I have a copy of windows 8 AIO how to upgrade an exixting sistem or modify it so that it can be installed? I tried to edit the ei.cfg file but when I try to install it tells me to use one copy suitable for 64bit.
My ei.cfg modified
[EditionID]
ProfessionalWMC
[Channel]
OEM
[VL]
0
I have a Toshiba (satellite) laptop and it has just been upgraded to Windows 8.1. I made recovery discs before the upgrade but would like to backup again after the upgrade so i don't have to revert to the factory set-up or refresh option as I have already had that experience and i don't want to go that route again! My laptop is only 9months old & running fine so far with no issues, i can back-up my documents etc to my flash drive but i would like to back up, 'or do you call it copying', the whole setup so if i have a problem i can re-install the whole lot as it stands from today. I have increased the system restore percentage bar to allow more restores points as another safety option.
View 7 Replies View RelatedYesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:
Couldn't install Windows 8.1
Contact your PC manufacturer to see if you can upgrade the System BIOS
When I clicked the OK button, it then gave me the informative and grammar-challenged error box:
Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104
Try again Cancel
Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.
Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:
This PC doesn't meet system requirements
Contact your PC manufacturer to see if you can upgrade the System BIOS
Obviously, no BIOS updates are available, and what exactly is the problem here with my BIOS. The obvious googling turned up nothing except some people with Sony Vaios that had the same problem, which was corrected with a BIOS update, and of course, there is no information on what their BIOS update does to make the 8.1 upgrade possible.
I've just upgraded from win8 to win 8.1 using the windows update (store), my questions are :
1. Can the ISO file that was automatically downloaded by the system during windows 8 upgrade to 8.1 be saved or backed up? the download was about 2.6 GB.
2. If so can the backed up file be used to do a "clean install" in future on the same machine?
I just purchased a Win 8 PC (gateway) to replace a Win XP PC (Compaq); both are desktops. The OS (XP) crashed weeks ago; although it was re-installed and seem to work, it was just too much work to bring it up to date. Therefore the new Win 8.
I have a large collection of files on the XP that I would like to bring over to Win 8. The XP cannot yet be connected to the Internet; but its USB ports works fine.
Any way I can connect the two through USB to copy files from the XP to the Win 8?
I have some old software that still runs fine on Windows 8 but with one exception in the way *some* Fonts are being handled.
The old software uses "MS Sans Serif" which is not a TrueType font. Up until win7 this was fine as the font displayed well. In Windows 8, it is skinny stick characters and n some cases, barely readable.
What I would like to do is to make a copy of the "Microsoft Sans Serif" which is a TT Font and copy it to the "MS Sans Serif," over-writing it so that both Fonts will have different file-names but the same contents. Then when the old app runs next time, I will again be able to see stuff.
Problem is when I tried to copy the Font in the Font Folder I got a message "Only a trusted installer can do this."
I bought a maxell 700mb Cd when i first inserted it to my computer it gave me an option to burn like usb I selected that after that it formatted and then it didnt showed the free space and when i copy something to it says to burn when i click burn it opens media player and media players says cd rom is idle and the name the cd drive is showing DVD RW Drive F and the icon is there is a drive and a cd on it i am using windows 8.1 hp pavilion g6 1242se when i insert other cds they work.
View 3 Replies View RelatedCopy menu works ok, but unable to paste because it throws me back briefly to the Metro window. This behavior doesn't work consistently but I have to log out and back in in order to correct it. Even reboot doesn't work.
Note: this is the File Explorer, not the internet browser.
I have some videos I created on DVD as well as some personal audio CDs I created. I need a simple disk copy to create additional copies of them. The computer came with Win7 and a stripped down copy of Roxio, but that won't work now that I'm on Windows 8 (bad decision, but that's another story).
I am looking for a way to do these simple copies that:
is not too expensivedoesn't install bloatwareworks (reviews on most products I've looked at are horrible)does not have to do anything else, but if it does, OKworks on the Windows 8 desktop
Any solutions to doing a simple copy of video DVD (personally created, no copy protection) and audio CD that meet the above criteria?
Windows 7 doesn't have this issue.
I'm using a Intel 520 SSD (the ssd has all OK SMART, almost empty, and no background programs running).
For example when i copy-paste a small folder on the SAME SSD but on different locations, let's say 50mb, (or some files 50-70-30mb) everytime i see the copy window appearing, says copying, etc.
And on Windows 7 on the same files copy-paste, that procedure was instant, no window appearing that says copying.
And even a 360kb file opens the copying window. I have a 3770k 4.5ghz, 8gb ram, 680gtx.
So it's related to Windows 8, due to no updates to improve performance ?
My friend is running a cracked version of Windows 8 and he got the "activate windows" watermark on the screen.
He wants to buy a legal copy of windows 8 but he doesn't want to format and reinstall. Basically, he just wants to buy it so the watermark can disappear.
So is there a way to pay to register a cracked copy of Windows 8 without having to reinstall ? How ?
I can't use the native Windows 8 copy/paste. Copy works, but when I paste, I get the "waiting" cursor, then get dumped to the Metro screen. So far, the only way I can move or copy things is with CFiShellToys or TeraCopy, and I installed these only after the Native Windows 8 Copy/Paste kept failing.
I've already run SFC at the command prompt, and according the the results, all is well.
I checked the Event log, and here it is.
Faulting application name: explorer.exe, version: 6.2.9200.16384, time stamp: 0x50107dbc
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
I've tested hardware, memory, no faults.
Win 8 Pro 64Bit
16gb DDR3
Sony Vaio E Series Laptop SVE15118FG i7 2.1GHz
My new PC should arrive today(7/3) or on sunday(7/6),i want to install my OS(Windows 8.1 Enterprise 64bit) on it.
I just don't want to spend time downloading & installing all the Windows Updates,so any way to copy my current OS at it's updated state so i could install on new PC?
I have ASUS laptop which came with pre-installed Windows 8.1 X64.
When I try to install a second copy of Windows 8.1 X64. I get the following message
"Windows can not be installed to this disk. The selected disk is of the GPT partition style"
I found suggestions at
#1 - How to "Clean" or "Clean All" a Disk with the Diskpart Command ... [URL] ...
#2 - ANOTHER TUTORIAL
I would like to know
1. Clean command of Diskpart will mark data on the HDD as being deleted. How do I recover my original Windows 8.1?
2. Does this command change GPT partition style to something else?
3. I have 2 HDD,
Disk 0- empty (1 TB)
Disk 1- OS and recovery partition etc (1TB)
Can I use clean command on Disk 0 (which is empty) . Will mix and match work?
4.Can I have more than 1 boot partition on GPT partition type?
I do not want to change Disk 1 due to my service warranty conditions.
I suppose I could use Word instead of notepad, but I don't want to wait forever for the files to open. Windows8 and 7 will let you open as many different copies of the same txt file as you want. With keeping my computer on most of the time, and doing various things, sometimes I forget that I have a file open. The most common instance is my list of software keys and activation codes. I had to reinstall something yesterday and had the file open, and it ended up behind a bunch of windows. Much later, I bought a new piece of software and had to add something to the list, a couple of somethings. I saved and closed--fine. Then, turning the computer off, it told me that my "Versions" file was still open--did I want to save, or what? At that point, I had to cancel the shutdown, open the saved copy, compare the saved copy with the one that was still open to see which information was different. Obviously, at that moment, I had not figured out which copy was which. If I had saved, it would have overwritten the changes, by reverting to the old version that I had open. I've had this happen several times, sometimes with new information in each file. I fail to understand why, when I try to open a txt file, Windows does not alert me that it is already open, and do I want to open another copy?
View 3 Replies View RelatedSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 Pro, 64 bit
Processor: AMD E-300 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 2666 Mb
Graphics Card: AMD Radeon HD 6310 Graphics, 384 Mb
Hard Drives: C: Total - 281129 MB, Free - 233356 MB; D: Total - 19850 MB, Free - 2098 MB; E: Total - 4055 MB, Free - 935 MB;
Motherboard: Hewlett-Packard, 3577
Antivirus: Windows Defender, Disabled
I am trying to build a recovery drive on a USB flash drive for Win 8.1. I have been unable to copy the Recovery Partition from the PC to the recovery drive. It appears to be disabled when I view it from the Recovery Drive. I have discovered that in Windows 8.1 the recovery partition is installed in a INSTALL.WIM file format. How do I locate the Windows 8.1 INSTALL.WIM file and how can I register the INSTALL.WIM file as the Recovery Image on my PC?
I downloaded the Windows 8.1 Enterprise evaluation kit and became totally lost.
Recently I took sony vio labtop with touch screen. How can i do copy & paste for text by using touch screen only.
O.S : Windows 8.1
Is there any way to install Windows 8 over an eval copy? I don't want to lose my programs.
View 5 Replies View RelatedI am running Windows 8.1 and it appears that my hard drive needs to be replaced. When the machine is turned on, frequently there is a slight screech and I feel it's best to replace the hard drive.
How do I make an exact bootable copy of the hard drive on a new hard drive and simply replace the drive with the new drive without having to reinstall Windows 8.1 or other programs and without affecting any of the files currently on the machine? If cloning software is required, are there any free programs I can download?
I recently purchased an 64GB SDXC card and formatted it to Fat32. Sometimes it works, but most of the time I am unable to copy files to it. Windows 8 keeps saying problem with drive or something that pops up in top right corner. Anything I can do about this? The SDXC card is Pixtor SanDisk.
View 1 Replies View RelatedCurrently running WinXP, meets all requirement for Windows 8. However, when I try to copy the ISO file to USB using Win7 DVD download tool to create a bootable USB device, the USB I'm trying to copy it to will not show up in the list of "Devices to Copy In".
I have tried this several times with 2 different USB drives, both 8GB, one with more than 4GB free and the another is completely empty. They both work perfectly well, but when I reach the screen with the list of devices to copy the ISO file on to (Step 3 of 4, Win7 USB/DVD Download Tool) they don't show up on the list despite re-inserting them and refreshing a couple hundred times. The only removable device that does show up is the Floppy Disk.
I am using the DVD is not an option, since my DVD player crashed last week and I don't have the time to get it fixed right now, and I'd really like to get Windows 8 installed as soon as possible.
When remoting from a Windows 7 machine to a Windows 8 machine copy and paste do not function. I restarted the RDPClip service on both machines, this can be replicated on multiple machines (this is in work environment).
We are going to be deploying Windows 8 company-wide once we get little issues such as this sorted out. I'm curious whether something changed that might need to be implemented with our group policy. We did not have an issue with this before so it's definitely specific to OS.
I need to download/copy a .bin file to the root directory for each operating system.
View 4 Replies View Relatedhow I may update my Windows 8 Pro computer to 8.1 and then to the 8.1 update, if possible.
It's a volume licensed copy of Windows and I have no access to these updates. From what I've read, I need an MSN (what ever it's called) subscription to have access to these updates. I've seen articles around the web with ways to update, such as this one William's Blog: How to upgrade Windows 8 volume license to Windows 8.1 from the Windows Store but I do not want to do anything illegal or mess up my computer.
I found that my two Windows 8.1 laptops will not copy the entire contents of any folder to my Iomega network drive. Only the folder alone is copied and none of the sub-folders or individual files. I can copy individual files separately, but not the whole folder sub-folder, and files together. I have no problem doing this with my Windows 7 desktop PCs. My network drive is connected directly to my Apple Airport Base Station router.
View 4 Replies View RelatedI want to create recovery disc (from recovery partition of my laptop), but I'm not able to do it in Win 8.1. They removed this option in Win 8.1.
I'm able to create recovery usb. I tried to copy all files from usb to BluRay and burn (in Linux). But I'm not able to boot from BluRay, boot from USB work's. how to create bootable BluRay? Or how to copy files from usb to BluRay and make BluRay bootable?
Ok, I'm up the wall on this, I'm trying to get a copy of Windows to install on a flash drive and boot from BIOS, but there's almost now way of doing so.
I remembered that Windows 8 7850 build had or has a feature called Portable Workspace where Windows will install onto a flash drive so you can take it to any puter you please. That's great and all, but where in the blue hell is it?! :stomp: It's like it's not there. Do I need something special to do something to it or what?
When I use Explorer on Windows 8.1 to copy multiple FLAC files to a folder on the SD card of my Nokia Lumia 625 (running on Windows Phone 8.1) via USB, a dialog window pops up in Explorer, asking me to choose between converting and just copying. If I choose to just copy, a progress bar appears, and it always gets stuck at the end of the first file transfer so I have to cancel or close the progress window, and, as a result, only the first file is transferred. If I copy a single FLAC file instead of multiple ones, the same thing happens at the end of the file transfer. So I am forced to copy the files one at a time, and I have to close the popup window for each of them. Is there any way to solve this?
View 3 Replies View RelatedI have tried disabling the UAC. Creating a new administrator, enabling the Built in admin account, taking ownership of the files...
View 7 Replies View RelatedI have windows 8 - I had created a doc on facebook and find that I can not paste URLs into this document.
I have tried using Google Chrome, Internet Explorer 8 and now Firefox.
Eventually I managed to copy on all 3 servers but I could not paste into my document using any of them.
I have now got it to work on Firefox (after several goes)but Google Chrome is my main server (it works better for the things I do), and I believe it is a W8 issue, so how to paste URLs using W8?
pop up says files ready to be copied to disk but when I put a disk in new popup says there is a formatting problem
View 3 Replies View Related