Maintenance :: RAM Limit On 64-bit Windows
Jun 2, 2013
I have got myself a new laptop recently with the following specs
It's a HP Pavilion G6 2253SA
Intel Core i5 3210M
Intel HD 4000 Graphics up to 1.6GB shared graphic memory
6GB RAM DDR3 at 1600MHz
1TB HDD 5400RPM
Intel HM76 Chipset
Anyway I have a 64 bit copy of Windows 8 Pro installed and this has been re-installed as I did not want to bother with all the Manufacture software that was not necessary for my system
This next part sounds silly and fussy
Anyway even after reinstallation my ram still does not go up to 6GB as it only peaks at 5.89GB and that 103MB is reserved for hardware
I plan on upgrading it to 8GB of ram however I do not want to upgrade it if all the extra memory is just going to be reserved for hardware
View 5 Replies
ADVERTISEMENT
Mar 11, 2013
The picture below is a picture of my computers information WHILE rendering a 3D-text object. I will diagnose what each picture seperately with what i want in a brief description in it. What i am also trying to do is render videos but it is wanting take over 24 Hours to rendering a 15 second clip.
(CLICK IMAGE TWICE TO ENLARGE)
The bottom photo is a picture of all my specs and what I am running (Windows 8, 64-bit, 8GB Ram, 2.50GHz, ect, ect. My laptop model is a ASUS R500A with Windows 8 pre-installed, clean. This laptop is a month old and only use it for media).
The picture on the left is a photo of my Task manager while its rendering the video. I can see the CPU is going above its limit even though I have not made any modification to my systems settings but the RAM is not being completely used? It also says 5.1GB Available, 3.0/9.1GB commited? (Even though i only have 8GB), and the Page Pool is low as hell when it should be higher? (If im correct)
The picture on the right is a picture of my virtual memory. I have 8GB of ram but the currently located is 1216MB when it recommends 4.5GB? I was thinking about maybe putting this to 4.5GB but im not sure what to set the Initial Size and the Maximum Size values too.
So basically I want to have my computer modified for rendering at the fastest speed possible. I have also gone into the settings and made sure the limited ram thing is off and it was already off.
UPDATE; I figured if my power options are set to power saving it uses less CPU but when i set it to max it uses all the CPU. This does not fix the RAM problem though.
View 4 Replies
View Related
Mar 26, 2014
I work at a large school district wherein computers running Windows 8 are shared by staff and students. How can I create a new account type (i.e. Student) and apply the fix above to limit what programs appear when students log on. I have an image for what the student access will comprise, but I don't want to cut off teachers and principals from their resources.
View 3 Replies
View Related
Jun 29, 2014
At some point a while ago, new Microsoft Store appls I buy are not showing up as Tiles on the Start screen. Is there a limit of how many tiles I can use?
View 1 Replies
View Related
May 27, 2014
Lately I am getting this error message when tying to download."You've reached the bandwidth limit for viewing or downloading files that aren't in Google Docs format. Please try again later.You can also try to download the original document by clicking here."I am using Win 8.1. does this in Chrome and Explorer, and in both Yahoo and Google search engines.
View 1 Replies
View Related
Jul 22, 2013
I noticed that automatic maintenance in Win 8 cannot be disabled. I maintain my pc regularly and do not need it. Is there a way to do it or should I let it run?
View 9 Replies
View Related
Apr 19, 2013
Having a problem with the Regular Maintenance waking the computer (Windows 8 on a Lenovo Q-190) to do its scheduled task as it's supposed to do. Here are the symptoms:
1. If I change the time for Scheduled Maintenance in the Action Center (Change Maintenance Settings), it WILL be reflected properly in the Properties of the Regular Maintenance Task in Task Scheduler.
2. However, if I check the box for "Allow scheduled maintenance to wake up my computer at the scheduled time" in the Action Center (Change Maintenance Settings), it WILL NOT reflect in the Properties of the Regular Maintenance Task in Task Schedular. Specially, I check the box to wake up my computer in the Action Center Maintenance Settings, but the corresponding checkmark is NOT reflected ("Wake the computer to run this task"), in the properties of the actual task in Task Scheduler.
3. I then put the checkmark directly in the Regular Maintenance Task itself ("Wake the computer to run this task"). However, at some point in the future, (not right away; I close and then reopen the task to make sure that it 'sticks'), the checkmark "disappears. Then, the task does not run at night while the computer is asleep, but runs in the morning when I wake the computer for regular use. At that point, the checkmark in the task is gone.
View 6 Replies
View Related
Oct 15, 2013
I deleted maintenance tasks in task scheduler (Microsoft>windows>task scheduler) because I didn't want to have automatic maintenance fire up when I'm working, but sadly... some shit got messed up. My computer starts using hdd at 100% if left idle, and then freezes and all kinds of weird crap that I'm almost positive have to do with me deleting maintenance.
which tasks do I need to re-create in task scheduler in order to have auto-maintenance once again. If you could just read to me all the tasks, triggers, and which programs they are running .
View 9 Replies
View Related
Sep 15, 2014
I had the idle & regular maintenance tasks disabled but they always re-enabled themselves. In a fit of madness I ended up deleting them but now when I open a folder with videos or images the thumbnails always display in a slow staggered way every time from left to right, If I then exit the folder & go back in they do the same again. It's almost like they are not being cached at all & are having to be redrawn every time.
The only change I have made to my system is remove Comodo firewall & install Private Firewall & delete the idle & regular maintenance tasks.
View 5 Replies
View Related
Jun 21, 2014
I have Automatic Scheduled Maintenance set to run at 3:00AM. I get to this setting by going to Control Panel > Action Center > Maintenance > Change maintenance settings. I also have the box for "Allow scheduled maintenance to wake up my computer" checked.
However, I note that if I put my computer to sleep for a few days, when I wake it back up, Automatic Scheduled Maintenance has NOT run. I can tell this because my antivirus definitions are out-of-date and haven't been updated since I put the computer to sleep.
how to figure why it's not waking up for Scheduled Maintenance? Is it possibly a BIOS setting? Do I have to manually add it to Task Scheduler? I'm running Windows 8.1 Update 1, ASRock Z87E-ITX mobo, Intel i7-4770S CPU, Samsung 840 EVO mSATA SSD, 16GB RAM.
View 4 Replies
View Related
Feb 1, 2013
I found out how to add a task to the Automatic Maintenance that runs each morning. I use Geekzone's EPG collector to fill in the guide on Media Centre and I though it would be nice for it to run as part of Automatic Maintenance rather than wake the computer up again later to do it's thing.
Here's how:
Create an XML files in notepad and paste this in...
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-02-01T19:34:03.9529687</Date>
<Author>johnofe-laptopJohnOfE</Author>
<Description>EPG Loader</Description>
[Code] ....
Save the file then in Task Scheduler, import the XML and it will appear. Edit it from there further if you want.
I got this from exporting a task that runs as part of Automatic Maintenance and edited it to suit.
the thing is, I still don't know how it works! I haven't been able to create a schedules task from scratch that runs as part of Automatic Maintenance.
Other than plagiarising existing tasks to get what I want, how it's really done?
I have what I want, and it works great being able to run all the things I want all at the same time at 3AM each day, as part of Windows' ritual. Even better, if I disable it from waking the computer, everything runs when I'm logged in and Idle. It's fantastic.
View 2 Replies
View Related
Oct 5, 2013
I'm using Intel Rapid Start function, so my PC is starting from completely off to fully desktop in less than 10 seconds (no POST, no Boot ). But I must each time remember to stop "automatic maintenance", because if it is running when closing with IRS, then it won't start again. I can find the setting to change the time of running "automatic maintenance", but I want to deactivate it for ever!! I will maintaine my PC myself.
View 9 Replies
View Related
Feb 18, 2014
I have set up scheduled maintenance on my laptop (on Windows 8.1) as:
I have also set up my laptop to go to sleep after an hour of inactivity:
So far, I have found my laptop not asleep everytime I wake up at around 7AM (two times in a row). Here are some "powercfg" outputs:
What should I do?
View 9 Replies
View Related
Sep 14, 2013
It's scheduled for 3AM, but the computer is powered down then. Does it run the next time it's powered up and idle?
View 2 Replies
View Related
Apr 6, 2013
I can't run WEI in Windows 8. I've tried to install Media N pack but unfortunately its fail to install!
View 9 Replies
View Related
May 8, 2013
Is it normal to have the disk at 100% on start up? The only program that are even using any of my disk on start up is system and svchost.
View 3 Replies
View Related
Nov 23, 2013
yesterday i tried to install a free copy of camtasia 8 the video showed a way so i can register the program free the way suggested was to go to c:/windows/system32/drivers/ect/ then try to change the security properties of the host file and add a states called everyone but isn't work for me so i canceled it, then i get a free user name and serial number from friend and register the program and working properly. I restart may computer lately and its not working , its keep restating i tried refreshing the system but its said my c partition is locked i tried restoring it using troubleshooter but it's not restoring it and tell that no restore point when try to make a one the system response is "system protection is available only in online operating system. auto recovery not working too .
View 4 Replies
View Related
Jan 20, 2014
setting up ssd and hdd. I have already moved page file on to hdd instead of ssd. What else needs redirecting to hdd. Found a set up guide when installed windows 7 but can't remember what else I did and can't seem to find it now.
View 3 Replies
View Related
Feb 9, 2013
Everything goes as it should, and when computer should shut down, monitor turns off but computer still works (leds on the case, fans and so on).
I don't know what's happening, and why? It's not every time when i shut it down, but it just happens.
I'm using Object dock Start8.
View 5 Replies
View Related
Sep 1, 2013
I want to multi OS my windows 8. Because Microsoft flight X only works on vista, XP and windows 7. So I want to get windows 7 on my PC the easy way. Like installing it with an .exe if possible .
View 2 Replies
View Related
Jul 15, 2014
supply the required information to allow me to increase RAM from 4Gb to 8Gb. My 64 bit PC has 4Gb of RAM made up from 2 of the 4 slots containing Samsung Size 2048 MBytes Max Bandwith PC3-10700 (667 MHz). I would like to increase RAM to 8Gb and would like to know if I can use spare slots 3 & 4 and add 2 x 2Gb Modules - thus making a total of 4 x 2Gb = 8Gb total. Or is it possible to use slot 3 only and add a 4Gb module? Would adding memory require alteration of the BIOS?
View 9 Replies
View Related
Aug 3, 2013
Installed 8.1 some 2 weeks ago (give or take).
Now today i wanted to look to my 2 external spindle drives if defrag had run and it did run......BUT also on my Samsung SSD's which i never do myself.
Windows 8 erroneously defrags SSDs, indeed. Doesn't look like it's been fixed in Windows 8.1.
Why Windows 8 defragments your SSD and how you can avoid this.
View 9 Replies
View Related
Apr 8, 2014
I am running Windows 8.1. Originally I had Windows 8 installed on my machine and I updated to Windows 8.1. I have files that are corrupted and I intend refreshing my PC but the process involves inserting the installation disk. But the installation disk I have is for Windows 8.
Does that mean, after refreshing my PC, the operating system will be back to Windows 8 and I will have to download Windows 8.1. all over again? And would all my settings, documents and e-mail folders all be wiped out? If so, how do I make backups of these?
View 9 Replies
View Related
Oct 28, 2013
I've done considerable research on this and still can't find the exact Windows 8 process that causes this. PROBLEM: There is a service host process that keeps the CPU busy (12%), and consequently causes my computer to run warmer than it does under Windows 7. About 15 degrees Celsius warmer. If I kill that service process, the temperature drops back to about 38 Celsius at idle.
I see others on the www complaining about this also, but no resolve.. Well, if you kill the process it fixes the heat problem, but then the computer doesn't run right without that particular host process. And if you expand that process there are about 10 to 15 sub processes. But which one is the bad boy? Task manager doesn't break it down enough to isolate it.
This is not a big deal, my computer runs fine. It just annoys me whenever I run Windows 8. I feel like I should upgrade my standard 4th gen cpu cooler, and I shouldn't have to. I don't play games.
View 9 Replies
View Related
Jul 14, 2013
Unlike windows 7 in windows 8 when i shutdown my PC, the monitor shuts down in 4-5 secs, but my CPU still runs for while(approx. 1 min), I have to wait until the whole PC shuts down. If I don't & cut the power from the UPS Battery,the next time I boot into the PC, I don't get a fast start up.
- I have 160 GB Clover 161HJ ATA Hard disk drive
- Intel dh55pj motherboard
- Intel core i3 540 processor,clocked at 3.06-3.07 GHz
View 8 Replies
View Related
Sep 22, 2012
I have windows 8 on my computer. Yesterday I turned on my laptop and it says scanning and repairing drive but it keeps getting stuck on 28%. I can't install windows 7 again because you need to get past the start up screen, which I can't.
View 9 Replies
View Related
Mar 28, 2014
My Windows 8 became laggy ever since I restarted my PC yesterday, March 28, around 5pm it was the first time I restarted my PC since Sunday, March 23. I have been looking for some solutions on Google and tried them but it didn't solved my problem.
I also haven't installed anything since March 24 and it was just Hearthstone (a game). The solutions I tried were scanning my PC using Windows Defender and ComboFix, both AV have not found issues. I also tried killing processes like sqlservr.exe, googledrivesync.exe and ReportingServicesService.exe but it didn't solve my problem also. Also, I did a System Restore which I thought would solve my problem, but didn't.
I also noticed earlier that whenever I boot in to the desktop of the OS, the UI will not lag but after a couple of minutes it will start to. It is very noticeable because the animations are slow like the animation of the sidebar when you put the cursor on the top-right or bottom-right of the screen, the animation on the Start menu and the animation of popping up of windows.
View 9 Replies
View Related
Mar 19, 2014
Does Windows 8 have a hibernate file? Is it the same as sleep? Do you have to clean-up the sleep file eventually?
HP pavilion g6-2225nr
Win 8 X64 V6.2.9 IE 10
View 3 Replies
View Related
Oct 28, 2012
I upgraded from Win 7 Home Premium to Win 8 Pro 2 days ago. Everything was fine, till it started freezing for no apparent reason. Yesterday it went for a couple of hours without freezing, but today the maximum time without having to restart it has been around 10 minutes. I'm writing this for the third time, because it froze in like 2 mins after restarting it.
It's getting really annoying, since I don't know what causes it. People said it's Chrome's fault, but my laptop froze a few times without Chrome being on. By freezing I mean the Cursor freezes and then disappears and my screen stays the same no matter what I do. Not even the Caps Lock light functions when I press Caps Lock, everything is dead.
I deleted old software that I wasn't using anyway, I updated my Nvidia Geforce 9400M G driver, I uninstalled my antivirus... I tried all the stuff people suggested (the ones that were having similar issues with those Preview versions) and nothing worked.
I knew it would have some issues being so new, but not like this. I literally can't use my laptop cause no matter what I'm doing it's bound to freeze and I have to press Power Button to force shut down and then start everything over again.
That's a photo of my frozen screen when I was trying to write this post for the second time. As I was editing this, my laptop froze again, after 10 minutes of being on. It only had Skype and Task Manager running.
View 9 Replies
View Related
Dec 22, 2013
I have started having this random problem , well its only just started the last couple of days and I haven't installed anything or changed anything. I have all monitor sleep function's set to never and every time I walk away from the computer for about 20 min the monitors seem to go off and I have to move the mouse and they come back on.
View 9 Replies
View Related
Oct 29, 2013
I recently upgraded to windows 8 from windows 7. No problem in doing so but one or two minor niggles which I have got sorted I hope.
Now then, my "D" drive which was or still has as far as I know got the factory settings on it which I guess is the restore points and things like that. It is 13.5GB and has only 2.33GB free on top of the first amount.
What I would like to know is can I format that drive and use it for windows 8 restore or has that been done by 8 when I upgraded to it. With only just over 2gb left there is not much room for restore points.
View 5 Replies
View Related
