I just purchased a Win 8 PC (gateway) to replace a Win XP PC (Compaq); both are desktops. The OS (XP) crashed weeks ago; although it was re-installed and seem to work, it was just too much work to bring it up to date. Therefore the new Win 8.
I have a large collection of files on the XP that I would like to bring over to Win 8. The XP cannot yet be connected to the Internet; but its USB ports works fine.
Any way I can connect the two through USB to copy files from the XP to the Win 8?
I bought a maxell 700mb Cd when i first inserted it to my computer it gave me an option to burn like usb I selected that after that it formatted and then it didnt showed the free space and when i copy something to it says to burn when i click burn it opens media player and media players says cd rom is idle and the name the cd drive is showing DVD RW Drive F and the icon is there is a drive and a cd on it i am using windows 8.1 hp pavilion g6 1242se when i insert other cds they work.
I want to create recovery disc (from recovery partition of my laptop), but I'm not able to do it in Win 8.1. They removed this option in Win 8.1.
I'm able to create recovery usb. I tried to copy all files from usb to BluRay and burn (in Linux). But I'm not able to boot from BluRay, boot from USB work's. how to create bootable BluRay? Or how to copy files from usb to BluRay and make BluRay bootable?
I was attempting to copy some files to my DVD. I selected them and chose "Send to" and selected my DVD drive. I now got a window saying, "Files ready to be written to the DVD".
(1) How do I get it to write the files. (2) If I wanted to cancel the operation how do I do that?
Every time I put a blank DVD in the drive it comes up with that same message and I can't seem to be able to get rid of it.
I have a large collection of car photos spanning several years and growing, +300,000. I am now trying to combine them by year of make. There are many files with the same name like "1930 CarMakerName." I cannot take the time to review every conflict at transfer time, much quicker and easier to see them in an Icon view.
Is there any way to have them automatically renamed like every other previous version of Windows that I have used?
Got Win8 Pro Retail genuine installed and have a multi partitioned PC.
I am Administrator, and I have UIC set to its lowest possible setting.
I cannot copy any files to the C: Drive (root)... every time I get an error message and it will not let me do anything with the root.
So, I ran gpedit.msc and did these steps..
1. Run gpedit.msc, navigate and browse to Computer Configuration--Windows Settings--Security Settings--Local Policies--Security Options 2. Set policy User Account Control: Behavior of the elevation prompt for administrators - Elevate without prompting 3. Set policy User Account Control: Detect application installations and prompt for elevation - Disabled 4. Set policy User Account Control: Run all administrators in Admin Approval Mode - Disabled
OK, now perfect - I have full control of the root drive again... But this sparked another major issue with the 'modern apps' (metro)...
All modern/metro apps will now NOT RUN because they want UIC turned on (as in change those settings back I just tweaked).....
As soon as I turn UIC back on.... metro apps work - and I am blocked from my root drive again.
Is there any sort of advanced options when a file conflict is encountered when copying files? The "Skip x file(s) with the same date and size" option is nice, but I'd often like to skip files which only have the same size and the date may be the same or different - it's unimportant. Is there any way to do this? It would also be nice if, when copying a folder for example, it would display specifically which file was being transferred at the time.
Location is not available to mapped network drive in Windows 8 I'm trying to copy a file from my mapped network drive, which is something I've done 1,000+ times in Windows 7, but for some strange reason I get a location unavailable error when trying it in 8. I tried deleting and remapping the drive and then tried restarting the computer. Neither of these resolved the issue. I've noticed that I can copy it to my desktop but nowhere else. See the attached images for more information.
I am using EaseUs Todo Backup Home. I relocated the installer folder's files from ssd to hd. Do I need to copy the files back before I do a system backup?
I read the tutorial on building a Windows EFI USB stick from the Windows ISO. I want to build an EFI/USB from an ISO of a bootable third party application, which is not designed to boot from UEFI. First, I went through the steps in Diskpart. Then, I copied the files from the third party ISO to the USB stick. Screenshot 34 shows the objects listed from the third party ISO. The second screenshot (35) shows what I have on my Win 8.1 ISO. I tried to just copy the efi folder and bootmgr files from the Win 8 ISO, but my Win 8 system (a VM) didn't like that at all. !
i want to copy my C: to new HDD. i also want to put the bootfiles in separate Boot-partition in new HDD. the boot-files are currently together with windows partition in C: in old HDD.
How can i copy my current windows to work on new HDD and also the bootfiles in separate partition?
I have a Desktop and a Laptop, both wirelessly connected to a router, and part of a HomeGroup. Sharing over HomeGroup works like a breeze. Occasionally I need to copy something large between the 2, so I connect an Ethernet cable.
To actually transfer the files, currently I have to : disconnect wifi from both, else step 3 won't work assign 192.0.0.0/24 addresses to each of them, setting no gateway try to browse the network, upon which I can force the conversion of network type to private upon which I might still have to manually type in the IP address in UNC format (192.168.1.3)I have to authenticate as my user account on the other machine. Then I have to share the required folders... Sometimes "pulling" the files doesn't work, upon which I have to assign write permissions onto a folder on the destination computer and "push" the files. Ugliest thing I have encountered.
I hate this process with a passion, because I have to do it every time. I have no clue how or why Windows decides a particular network to be "Identified" or "Unidentified". I would like some way of forcing Windows to treat all PC-to-PC connections as private (this arrangement is obviously VERY private, about as private as it gets), so that sharing is enabled, and so that it is recognized as a part of the HomeGroup, and then if I change the order of preference to Ethernet > WiFi, I should be able to have it automatically transfer over WiFi+Ethernet, just WiFi, or just Ethernet depending on which link is up....
1 is 55gb kingston ssd where i run my windows 2 is 1tb hitachi where i keep my games and other junk 3 is seagates 250gb laptop hdd.
The main problem was that sometimes when opening or just clicking some folders freezes the file explorer and it crashes after it, so i tought to format the second hdd to make it work better now it seems work ok except for moving files from hdd to another.
When copying the copy speed just at random point drops to 0% and leaves the hdd 3 to hang 100% and the hdd 2 is dropping to 0%. What i have tried:
I ran hdd regenerator and 18 bad sectors were fixed Also tried to change sata ports That's not much but can't figure anythin else for now and i am starting to suspect that my hdd is gone bad :/ also when downloading ~100mb file from internet it makes same thing but i don't know is it same problem...
I have an ASUS RT-AC68U router with 9 DBI dual band antennas. I need a program that allows me to copy and paste files to the external hard drives which are connected to the router's USB ports. An example of the application I am seeking is called "Silex Virtual Link", I need one like this, I used to use this 1 on my old D-Link DIR-825 router but it is not working with my new ASUS router and ASUS tech support couldn't solve anything.
I have some old software that still runs fine on Windows 8 but with one exception in the way *some* Fonts are being handled.
The old software uses "MS Sans Serif" which is not a TrueType font. Up until win7 this was fine as the font displayed well. In Windows 8, it is skinny stick characters and n some cases, barely readable.
What I would like to do is to make a copy of the "Microsoft Sans Serif" which is a TT Font and copy it to the "MS Sans Serif," over-writing it so that both Fonts will have different file-names but the same contents. Then when the old app runs next time, I will again be able to see stuff.
Problem is when I tried to copy the Font in the Font Folder I got a message "Only a trusted installer can do this."
I have a copy of windows 8 AIO how to upgrade an exixting sistem or modify it so that it can be installed? I tried to edit the ei.cfg file but when I try to install it tells me to use one copy suitable for 64bit.
Copy menu works ok, but unable to paste because it throws me back briefly to the Metro window. This behavior doesn't work consistently but I have to log out and back in in order to correct it. Even reboot doesn't work.
Note: this is the File Explorer, not the internet browser.
I have some videos I created on DVD as well as some personal audio CDs I created. I need a simple disk copy to create additional copies of them. The computer came with Win7 and a stripped down copy of Roxio, but that won't work now that I'm on Windows 8 (bad decision, but that's another story).
I am looking for a way to do these simple copies that:
is not too expensivedoesn't install bloatwareworks (reviews on most products I've looked at are horrible)does not have to do anything else, but if it does, OKworks on the Windows 8 desktop
Any solutions to doing a simple copy of video DVD (personally created, no copy protection) and audio CD that meet the above criteria?
I'm using a Intel 520 SSD (the ssd has all OK SMART, almost empty, and no background programs running).
For example when i copy-paste a small folder on the SAME SSD but on different locations, let's say 50mb, (or some files 50-70-30mb) everytime i see the copy window appearing, says copying, etc.
And on Windows 7 on the same files copy-paste, that procedure was instant, no window appearing that says copying.
And even a 360kb file opens the copying window. I have a 3770k 4.5ghz, 8gb ram, 680gtx.
So it's related to Windows 8, due to no updates to improve performance ?
My friend is running a cracked version of Windows 8 and he got the "activate windows" watermark on the screen.
He wants to buy a legal copy of windows 8 but he doesn't want to format and reinstall. Basically, he just wants to buy it so the watermark can disappear.
So is there a way to pay to register a cracked copy of Windows 8 without having to reinstall ? How ?
I can't use the native Windows 8 copy/paste. Copy works, but when I paste, I get the "waiting" cursor, then get dumped to the Metro screen. So far, the only way I can move or copy things is with CFiShellToys or TeraCopy, and I installed these only after the Native Windows 8 Copy/Paste kept failing.
I've already run SFC at the command prompt, and according the the results, all is well.
I checked the Event log, and here it is.
Faulting application name: explorer.exe, version: 6.2.9200.16384, time stamp: 0x50107dbc
My new PC should arrive today(7/3) or on sunday(7/6),i want to install my OS(Windows 8.1 Enterprise 64bit) on it.
I just don't want to spend time downloading & installing all the Windows Updates,so any way to copy my current OS at it's updated state so i could install on new PC?
I suppose I could use Word instead of notepad, but I don't want to wait forever for the files to open. Windows8 and 7 will let you open as many different copies of the same txt file as you want. With keeping my computer on most of the time, and doing various things, sometimes I forget that I have a file open. The most common instance is my list of software keys and activation codes. I had to reinstall something yesterday and had the file open, and it ended up behind a bunch of windows. Much later, I bought a new piece of software and had to add something to the list, a couple of somethings. I saved and closed--fine. Then, turning the computer off, it told me that my "Versions" file was still open--did I want to save, or what? At that point, I had to cancel the shutdown, open the saved copy, compare the saved copy with the one that was still open to see which information was different. Obviously, at that moment, I had not figured out which copy was which. If I had saved, it would have overwritten the changes, by reverting to the old version that I had open. I've had this happen several times, sometimes with new information in each file. I fail to understand why, when I try to open a txt file, Windows does not alert me that it is already open, and do I want to open another copy?
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 8.1 Pro, 64 bit Processor: AMD E-300 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0 Processor Count: 2 RAM: 2666 Mb Graphics Card: AMD Radeon HD 6310 Graphics, 384 Mb Hard Drives: C: Total - 281129 MB, Free - 233356 MB; D: Total - 19850 MB, Free - 2098 MB; E: Total - 4055 MB, Free - 935 MB; Motherboard: Hewlett-Packard, 3577 Antivirus: Windows Defender, Disabled
I am trying to build a recovery drive on a USB flash drive for Win 8.1. I have been unable to copy the Recovery Partition from the PC to the recovery drive. It appears to be disabled when I view it from the Recovery Drive. I have discovered that in Windows 8.1 the recovery partition is installed in a INSTALL.WIM file format. How do I locate the Windows 8.1 INSTALL.WIM file and how can I register the INSTALL.WIM file as the Recovery Image on my PC?
I downloaded the Windows 8.1 Enterprise evaluation kit and became totally lost.
I am running Windows 8.1 and it appears that my hard drive needs to be replaced. When the machine is turned on, frequently there is a slight screech and I feel it's best to replace the hard drive.
How do I make an exact bootable copy of the hard drive on a new hard drive and simply replace the drive with the new drive without having to reinstall Windows 8.1 or other programs and without affecting any of the files currently on the machine? If cloning software is required, are there any free programs I can download?
I recently purchased an 64GB SDXC card and formatted it to Fat32. Sometimes it works, but most of the time I am unable to copy files to it. Windows 8 keeps saying problem with drive or something that pops up in top right corner. Anything I can do about this? The SDXC card is Pixtor SanDisk.
Currently running WinXP, meets all requirement for Windows 8. However, when I try to copy the ISO file to USB using Win7 DVD download tool to create a bootable USB device, the USB I'm trying to copy it to will not show up in the list of "Devices to Copy In".
I have tried this several times with 2 different USB drives, both 8GB, one with more than 4GB free and the another is completely empty. They both work perfectly well, but when I reach the screen with the list of devices to copy the ISO file on to (Step 3 of 4, Win7 USB/DVD Download Tool) they don't show up on the list despite re-inserting them and refreshing a couple hundred times. The only removable device that does show up is the Floppy Disk.
I am using the DVD is not an option, since my DVD player crashed last week and I don't have the time to get it fixed right now, and I'd really like to get Windows 8 installed as soon as possible.
