Why Windows 8 did take 4.5 GB for hardware only ,,, is that too much ? My windows 8 is Single Language edition ... The original one that comes with the laptop . I tried to install Pro edition trail version it says 16 GB ( 15.5 GB Usable)
System Manufacturer/Model Number
MSI GX60 1AC
OS
Windows 8
CPU
AMD A10-4600M APU with Radeon(tm) HD Graphics, 2300 Mhz, 4 Core(s), 4 Logical Processor(s)
Memory
16 GB Installed
Graphics Card(s)
AMD Radeon HD 7660G & ATI Radeon HD 7970M
I built a computer recently (so it's not a 'store-bought system'), installed 16 GB of RAM, but System Information shows only 2.96 GB as usable. I'm using Win 8, 32-bit, with an Intel i3-2120 (3.30 GHz) CPU on an MSI motherboard. Not a gamer, so I have only a low-end GE Force 210 video card.
From what I gather, Windows 8 (32-bit) only allows a certain amount of RAM to be used. Is this correct? If so, did I make a mistake by installing 16 GB, when I could have installed a lesser amount? For example, if Windows 8/32-bit only recognizes (or at least, uses...) something like 3.5 GB---should I have simply stuck in 4 GB?
FYI, I'm happy with my computer, my wife and I can surf just fine (we have cable Internet, with an advertised speed of 15), and I don't really have any complaints. Just trying to educate myself about installed versus usable RAM.
I have Windows 8.1 32-bit installed and have fitted my PC (Dell Inspiron 531) with 4GB RAM.
The system only reports 3.25gb as usable - where has the remainder gone?
Is it the Graphics card (ATI Radeon HD 2600 XT)?
I understand that Windows 8.1 32-bit can utilise a full 4GB of RAM?
Also in the Task Manager, it reports that I have used "2 of 2 slots", however I have 4 RAM slots inside the machine where the RAM is fitted (4 x 1GB fitted).
I built my computer a couple weeks ago and am running windows 8.1. I currently have a 128gb SSD and a 1tb internal hard drive (WD Caviar Blue) I obviously used the ssd to boot windows and currently windows is detecting my 1tb hard drive but it is not usable. I have tried diskpart commands to clean and format and I keep getting the error message "DiskPart has encountered an error: The request could not be performed because of an I/O device error". The hard drive was brand new and cables are fine. This is what everything looks like..
I'm using Windows 8.1 now, but about a year ago, while I was still on Win7, I bought a 3TB Seagate internal hard drive. My motherboard doesn't have UEFI, so I used the DiskWizard utiiltiy from Seagate's website to make the drive look like two drives, one 2TB, the other about 800GB. Now I have my boot partition and several data partitions on the drive, and access to all 3TB of space. Works great on both Win7 and Windows 8.
I just saw an ad for a good deal on a Toshiba 3TB internal drive, but I can't find any indication that Toshiba has software that does the same thing for its drives as DiskWizard does for Seagate drives.
Is there such a utility, either from Toshiba or a third party?
I used HP Pavilion G4-2216TU, 2Gb DDR3 RAM, Intel HD 4000, and Windows 8 Pro 32 bit, x64 processor.
The usable memory only 935 Mb, fewer than hardware-reserved that take 1,1 Gb of memory.
Is that normal ? that hardware-reserved took more memory rather than usable?
I've check the BIOS, no remapping setting that I can use for. can I remapping / reduce those hardware-reserved usage in such other way ?or how can i increase my usable memory close to installed RAM ?
I've not done any change or upgrade since I bought that new laptop, and its seem memory-load is too busy (I've check with the performance-monitor).
My desktop computer (Win 7 Pro 32 bit) has two local printers, both with the share attribute, and is the server on a wireless LAN containing my wife's ASUS tablet (Win 8.1RT). Until recently she could print using the shared printers, but now cannot. The printer sare detected, but on trying to print, an error message says that theserver print spooler service is not running. But it definitely is - I have checked with Admin Tools, checked that it starts automatically, tried stopping and restarting it. The ASUS can still see and open shared files and folders. The printer drivers are up to date on both machines and work perfectly on the server. I am beginning to think that a Win 8 update has changed something?
Although I don't really miss the Classical start Menu any more It's quite useful to have a quick popup of some programs you use from time to time that don't always warrant being either pinned to the desktop or the taskbar also with SUB MENUS where appropriate -- All the tools like WIN-X editor that I've seen don't allow sub menuing or need fixed location toolbars or folders so here's an EASY way to do it - although it's manual so perhaps knowlegable people with some programming skills who know some scripting could easily automate the process.
An Easy way to do this actually exists in WINDOWS itself by the use of a bit of trickery and Custom toolbars -- you don't NEED any Registry hacks etc. Also you can save your created toolbar so you don't need to re-create it or go through the whole process again if you re-install Windows again either.
Taskbar - Pin or Unpin a Folder - Windows 7 Forums Toolbars - How to Use in Windows 7 and Vista - Windows 7 Forums
1) Create a Folder anywhere on your system say on Vol D: and call it My Progs.
2) Create a Custom toolbar (right mouse click on bottom taskbar==>toolbars==>new toolbar
3) Select the folder location to the one you've made D:My Progs.
Now the trick is to POPULATE this folder correctly.
For Items that don't have any sub menus - for example on my system I'll take Winamp.You need to find the FILE LOCATION - easy way to do this is to search in the applications and then RIGHT MOUSE CLICK on the .exe file and then SEND TO DESKTOP (create Short cut).
Now on the DESKTOP RIGHT MOUSE CLICK on the icon and choose COPY.
Go to your folder D:My Progs, chose Paste Short cut. Then delete the desktop icon if you don't want it on your desktop.
Now if you want SUB levels - create a Folder in the My Progs folder and then simply copy the procedure above.
You can do this for as many levels as you want.
For the TOP level items say Office Create a Folder Microsoft Office. As an example I've also added one Classic Games.
If the link is ALREADY a short cut then just past direct into the My Prog folder - you don't need to create a short cut first.
Finally re-arrange it so it appears on the screen at the most convenient place for you.
"Seemples" -- Bye Bye Startisback or any of those 3rd party apps -- I think my method is far more flexible and you can have ANY number of toolbars too.
I've shown two screen shots here with a small test toolbar - Office and Classic Games have lower levels and the other one is the example My Dir containing ONLY short cuts and folders.
Install 8.1 Pro over email, he gets to the HDD selection screen in setup, deletes the old Windows 7 partition, deletes the old 100MB System Reserved partition, creates a new partition as normal
At this point it should have asked him to allow setup to create a new 350MB system reserved partition, but no, it just automatically began installing 8.1
I told him, let it complete install, then check disk management to see if it has created the 350MB partition and this is the screenshot he sent me
why his storage drive is Dynamic, could this be why there was no system reserved partition created on the main drive?
I migrated my hard drive using Paragon which was running Windows 8 a few days ago from my 500GB to my 3TB hard drive. It worked fine for a while however it's now been acting up recently. I noticed that the system reserved partition on my new hard disc (G: ) is only "Active, Primary Partition" and I still have a system reserved partition on my old hard disc (E: ) which is "System, Active, Primary Partition" so I'm guessing it's still somehow tied to my OS (even though I formatted my old hard disc as I want to set up a dual-boot system with Linux Mint), and the fact that whenever I start up my computer it says it's repairing E:.
What to do to make it so the system reserved G: partition is the "System, Active, Primary Partition" and how I can merge/format the E: and F: partitions on my old hard drive after?
I know the little mistake I made with the 3TB drive only being recognised as 2TB.
I have installed dual windows 8 and windows 7 . i did this many times but this time when i open my computer to explore disks then i saw system reserved disk too there? this was never happened to me . so at what condition this happens and is it the fault of the pc .? should i re install windows to avoid this? does it harm my pc if it remains there ?
I'm on Windows 8 64-bit on a Toshiba Satellite L750.
My computer has constantly been a pain and has not once been completely usable. There is always some sort of flaw. I deleted everything and installed Windows 8 last week because it seemed as though only 2gb of my 6gb of ram was being used, and I wanted to installed Win 8.
Currently in the Resource Monitor I have 2 gb in use/free and 4gb of is labelled 'Hardware Reserved' and doesn't appear to do anything.
I have spent the past two hours trying out different methods to get it to work, but none of them did, and on the forums I looked at there seemed to be no real solution and the threads just trail off into unrelated problems.
I really need this 4gb to be active so I can actually use my computer properly and use the full 6gb of ram that came with the laptop. This problem has been around on Windows 7 and still exists after doing a fresh install of Windows 8.
So that is a screen shot of my disk management screen. As you can see, disk0 and disk1 both have system reserved partitions on them.
Disk0 is a SSD that I only want Windows, Office, and possibly my video and photo editing software on it. Disk1 is a 2TB SATA HD that is split into 2 partitions used for programs on 1 and media on the other Disk2 is a 2TB SATA HD that is used just for Media storage, and I'm thinking about adding a partition for backups
What the 25MB partition is on Disk2. I also don't know why I cannot access the system reserved partition on Disk0, and why there is another system reserved partition on Disk1 that I can explore, and contains the boot folders.
How did this happen in the first place? Is there anyway for me to fix this issue without wiping everything? I have done some searching and found quick fixes but haven't found an explanation as to how this happened in the first place.
I also would like to create repair DVDs and a full system image of my C drive, but have not done either of these before.
I have my system reserved partition attached with my personal partition and i have a lot of useful data in it.
Because of it i'm not able to format system reserved at start to avoid boot loader asking me wether you want to choose between windows 8 or the earlier version of windows.
How can I seperate system reserved from my partition .
I was recently messing around with installing Windows 8 on an external USB 3.0 HDD (NOT a flash drive) (How To Install Windows 7 On USB Flash Drive or External Hard Drive), and found website that showed a method for doing so by way of a "NT6 Fast Installer". I tried many times to get it to work and just when I was about to give up it finally succeeded. I rebooted into the external drive (unplugged my internal HDD) and it finished installing successfully. After booting/logging in for the first time I noticed that performance was near-native to what it would be if you ran it from an internal HDD. Games even ran well. But I noticed that there was only 1 partition and no System Reserved, and it appeared that the boot files were located on the C drive.
So my question is, on a regular 8 installation to an internal HDD, how can you delete System Reserved and move the boot files to the C drive? Is there any advantage in doing so (or disadvantages)? I just figured that with a C drive and a System Reserved that makes 2 primary partitions out of an available 4 being taken up, by having everthing on C you would only have 1 primary partition and 8 would still work. The steps listed at the above website are meant for 7 and Vista, but I tested them to the tee and they worked without modification on 8. I just had to flag the partition as active/bootable before booting into it for the first time, or else it would throw an error. I know alot of people think that it cant be done or is hard to do, but it can. But that's not what I'm trying to prove. It essentially amounts to being almost the same thing, if not exactly the same, as Windows To Go, except that you're installing via an unofficial method since the official installer wont allow installation to a USB HDD.
I have 16GB of unallocated space in front of System Reserved. I was wondering if there is a way to move the System Reserved to the front. I've used GParted before and I'm guessing I am going to have to make a backup of the C drive and then move it around. (and I know, only 10MB free on C drive. )
Windows 8.1 reserved partition will not optimize on SSD. Even if you try to run it manually. Have the latest firmware update for the SSD and Trim in enabled.
My Inspiron 7520 laptop arrived today and I've been trying to get the various Intel features to work on it. I've got the rapid storage (ssd cache drive) set up but I think I may have broken the rapid start feature of it along the way. Now when I start the laptop I get an error saying 'your system does not appear to have intel rapid start enabled'. When entering my BIOS, the intel Rapid Start Technology is greyed out and I can't click it.
I thought it may have been because i set all available space on my SSD to the rapid storage feature. So I changed it and made it so that it only takes about 20gb (of the 32gb) and tried to follow the intel guide of setting up the rapid start feature [URL] ....., however I received an error on the part where it said 'setid=84 override' which said my partition it was not of the right type or format. So after reading another guide online it said to try using the partition type of MSR instead of Primary. So I tried that and now the partition is hidden from disk management and I can't seem to delete it from diskpart either.
Last night clean installed windows 7 pro and noticed that system reserved partition is created with 100MB. Then upgrade it to windows 8 pro and finally updated it to windows 8.1 pro.
After complete installation of windows 8.1 pro and noticed in computer management that still system reserved partition is 100MB. whereas if in case i did clean installation of windows 8 pro then system reserved partition will be 350MB.
My HDD capacity is 2TB and i have nearly 1TB of unallocated space. C drive is 200GB
Therefore i would like to increase my system reserved partition from 100MB to 350MB.
How to increase system reserved partition from 100MB to 350MB with step by step ?
What is the advantages of allowing 350MB to system reserved partition in windows 8.1 pro?
When I got this computer, I restored my files from my Windows 7 OS to Windows 8 using my Carbonite back up. However, none of my Wordpad documents are usable now.
How do I convert my old Wordpad files to the Win 8 OS? Should I be asking the Carbonite people? Or is there a program that will do this for me?
I am dual booting my dell e6420, 8 gb ram. I have windows 8 on my HD and windows 8 on my ssd. Since I do live audio work, I keep the ssd system super clean. It doesn't get on the net, etc.
Recently windows prompted me to upgrade my hd os from 8 to 8.1, which I did. Since then, every few minutes, I get a popup saying I have Low disk space on my system reserved partition. It's 300 mb, which seems larger than most, but there is indeed only 1 mb free. But of course when I run disk cleanup, there is nothing that can be deleted!
It's now popping up about every 2 minutes. Very annoying.
I have 2 os's, do I even need the srp? But why on earth would it run out of memory? Maybe because of the dual boot? But I'd think they'd account for that.
should I expand the volume? That just seemed a little dangerous, and hopefully unnecessary.
I want to install Windows 8 Pro onto the second partition of my laptop that already has W7 Pro installed. What are the correct settings for the second partition(simple, active, primary,etc) so that the existing System Reserved partition used by W7 won't get clobbered? Is this even possible?
I'm trying to upgrade from Windows 7 to Windows 8 (and then 8.1) on a laptop with a 240 GB SSD. When I run setup, it loads, but then says Windows can't be installed because there isn't enough free space on the system reserved partition. My reserved partition is only 32 MB (I believe it was shrunk from 100 MB when I swapped the SSD in).
Is there any way I can resize the reserved partition and install Windows 8, or will I need to totally reformat the drive and repartition? Don't want to reinstall all my software .....
I have a custom PC I built and I was running 8.1 on it. I have to drives a 120gb ssd that had windows on it and I have a 1 TB that had the 350mb system reserved partition and 2 other partitions I had for data and a boatload of free space. I wanted to try and install Linux Ubuntu on the 1tb hard drive. I did a custom install on it because I didn't want it to delete my existing partitions so in the install I made 2 partitions for Ubuntu, after I installed it my 2 data partitions are gone and I don't know what happened with the 350mb system reserved partition.
On that disk now is the 2 Linux partitions and a 150mb partition that I can't tell what it is. But now I can't boot into windows, even when I go from bios. My question is in that system reserved partition is that where the bootmgr is? Because I did nothing with the ssd where windows is and I get a no operating system error when I try to boot off it. How I can fix that disk if the system reserved partition isn't on it.
From many days i was trying to make backup but i was not able to make than i found that my Master File Table it corrupt which located in System Reserved.
Than i thought of Re-Installing Windows than i Formatted System Reserved Drive & My C Drive.Now I am not even able to Install Windows.
Error Shown by the Windows Setup - Setup was unable to create a new system partition or locate an existing system partition.
I tried restoring my computer using Easeus backup, but an error occurred during the restoration process. I've managed to fix it by doing diskpart /fixmbr and then using the windows dvd automated repair, however, what I ended up with is this:
So there are now two visible drives on my PC - C and Q (system reserved), and it doesn't see the data drive.
What I want to do is to make the data drive visible, and merge the C and Q drives into one (or make Q invisible), if that is possible. So, how do I do that?
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
I used to have System Reserved on separate partion to C: but on my last fresh re-install, I decided to make C: and System Reserved in one partition. Here's what shows on Disk Management:
My question is, which is better. System Reserved on the same partition with C: or on a separate partition?
I downloaded the drivers for windows 7 x64bit for the SD card reader in my system. I have installed Windows 8.1 Pro x64.
I had the same issue with Windows 8 and now that I have settled on 8.1 need to fix my card reader. Funny thing is that the drivers from Microsoft load (2006) and all devices look fine in Device Manager.
Even after installing the link from Acer and even searching around and getting other ones from Lenovo, HP still no go.
