Hardware Drivers :: Windows Action Center Notifying To Scan Drive?
Jul 26, 2013
I have a Windows 8 Toshiba Satellite S855-S5377 laptop. My problem is that I get notified all the time by the Windows Action Center that I should scan my drive for errors even though I already have multiple times. I've already opened the command prompt and typed chkdsk /f /r and did the scan on boot up. I checked the log with the Computer Management Console and didn't find any problems with the hard drive. I also have used other HDD error checking tools and have even used the error checking utility of Windows when you right click the drive choose properties then tools. And every time the PC or the program says my drive is fine but the Action Center warning message doesn't go away.
View 9 Replies
ADVERTISEMENT
Apr 26, 2013
Every few days I get a message in the Action Center that says I need to update and Run Defender.
I have real time protection and everything else turn on, why doesn't it do this on it's own.
Also I don't see any options as there used to be about when to run scans i.e. time and how often etc.
As far as I can see it has never quarantined anything but when I manually run a scan it come up clean, not surprising I guess because I run Malwarebytes every day, and SuperAntiSpyware regularly, and I'm using Comodo firewall.
I did run a fake test virus and it caught it immediately so it seems to be working fine.
View 7 Replies
View Related
Mar 30, 2014
So the problem is that i always face this action center message:
I always click on turn on so it dissapears but it get back on after a while or after restarting the computer.
View 3 Replies
View Related
Apr 17, 2013
I have Windows 8 x64, Action Centre scans for drive errors at least once a week, when I run
fsutil dirty query C:
I get a "not dirty" on all my Hard drives, why does Action Centre want to check so often, I cannot find any task in Task Scheduler related to this.
View 9 Replies
View Related
Jul 26, 2013
I recently had to do a factory restore on my system. I reinstalled Norton Internet Security using the existing product key I have. Today my action center says virus protection turned off;
I hit view Antivirus apps and this comes up
I click on Norton Internet Security then click turn on, this is what pops up
I click on yes, I trust this publisher to run this app, However nothing happens. It still says that Norton Internet Security is turned off. I went into Norton Internet Security, it says that my system is secure and even ran a full system scan for good measure.
Is there a reason why action center is saying that antivirus protection is turned off?
View 5 Replies
View Related
Jan 5, 2014
I have this identical problem mentioned here : Scanning and repairing volume (?Volume...) on startup
I think it has something to do with my deleting the 'system reserved' 350mb partition when I reinstalled Windows 8. I don't want it showing in My Computer and when I go into Disk Management and give it a drive letter, this message goes away on boot. But, since I can't merge this very small partition with any other drive, I'm not sure how to not show this drive and not get the scanning message on boot up.
View 9 Replies
View Related
Feb 24, 2014
I have some questions regarding the new Chkdsk in Windows 8 (I'm using Windows 8.1 Pro 64bit).
note that Windows 8's Chkdsk has changed considerably since the previous Windows versions; so if you know about the Chkdsk in Windows 7 or previous Windows versions, this could not apply to the Chkdsk in Windows 8.
I also point out that I'm talking about the GUI version, accessible from the drive's properties Window.
My main questions are: when Chkdsk has finished scanning, and the results window appears, can I at once proceed with the following, or should I wait some time:
1) In case of an external USB drive, disconnect the hard drive (with "safely remove hardware", even if the cache is turned off), and turn it off.
2) In case of an internal drive (HDD or SSD), reboot Windows, or turn off the computer.
My worry is that if I would disconnect a USB drive, or reboot or turn off the PC in case of an internal drive, before the Chkdsk-related activity is finished, then the file-system of the disk in question could get damaged.
My doubts come from the following facts:
- I have been told that when the Chkdsk results window appears, this means that Chkdsk has finished working with that drive; but I have noticed that some short drive activity is happening some seconds (about 6) after the results window appears (should be a write activity, not sure if also read activity). I noticed this by observing the LED on my USB drives, and also by monitoring the drives in question with Windows 8's new Taskmanager.
- In case of disconnecting USB drives, I have been told that I can be sure that if some drive activity is happening, then the "safely remove hardware" feature won't have effect, and would warn me that there is disk access going on; but I have tried to select "safely remove hardware" while Chkdsk was in the middle of a scan, and the result was that Chkdsk got interrupted (with an error messsage appearing probably from Chkdsk), and the USB hard drive got removed. Though this seems not to have caused any file-system errors (I did another Chkdsk scan later).
You may think that I just need to look at the drive's LED, or monitor the drive's activity with the new Taskmanager, and take note of after how much time the drive activity ceases. Then I would just need to wait so long before disconnecting the USB drive, or rebooting or turning off the PC.
My problem here is that I'm not sure if the new Taskmanager, or the drive's LED, are sensible enough to detect even the smallest disk access, which could get unnoticed. I'm not sure how much I should wait... seconds? Minutes? What do you think? Perhaps there's no need to wait at all?
I did some tests by disconnecting (with "safely remove hardware") a USB drive shortly after doing a Chkdsk on it. Then I did another Chkdsk after turning it on again. I didn't get any error message from Chkdsk. But I'm still worried that there could be an unfortunate moment, during which a disconnection (still with "safely remove hardware") could cause problems, perhaps because in that moment a write operation could be in process.
I think I have read that the new Chkdsk in Windows 8 uses VSS ("Shadow Copy") to check the drives while keeping them online. With this new Chkdsk, I think it is possible to continue using the drive while the scan is happening, even on the system drive.
I was thinking about this: is it possible that the short activity which I have noticed after Chkdsk's results window appears, comes from this Shadow Copy Service, which is "unmounting" (?) the shadow copy used by Chkdsk?
If this is true, is it important to let the "unmounting" task happen, or can I disconnect, reboot, or turn off before it starts? And what happens if I interrupt this "unmounting" task in the middle, while it is in process?
Does it make some sense to wait some time after doing a Chkdsk, or can I at once proceed to disconnect the USB drive, or reboot or turn off the PC (in case of internal drives)?
View 1 Replies
View Related
Dec 8, 2013
I know that Windows Fax and Scan is not an ideal solution for scanning, but I'd like to avoid installing additional third party software, if possible.
WF&S works fine with my (Canon) scanner. It scans without a hitch. However, it is only able to use the default scan profile. If I try to create my own scan profile, I get this message:
"Windows can't load your scan profile. Your profile settings might not be compatible with this scanner."
I know that my intended profile settings (600 dpi, scan to PDF) are compatible with my scanner. How can I get WF&S to create a profile with my settings?
View 1 Replies
View Related
May 1, 2014
new build win 8.1 I am trying to configure an HP printer driver to digitally scan to a specific folder on a hard drive it says "the device needs to authenticate itself on the network before it can save to a network folder" then asks for my user name and password (not the wireless router name and password) direct Ethernet connection from main computer to router I have tried many variations without success how do I figure out my network computer and user name: in net speak ? e.g. ????????username ?? the Microsoft account adds a whole new level of complexity and woe is my user password my pin number or is it my MS account password or something else is my user name "Robert" as listed in windowsusers folder or is it some variation of in "netspeak" my new build screams but I am undergoing the usual trials of a new clean install (Win 8.1)
View 6 Replies
View Related
Jul 6, 2012
I have my HP 8500 Pro set up to print, but I cannot scan. Any word on how to do this? When I went to scan/fax, it says that I have no scanner hooked up.
View 9 Replies
View Related
Apr 14, 2013
If I plug in a drive (via a hub) and it does not appear in the drive list, is there a way to force a scan for new drives?
View 8 Replies
View Related
Feb 23, 2014
I have a eHome IR Transceiver/Receiver and a Media Center Remote ,from a previous PC.
This receiver connects to a USB port and it is recognized in the Device Manager with the drivers, it says the device is working correctly there.
It's listed under Human Interface Devices as Microsoft eHome infrared transceiver, also in System Devices - as Consumer IR Devices.
I have a Hauppauge WinTV Tuner card.
Remote is not being detected by Windows Media Center or in WinTV app.
WinTv has an app IR Remote which is being started, also a config tool which does detect the remote.
I have Windows 8.1 Pro 64 bit with Media Center.
How to make this possibly work for Media Center, since nothing shows in settings of Media Center or WinTV.
Could be possible it is an older model transceiver,may not work, but it is being detected by Windows.
View 1 Replies
View Related
Mar 5, 2013
I've started getting the message Microsoft Mouse & Keyboard Center has Stopped Working (see error report below) when Windows 8 starts. I've tried uninstalling and re-installing the latest version of the Mouse & Keyboard Center but still have the same problem.
Problem signature:
Problem Event Name:APPCRASH
Application Name:itype.exe
Application Version:2.0.162.0
Application Timestamp:50934cc8
Fault Module Name:KERNELBASE.dll
[Code] .....
View 9 Replies
View Related
Sep 6, 2013
It doesn't fall asleep. I have it set to turn the display off at 10 minutes, and to go into sleep mode at 15. That works perfectly!
But, how when your PC is starting up or waking up, and when the cursor first displays, it works intermittently? You can try to move it around, and it doesn't react very well. Not until your PC is fully awake.
This happens every time I don't touch my keyboard or mouse for between 3 and 4 minutes. Then it takes about 20 seconds to fully wake up after I touch the keyboard or mouse. Drives me nuts!
I don't have any unusual or unknown programs on my PC, and I don't believe it's malware. Otherwise my PC runs great. Fast.
View 3 Replies
View Related
Feb 14, 2013
When I first installed Windows 8 my system used to go to sleep after 30 minutes of inactivity and then resume on pressing any key. Recently, without any apparent changes to settings, it will not resume and the power button has to be actioned requiring a loggin. what setting controls all of this. I also am confused by difference between sleep and hibernate!
View 2 Replies
View Related
Mar 5, 2013
I'm booting off my SSD which is drive C: and I have games and programs on an extra hard drive which was origanally drive H: but after a restart it switched to I: and when I go into Disk Management to change it Drive H: isn't there.
View 3 Replies
View Related
Jul 1, 2014
When I go to Computer Management my main (OS) drive shows as "Disk 1" and my 2nd internal data drive shows as "Disk 0". Should I switch the SATA cables so that the main drive will show as "Disk 0 and the 2nd internal drive as "Disk 1"?
View 5 Replies
View Related
Sep 15, 2014
I am running an app that has buttons with momentary action, ie when you click and hold the button stays down, releases when you release the mouse button. At the moment I am stumped at how to replicate this with the touch interface. I have disabled the hold for right click option but still no good.
It looks as though the click action is done once you take your finger off the screen.
View 1 Replies
View Related
Aug 6, 2014
When I close a tab, then the displaying tab is the right-side tab, but what I really want is to display the previous viewing tab, how can I make that?
View 6 Replies
View Related
Sep 15, 2014
I have recently purchased a laptop with windows 8.1. After I had to delete some search engines - apart from yahoo and google, I find that I am now unable to upload email attachments in my yahoo webmail and unable to upload photos in facebook. I don't know whether the 2 things are connected, I just noticed the problem after I had done this action. When I try to attach/upload I get a page telling me skydrive is unavailable, not the folders from which to chose file. All I can then do is cancel.
And btw, I had tried to get rid of the adware using adw-cleaner which hp had recommended but it did not seem to complete the action and after re-start seems to have vanished. I don't know enough to reconstruct what I did to delete the search engines, I don't think.
View 9 Replies
View Related
Dec 26, 2012
There is an app here that, when opened, causes all AutoPlay optical media settings to revert to "Take No Action."
Is there an AutoPlay setting that can thwart this, in the same manner that a file can be set to READ ONLY?
View 5 Replies
View Related
Jan 2, 2014
Why does Windows Defender want to scan my PC so often? I have it scheduled to scan daily at about 2:30 AM. Sometimes after about 4 hours it says I need to scan.
View 6 Replies
View Related
Jan 13, 2013
I see there is no right click scan for virus with windows defender on windows 8. How to add that functionality?
I found a site that shows how to add it via regedit, but I couldn't get it working on my machine.
View 4 Replies
View Related
Apr 13, 2013
Scanning device is an HP Photosmart All in One HP 2575. i first installed it as an USB device and Windows Fax and Scan recognized it and scanned nicely. I then installed it as a network device and WFS would not recognize it as a scanning device when I unplugged the USB cable. It prints just fine but will not scan.
View 1 Replies
View Related
Sep 15, 2014
windows defender schedule.JPG (88.4 KB)
I am trying to do a windows schedule scan, but when I set it I am getting this (see attached)
View 3 Replies
View Related
Jun 21, 2013
For some odd reason WD keeps telling me I need to do a scan (it's in orange in WD) even though I do a scan everyday via the Task Scheduler. After any kind of scan it resets itself (I don't need to scan, green in color). Some time period later it tells me a scan is needed.
Is there some option that controls how often WD tells you to do a scan?
This started happening about a week or so ago. I don't have anything running on my system that IMO is doing this.
View 2 Replies
View Related
May 27, 2014
I need to email scanned copies of different things. I can scan them ok, but I am having a hard time emailing them. I have tried setting up my gmail account in the scan setting window with no luck. With another program (paper port) I could just drag the file into the email - this won't work in the windows fax and scan program.
View 2 Replies
View Related
Jun 13, 2014
Today I've tried doing a Chkdsk scan on my primary drive. Through the console, I entered this line to start the process on a re-boot 'chkdsk /f /r c:'.
I afterwards left it to do it's work for the next 1 and half hours '6:40-8:10pm', during this time I went to check on the progress of the scan and what I saw was that it was only '10%' into completion, this confused me greatly as previous computers that I have owned would atleast be around 70, or 80% percent completed, so not knowing what to do, I did a cold-boot.
From what I can tell, no visible damage has afflicted said the drive I did the chkdsk scan process on, but I would still very much like to know why my scan is hanging.
View 9 Replies
View Related
Oct 26, 2013
I have windows 8.1 and am trying to do a refresh as I've had some problems. But I keep getting a message that says, "The drive where windows are installed is locked. Unlock the drive and try again." I then did a scan using "SFC/SCANNOW" When it was finished it said that it found some corrupt files but could not fix some of them. So the question is: What is a locked drive and how do you unlock it?
View 9 Replies
View Related
Sep 19, 2013
I have just bought a 4TB external USB 3.0 hard drive. The plan is to copy all of the data from my current internal 2TB drive to the 4TB, then I'm going to crack the case of the external hard drive open, take the drive out, and put it in my PC to replace the 2TB drive that's in there now (which I know will void the warranty). This isn't going to be a boot drive as I have an SSD for that.
I had read that Windows does not support large drives of this size and that it would show up as 2 partitions, so I was prepared to convert the drive to GPT in order to have 1 large partition. However, I connected the drive up to my Windows 8.1 machine and it shows as 1 large partition of 3.63TB, which is about what I expected.
Does this mean I don't have to convert the drive after all? Can I do what I'm planning to do and everything will work fine? Or do I need to convert it to GPT before I copy all of my data over and if so, how do I do that exactly?
View 5 Replies
View Related
Sep 15, 2014
I have a Samsung 530U3C laptop with a 500 GB HDD and an internal 24 GB SanDisk SSD. For some reason, the SSD is suddenly invisible to my system. It does not show up in Disk Management, it does not show up in DiskPart and it does not show up in Device Manager. Nowhere to be seen.
The BIOS has never displayed the SSD drive, so I can't see it there either. I don't know if it's connected with SATA or PCIe. All I know is that it's built in somewhere, and I don't see it if I open the laptop case. I also know that it's not a HDD/SSD hybrid.
However, if I boot up from a recovery USB and start a command prompt, I am able to see the SSD drive in DiskPart. But if I do the same after booting the OS, it's not visible.
Here's some details:
I've installed ExpressCache and Intel Rapid Start Tech to work with the SSD. This is what I did to the SSD:
Cleaned the drive with DiskPartCreate partition msr size=6200 (partition for Intel Rapid Start, 6 GB RAM)Set the partition id=84 (hibernation partition)Installed ExpressCache, which automatically created a partition of the remaining unallocated space.
This setup worked fine for a few days, but somehow the SSD drive is now invisible.
View 4 Replies
View Related
