Hardware Drivers :: New Computer Broke After Interrupting Update
Nov 30, 2013
I got my new comp yesterday and it was working fine but during critical updates the power cord came unplugged and since then my computer won't work. When I press the power button it turns on for a second or two, then immediately turns off, then just continues doing this in an endless loop restart cycle. I cannot access bios and my monitor does not turn on during the few seconds that the computer has power. My power cord does not work in my current old desktop and the power cord from my old desktop does not work in my new pc..
I have tried inserting the windows 8 disc, but computer doesn't stay on long enough to do anything. I've also pressed f2, f8, f10, f12 all of those and nothing works or causes the computer to respond.
View 2 Replies
ADVERTISEMENT
May 17, 2014
Back on the 9th I installed the Windows 8.1 Update 1 for my laptop (HP Envy m6-1206TX), which - to the best of my understanding - has broken my computer. Neither my computer nor WhoCrashed seems to think there's a problem, so I don't have anything better than a description for this.
After the initial mandatory restart and every restart since then, I am able to log in normally. However, within a few minutes my taskbar and desktop will both freeze and then disappear. Any windows that are open will cycle between which is the active window making them almost but not entirely unusable, and the screen will flash. After a couple of minutes of this, the flashing will increase in speed and the computer will rapidly cycle between
View 2 Replies
View Related
Feb 8, 2013
I had a problem where I was running UEFI with secure boot disabled and dual booting with Linux Mint which is UEFI compliant. Mint had installed Grub, Mint's boot manager but I don't like Grub so i installed rEFInd. Unlike Grub rEFInd has support for UEFI and should have worked better as a boot manager. But it gave me problems too. So I had Grub and rEFInd both installed. I could boot to both Mint and Windows but the boot managers, both Grub or rEFInd, would not show at startup like they are supposed to.
I had to boot the PC, then hit Escape getting into my options menu built into the system, hit F9 to get a list of boot options where i could then choose to boot from hard drive, cd rom, usb etc. rEFInd was in this list. Only after choosing rEFInd from here, was I able to open rEFInd and choose Windows or Mint. This is way too many steps to boot into an OS, so i thought i'd try to use the system repair disk to repair my master boot record or the EFI data that the system uses at boot under UEFI. I forgot that i had to run some additional commands under command prompt and just ran automatic repair from Advanced instead.
At this time Windows had no trouble working at all with secure boot enabled if I really needed windows to use secure boot.
It said it found but could not fix the errors. Suddenly, Windows would not boot even with secure boot enabled. I reran the tool 3 times and it didn't work so i wiped the drive and reinstalled Windows from a clean state. I really did not have errors on the system to begin with accept that the system was trying to access my boot managers in an odd manner.. although i could get everything to work.
The automatic repair option should not have made things worse, even breaking my secure boot but it did.
My point of this is to show that the repair disk tools and how they play with the EFI boot tools is buggy and it can break your system even if there is nothing wrong with Windows and it's ability to boot under secure boot. Don't trust the Repair Disk tool folks. Don't trust UEFI. Don't trust Secure Boot. Be smart. Install a clean system under Legacy Bios mode with UEFI and secure boot disabled.
View 3 Replies
View Related
Mar 14, 2013
I was reading that your Intel motherboard drivers should be updated. I watched the video and it seemed so easy. It said you can run it even if your mobo is not Intel with no harm done. The target to do so is below.
I am only an average pc user. Is updating the mobo drivers as important as was being stressed and is it a rather fool proof procedure.
|MG| Intel Chipset Device Software (Formerly Chipset Software Installation Utility) 9.3.0.1026 Download
View 1 Replies
View Related
Oct 29, 2013
While updating my computer i accidentally left the charger out. So it shut down towards the end of the update and now when i restart my computer i'll only the see the HP start-up/loading screen and then the screen just turns black and all i see is my cursor. I didn't get any Windows installation cd with my computer and now what to do.
View 9 Replies
View Related
Apr 28, 2014
I am going to be restoring a Windows 8 computer to factory original, then upgrading it to 8.1. Would it be better, after the restore, to let Windows Update do all the original Windows 8 updates, then go to the Windows Store and upgrade to 8.1, or should I go to the Store right after the restoration, get 8.1, and then do Windows updates?
View 7 Replies
View Related
Dec 26, 2012
I have a 2TB Western Digital My Book Essentials, it's filled with tons of old photos, movies, docs, games, and I'm scared to think of what else. The SATA to USB connector broke on it, so I took the drive apart and put it inside my computer. I opened up device manager because it wasn't showing up automatically and the 2TB is showing up as unallocated, I'm freaking out now because I'm scared the data was somehow deleted.What do I do?
edit: I realize also this isn't directly related to Windows 8 (besides the fact it's the OS I'm on), but I don't know where else to post it. I'd also like to say that I had a really deep feeling the drive was going to break continually for about two weeks before it happened, so if you have a similar feeling about something, don't ignore it!
View 9 Replies
View Related
Jan 18, 2014
After upgrading a Dell XPS One using both Intel HD 4000 and nVidia 640M graphics, the computer takes 5 minutes to restart. The restart screen immediately shows up after hitting the restart button. Then the screen goes black for 5 minutes. Afterwards the Dell logo shows up and everything starts fine from there. I don't understand why the monitor stays black for 5 minutes before restarting.
View 4 Replies
View Related
Jan 27, 2014
I want to upgrade a computer from Windows 8 to 8.1 but I have a very low download allocation (2GB/month) at that computer. I would like to download the upgrade on another computer (a Mac) that has a much higher download allowance and then transfer that to the computer I need to update. Is this at all possible?
View 1 Replies
View Related
Nov 16, 2013
I'm using Windows 8. When I'm trying to update my Qualcomm Atheros AR9287 driver, it just tells me that the newest driver is already installed, which is not true. I downloaded and unpacked the driver, but even if I navigate there, Windows 8 will not recognize that driver and just tell me that the newest is installed, effectivly blocking any driver update.
I tried to delete the old drivers manually from system32, but he still won't recognize the new one. If I deinstall the drivers via manager, the whole adapter disappears; when checking for changed hardware, he will reappear and instantly reinstall the old driver, even if it has been deleted from system32 (no idea where he gets the old file from).
View 2 Replies
View Related
Dec 31, 2013
I have a laptop that's only about 5 months old and runs Windows 8. When I had to pack it up to go, I went to shut it down, and it started doing the windows update. I closed the laptop, packed it up, and left. When I start it back up, I see a screen with two options: Troubleshoot and Power off your PC. When I click trouble shoot, this is what I see:
Refresh your PC, and Reset your PC, Advanced options.
When I click refresh my PC, it says "The drive where Windows is installed is locked. Unlock the drive and try again.
When I click reset, it says, "Unable to reset PC. A required drive partition is missing."
When I click advanced options, this is the screen : [URL] ......
The four options are: System Restore System Image Recovery Automatic Repair Command Prompt
When I click System restore, it says I need to restart the PC, and select an OS and then select system restore, but I have no clue how to do that.
SIR says "The system cannot find the file specified (0x80070002)
Auto Repair says that it cannot fix my PC. No reason why.
View 13 Replies
View Related
Dec 27, 2013
I just purchased this Laptop yesterday, was installing programs and updates. The updates finished installing, asked me to restart the PC which I didn't do right away because I was installing programs. One of the programs asked me to reboot into safe mode so I did. When the PC rebooted, it said the updates were installed 100% but then says SOMETHING ALONG THE LINES OF "Updates failed...reverting changes". This loop as been going on for hours now.
I have had success in getting into the BIOS by pressing F12 upon startup. I tried changing the boot order to boot from my bootable startup repair DVD but it didn't work!
View 6 Replies
View Related
Apr 29, 2014
I am trying to update my system to the new Windows 8. I am already operating on the old one, so the update should be free. My computer will not load the store to allow me to update my software.
View 2 Replies
View Related
Oct 7, 2013
I tried to install more RAM, but after I put the sticks in, System information told me only 4GB of the 12 total GB were usable. My setup was two 2GB sticks in ports 1 and 2 and four 4GB sticks 3 and 4. I then switched it around and put the two 4GB sticks in ports 1 and 2, and the two 2GB sticks in 3 and 4. After this 8GB of the 12 were usable. Finally I tried putting the 4GB sticks in ports 1 and 3 and the 2GB sticks in ports 2 and 4 and vice versa.
RAM Sticks
4GB - Newegg.ca - CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMX4GX3M2A1600C9
8GB - Newegg.ca - Kingston HyperX Blu 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model KHX1600C9D3B1K2/8GX
MOBO - Newegg.ca - ASUS P7P55D Deluxe LGA 1156 Intel P55 ATX Intel Motherboard
View 5 Replies
View Related
Jan 19, 2013
DVD drive not recognize by windows-8 after update
i installed WINDOWS-8 RP 64bit for trail on DG41RQ mobo (as well as on other PC (DG31PR) where there is no problem).
all was well till i updated the intel chipset driver (Intel Chipset Device Software version 9.1.2.1008)
and the BIOS version (to RQG4110H.86A.0017.EB)
now the system doesn't recognize my LG DVD drive (HL-DT-ST DVD-RAM GH22NP20) , (also in device manger and also in SAFE MODE) my BIOS dose recognize it and i CAN boot a live Win-XP from it.
i tried to roll back the IDE intel controllers drivers, but no change.
i have an IDE HDD as master, and the DVD Drive as SLAVE (recognized as such by BIOS).
my UEFI is desabled in BIOS (i don't know what it is actually).
(i have Activation Key (PRO) but i want to make sure all is well before activation)
View 6 Replies
View Related
Oct 23, 2013
Since a few years i'm the happy owner of an Asrock ION 330 HT PC. I use it for that purpose, Home Theatre PC. When i bought it, it came with Windows 7 installed, and a working IR remote control (Media Center green button type of remote).
I updated Windows 7 to Windows 8, with everything working fine. However, since the update to Windows 8.1, my IR Remote stopped working. Device-manager now describes it as an 'unknown device'. When I have device manager search for updated drivers it says :
'A driver was found for this device, but an error occured during installation.
Nuvoton W836x7HG CIR Device Driver
This action requires an interactive Windows-computer.'
Microsoft support redirects me to Asrock support for updated drivers.
View 1 Replies
View Related
Jun 23, 2014
When I search for updates with windows update it finds the drivers I want but it gives me an error message whenever I try to install them.
I already tried downloading the latest windows update (when I install it, it says the update was succesful and asks me to restart, but when I search again after restarting the update shows up again and lets me install it again).
I also tried deleting and renaming my software distribution folder and using the windows troubleshooting program.
Overall I'm not really too fussed about most of the things it's trying to install apart from the drivers for the wireless reciever for my xbox controller as it won't work without them. When I try to install the driver files through device manager it gives me this error message
my main reason for mentioning the windows update problem is that I assume the problems are linked as the wireless reciever works perfectly on my laptop. Up to about a week ago it also worked perfectly on this computer using the same usb port that it uses now.
As you can see, on the 19th, it suddenly began to say "NULL DRIVER". I checked my system restore and it tells me that I installed a windows update on that day just before it suddenly stopped working. I tried reverting back to this restore point (before the update) and nothing had changed, the device still would not work.
View 9 Replies
View Related
Jun 21, 2014
I would like to delete obsolete drivers from the "update device driver" screen in the device manager. More specifically form the "I want to choose from a list of device drivers on my computer" screen. How to do this?
Attached a printscreen :
View 1 Replies
View Related
Dec 16, 2013
This is my motherboard: Motherboards - MAXIMUS VI FORMULA
I am trying to update the BIOS, but don't know how. What is the easiest method to update the BIOS?
View 8 Replies
View Related
May 13, 2013
Each time I attempt to run Blue Stacks I receive and error msg to upgrade video drivers. I have updated from the Dell website, but continue to receive the error. Any success running BS on an XT2?
View 1 Replies
View Related
May 17, 2013
Since refreshing win 8 my DVD drive doesn't appear in 'computer' and doesn't boot from the win 8 disk. The green light on the drive flickers and you can hear the drive reading the disk.
View 3 Replies
View Related
Jul 3, 2013
Installed new usb keyboard, shows as HID Keyboard Device in device manager, but there is no power management tab. How do I allow the keyboard to wake the computer?
View 3 Replies
View Related
Feb 28, 2013
I have a TDK 16GB usb pen drive that shows in Device Manager when inserted but not in Computer. It does sometimes appear but very rarely. I have updated all driver via Device manager an they are fine.
View 4 Replies
View Related
Jul 15, 2013
When startup pc (black screen) massage displayed" Please insert correct disk" message exact forgot. Next a few second this is massage displayed:"Please floppy disk insert to drive A" again massage exact forgot.
Will be updated via USB BIOS . What should I do to prepare a USB?
View 7 Replies
View Related
May 20, 2013
So I had to reinstall Windows 8 on my PC, and as usual i install Drivers and such first. Normally it worked, now after i restart the Computer to finish the Driver Updates, i get Black Screen after Windows 8 loading Screen.
View 3 Replies
View Related
Dec 15, 2013
I recently switched my pc from 2 AMD cards to 2 Nvidia cards, when i was preparing to install the 2 cards, i shut down my computer, during the shutdown it asked me to update and shutdown win 8 which i did. ever since i did that my audio devices are not detecting.. nothing i do is working.
When i use my plug and play speakers, they are not recognized... let me rephrase.. in the playback devices menu they show up as "Speakers" as they always have, then quickly disappear, then show up again, then disappear again, then back and forth over and over and over again..... i tried uninstalling my audio drivers and reinstalling. this did not work. i can get sound with the speakers, by just pluggin them into my TV, but i cant control the audio or the 5.1 surround from the tv, it just shows them as stereo...
Asus Sabretooh 990 fx R2
AMD 4.3 vishera FX 8 core
GTX 780Ti (primary)
GTX 480 Superclocked (dedicated physx)
850 modular psu
16GB GDDR3 g.skill
i never had this problem until A) new cards, and B) installed the win 8 update... But i rolled my computer back to a date before that update, and then turned updates off in case that was it..
i've also tried installing drivers directly from realtek, directly from my motherboard website. i've uninstalled and reinstalled, and stopped windows from auto installing during my realtek installs on the drivers...
just cant figure out why it flickers like that, the speakers work fine in other devices (e.g the tv).
Here is a screenshot of when i try to download drivers, i get an error 0xE0000247....
And a pic of my device manger
View 2 Replies
View Related
Aug 20, 2013
I am currently running Windows 8 64 bit and when I go to "My Computer" it is only showing my C: drive. I know my other drives (internal, external and dvd) are working because I can enter the directory name (ie. H: or E:) into the address bar and the content appears. Is there any way to fix this problem so that they show up in "My Computer"?
View 9 Replies
View Related
Jul 15, 2013
When I plug one of my flash drives into my USB port I get this message F:/is not accessible The request could not be performed because of an I/O device error. I tried a few of the methods I found on the Net but nothing worked.
View 2 Replies
View Related
Aug 26, 2014
I'm trying to connect my Samsung Galaxy S III to my new Asus LX302L via bluetooth.Both have bluetooth vers. 4 and I have successfully connected other units to my phone earlier but now it doesn't work.
I can "see" both units and they are linked together via password but that's it. After I linked them together, the status information on the computer says "Not connectet" for the phone. The same information is the phone saying about the computer.All drivers are up to date.
I want to use my phone as a remote using "Unified remote" and I also want to play music via the phone out to the computer speakers. This I have been able to do with my old computer (windows 7) but now it doesn't work.
View 9 Replies
View Related
Aug 4, 2014
Does making a new drive by shrinking volume of c: drive and making a volume of the new drive slow down your computer? Does using space on the new drive slow down your computer either?
View 5 Replies
View Related
Feb 9, 2014
I'm having an issue where if my USB devices are plugged in when i start my computer they are fine. but if i try to plug in a thumbdrive after it's already been turned on it won't recognize it. nothing.
Just Ran the SFC /scannow and i don't know what to make of it. it is attach The Attached file has the SFC details. not sure what to make of it.
Running
Windows 8.1 x64
Gygabyte: z68a-d3h-b3
(will attach more if needed.)
View 1 Replies
View Related
