".

I got this on last friday i.e the 6th of june, ever since i am not able to do anything with my laptop. I don't have windows 8 dvd as well. How do I reboot it?

Model number : Asus 15634 Laptop Intel Core i3 .

I also tried pressing the power button for 15 secs , still no luck. Tried f8 f9 and windows + r and windows+ X keys no luck.

View 9 Replies View Related

Updates :: Failure Configuring Windows Updates From Clean Install

May 24, 2014

After a BSOD and utter failure to boot (presumably a critical OS file damaged) I ran the recovery tools for a total factory reset.

Connected to the internet and worked for an hour or two, then tried a reboot. Windows update had 104 updates to process. It did them, then "Failure configuring Windows updates. Reverting changes. Do not turn off your computer"

This should take half an hour. After 90 minutes it has rebooted 5 or 6 times. It keeps reverting to the same "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" message. Looks like it might want to reboot through each of those 104 updates.

I'm going to repeat the factory reset and the FIRST thing I will do is disable updates. I'm going to see how long I can work without any updates.

View 1 Replies View Related

Updates :: Failure Configuring Windows Updates - Reverting Changes

Sep 15, 2014

I am currently having an issue on my laptop at the moment where it's stuck in an infinite loop of 'reverting changes' after having tried to update and failed at 30%, I have done some reading at ways to boot into safe mode however it would appear windows 8 doesn't give me the chance.

I do not have a copy of my original windows 8 disc and am at a loss!

I have tried spamming F4, F8, F10 buttons and none are allowing me to enter boot mode.

View 3 Replies View Related

Updates :: Failure Configuring Windows Updates Reverting Changes

Jun 21, 2014

I just bought new Asus Vivotab Smart Windows 8 tablet, after the very first windows update it failed to install some of the updates, and then after the reboot I am now stuck with the message "Failure configuring Windows updates, reverting changes".

It never gets any further than this, it never reverts, I have left it running for an entire day and have restarted several times.

This is a tablet, so there is no keyboard so I cannot press any F keys to get into recovery mode, and no CD to boot from etc.

View 2 Replies View Related

Updates :: Failure Configuring Updates - Windows 8 (not Pro)

Nov 22, 2012

I have installed the updates for the above, both with automatic updates on and off.

It gets to 15% then fails

How do i get them to configure

View 9 Replies View Related

Updates :: Windows 8 Saying Failure Configuring Features

Jul 30, 2014

My windows 8 ultra books has been showing failure configuring window features for nearly hours and I can't swipe or do anything with it, this happened after the window updates happened, I don't know what do any more, I switched it off and then turned it on, but it's still ones back failure configuring window feature reverting changes.

View 1 Replies View Related

Failure Configuring Windows Updates Message On Restart

Oct 30, 2012

I have problem with Windows Update and i see that i am not only there. My problem is, after install updates and restart system, i get message after some time "Failure Configuring Windows Updates. Reverting Changes ..."

My Windows is Windows 8 RTM and i tried install updates manual but nothing change.

I attach screesnshot where is problem in updates ...

1234.jpg12345.jpg123456.jpg1234567.jpg12345667.jpg

View 9 Replies View Related

Stuck On (Failure Configuring Updates)

Aug 27, 2014

I attempted to update from windows 8 to windows 8.1, and it said that I need to finish all my other updates first.So I did that, and I left for a while (an hour or 2) and it was STILL UPDATING. I got intimate and shut the computer down using the power button and turned it back on only to be met by a screen that said "Failure configuring updates, reverting changes." I waited longer then before and it was just stuck there! I guess you can consider it frozen, but I can still change the brightness and the volume and the circle thing is still spinning. I can't access anything, no start menu no nothing, So my laptop is useless.

I've read online that I was supposed to wait longer, and that I should have done all the updates at once. But what has been done cant be undone, and now I need to get past this update screen. How do I undo the updates? I've tried safe mode and restoring it but it just takes me back to where I was before. If you need my model number or whatever, then tell me. I have an HP Laptop with Windows 8.

View 4 Replies View Related

Tablets :: Windows 8 Tablet Stuck On Failure Configuring Updates?

May 29, 2014

I have an Asus VivoTab Smart that comes with Windows 8, and before I can do the 8.1 upgrade, I have to install all 112 updates. This was going just fine until after it rebooted, and now it's been stuck on the "Failure configuring Windows updates, Reverting changes" screen for about the past 12+ hours. I restarted it a couple of times by holding down the power button, but it comes right back to the same screen after the Asus splash screen. Were this a laptop, I know exactly how to fix it (go to Advanced Recovery Options), but since it's a new tablet that I haven't yet connected its Bluetooth keyboard to, I'm basically stuck. I can't even boot to a flash drive because that requires a keyboard to get to the boot options.I don't have a keyboard attached to it and because the OS isn't loaded (can't get the Charms bar so I can restart it that way or boot into Safe Mode or anything.)

View 1 Replies View Related

Update Fault - Failure Configuring Windows Features / Reverting Changes

Sep 16, 2014

My laptop is 2 days old and I went to do a windows update which I had to do and just says 'failure configuring windows features. reverting changes, don't not turn off computer' this also is happening with my other laptop I think it's a bit of a joke that it doesn't work on a brand new laptop..

View 2 Replies View Related

HP Laptop / Windows 8 - Failure Configuring Windows Updates

Sep 29, 2014

I recently finished reimaging my HP Laptop with the factory Windows 8 image found on the HP recovery discs.

What happened is i wanted to update the computer to Windows 8.1 so opened Windows Update and installed all 111 updates relating to Net Framework 3.5 and Windows 8 System/Security.

When i restart the computer after a while of "Configuring Updates" it changes "Failure to Configure Windows Updates, Reverting Changes. Do not turn off your computer" and continues even though the computer self restarts multiple times.

Ive tried reinstalling the OS using the recovery partition and trying Windows Update again but it still has the same problem.

View 3 Replies View Related

Updates :: Windows 8.1 Update (KB2919355) Failure

May 23, 2014

I followed the directions at [URL] .....

After I launch Windows8.1-KB2919355-x64.msu the updater fails to install it.

View 2 Replies View Related

Updates :: Refresh Using Windows Advanced Startup Settings - Failure To Configure Update

Jul 28, 2014

My Dell Inspiron 3520 was going quite slow for unknown reasons so I decided to 'refresh' it using Windows advanced start-up setting. Since that time I have been unable to install Windows updates. Well, I can 'install' them, but they won't 'configure'. Once installed and 'configured' 100% I get this error message advising following reboot : "Failure to configure updates. Reverting changes". The laptop then stays paralysed on that screen.

This only started to happen AFTER I "refreshed" my laptop, which was running Windows 8.1 pretty-much problem-free, though a bit slowly, until a week ago. For now I have found a temporary 'fix' by disabling automatic updates; otherwise the laptop is constantly stuck on the "failure to configure updates" error page (because, obviously, it's automatically attempting to install updates). I have done all the standard troubleshooting, including running MS Fix It, Dell Dr ('My Dell' found no hardware issues), MS Malware removal and Mcafee anti-malware. All reported "no issues". I have been in command prompt and found no issues I even tried to 'refresh' the laptop again two more times. I have also spoken to two Windows "technicians" and allowed one of them to remotely access my laptop. He found no issues or "violations".

Obviously, the temporary 'fix' of turning off auto-updates isn't a long term solution, and 'refreshing' the laptop hasn't worked (it actually caused the issue). Running Windows 8 on Dell Inspiron 3520.

I'm guessing full format needed? - Would a format resolve the issue, since a 'refresh' caused it?

View 9 Replies View Related

Updates :: Asus Eee Slate EP121 - Windows Update Failure / Error Code 80070103

Apr 27, 2012

I'm using the Asus Eee Slate EP121. This happened more than once that Windows prompted me to install an update, then fails. Sometimes the update prompt disappears even though it was not installed. Today it prompted me to install an update called "Qualcomm Atheros Communications driver update for Bluetooth Module" and failed.

Error code 80070103.

View 2 Replies View Related

Updates :: HP Ultrabook Frozen / Failure Installing Update Reverting

Feb 22, 2014

My new HP ultrabook was doing updates ... And it came up with the screen saying Failure installing updates reverting changes do not power off however its been saying this for 4 hours and i can not get out of this i even attempted to power it off and upon powering it on it comes straight back to this screen!

View 1 Replies View Related

Failure Configuring Windows Features

Sep 26, 2013

"Failure configuring Windows features. Reverting changes. Do not turn off your computer."

Stuck on this loading screen and I can't get out! What do I do?!

View 1 Replies View Related

Error / Failure Configuring Windows Features Reverting Changes

Aug 2, 2014

i just got a new MSI Laptop and i downloaded some games from steam and you know that kind of stuff. Then i had to download windows 8.1 (not from disc) and then it started downloading normally and then all of a sudden this "Failure configuring windows features Reverting changes" popped up and then i just waited and waited, i waited for about a few hours then i gave up and decided turning it restarting it but it came back and again and again i could go to the password the sign would just pop back up i tried pressing f8 and f9.

View 1 Replies View Related

Windows 8.1 Stuck In Restart Loop - Configuring Updates

Feb 19, 2014

So, since yesterday, Windows 8.1 tries to boot, then gets halfway through, shows a sad face for a second, and then restarts. It does this again and again. Just get the message "Failure configuring Windows updates. Undoing changes. Don't turn off your computer" then "Configuring Windows updates, 30% complete. Don't turn off your computer".

Then it boots, does the same thing again.

I've tried booting from the install media, but Refresh doesn't work, nor restarting in safe mode. Weirdly, pressing F2 to load BIOS, which always used to work, no longer does, it just continues trying to load Windows.

I've got an oldish PC, around 4/5 years old, with Windows 8 installed. Its got a fairly decent processor (at the time), a Q9550. Intel DP43TF motherboard.

View 3 Replies View Related

Updates :: Network Failure After Loading Latest Updates To Win 8.1

Dec 10, 2013

I am trying to get things going with my Dell Venue 8 Pro, and I go through the initial setup fine. However, when I do Windows Update the network fails to connect after the following reboot.

When I look at the device/driver, it says it is working, but when I do a network troubleshooting it claims it must be a bad driver.

The driver doesn't seem to have been updated, based on the fact that the button to roll back is grayed out.

When I do a restore of my system, it works again until I do the Windows Update.

I have done this a couple of times, once with all updates, including the optional updates, and once downloading only the critical and important updates.

Other than doing each update individually, is there a reasonable way to figure out what is causing my issue?

View 5 Replies View Related

Updates :: Manual Update And Install For Windows Update Files

Jul 28, 2014

I am tired of having to repair Windows updates then get to install one or two then have to go through the whole process again.

Is there a site where updates can be downloaded according to their KB numbers then installed manually?

View 2 Replies View Related

Updates :: Windows Update Says Downloading Updates But 0% After 1hr

Oct 24, 2013

Windows Update says it's Downloading Updates. It has said that more than 30 minutes ago. And it's still 0 KB total, 0% complete.

View 6 Replies View Related

Updates :: Windows 8 Pro - Failure To Configure When Restart

Jul 28, 2014

WINDOWS 8 PRO. I am trying to do normal updates and I can download them. When i do the restart I get FAILIURe TO CONFIGURe UPDATES. I believe i deleted something but nothing in trash. SYSTEM RESTORE IS my friend but i can't go back pass the 10th of this month...different problem.

View 9 Replies View Related

Updates :: Update History Does Not Show Any Updates?

Feb 4, 2014

My update history does not show any updates after 1/22/14. I know for sure that I have successfully installed at least a few dozen updates since then (almost all of them involving Windows Defender).

View 5 Replies View Related

Unable To Boot Windows 8.1- Possible Failure During Update

Sep 15, 2014

I have been running my desktop system under WIndows 8.1 since release, and I started having a problem the other day.

The system seems to have hung up completely, so I powered it down (it is usually up 24 x 7 since I use it as a DVR along with my computer usage).

It seemed to be ok when it powered up, but then a bit later it asked to reboot to finish installing updates.

It has not booted since.

During reboot, it displays the Windows logo and the spinning dots for a few seconds, and then the screen blanks, and my monitor loses signal. I have left it for quite a while and it doesn't come back. After some time, it goes into sleep mode (slowly flashing power indicator), so something is going on at some level. I have powered off and back on, and removed the power cord for a minute to see if anything different happened... it doesn't.

I have tried pressing F8 and Shift-F8 during reboots to try to get to safe mode, but so far no good. Last night, I used my laptop and seem to be able to access shares, but unfortunately it appears that the things I want/need most are not shared.

The bad part is that I haven't been able to locate my recovery disc, but I will continue to look.

I bought the system with Windows 7 right before 8.0 was released, and When 8.0 came out, I got the cheap upgrade and before loading it, installed an SSD for my C: Drive, and kept the existing HDD for my D: Everything has been running well until this incident.

View 1 Replies View Related

Windows 8 Update Cancelled Due To Power Failure

Aug 23, 2013

my system was restarting/updating then my brother plug his cellphone charger accidentally turning off my PC, my question is will it affect my system? haven't notice anything unusual yet

View 7 Replies View Related

Setup Installation :: Windows 8.1 Blue Update Failure

Jul 2, 2013

I tried to update the latest windows 8.1. I got the installation package but when it started saying looking for updates on this computer it said that it was not applicatable on this computer.

View 7 Replies View Related

Toshiba Service Station - BIOS Update Failure

Jul 8, 2014

the " toshiba service station " recommended an update called " bios update version 1.50 for qosmio x70/75 " and they said it is recommended so i did download and he said dont remove the cord or anything so i did that and installed it and everything was going smoothly but when he finished the update and was restarting it shut down and didnt boot up again. whenever i click the power button the keyboards and power button lits up for a second and then the laptop shuts down it is windows 8 and it does not boot up for me to go into the bios menu

View 8 Replies View Related

Debugging :: BSOD After Update Win 8 (power State Failure)

Dec 26, 2013

I'm having this problem right after installing Windows 8 update.

previously i just roll back update, but it still update automatically.

View 1 Replies View Related

Updates :: Can't Update Windows 8.1 RTM To GA

Oct 22, 2013

I have Windows 8.1 RTM installed on my computer. Some days ago, Microsoft released the GA updates for the system. Windows update downloaded them, but they failed to install... I've downloaded the updates manually and applied them in the correct order... But no luck, the updates fail to install...

Here's a photo of the updates... (in Spanish)

View 4 Replies View Related

Updates :: Windows 8.1 Update ISO Without The Store

Sep 15, 2014

I was wondering if I can update my windows 8 which came pre-installed to 8.1 without going to the store and waiting for it to be downloaded.

Is there any ISO online where I can readily download the image and update it? Its a HP laptop.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved