Started using my freshly installed Windows 8.1 Pro this week...When i go to a file (any filetype...i tried like 10..) and click "choose default program..." in the context menu, the following error message will always come up:
Sure i can go to Config panel > Select default programs etc.But this is odd... since i am 100% confident it used to work fine before.I already did a 'sfc /scannow' checkup with an original 8.1 Pro x64 image but it says integrity is completely fine.
Could it be a random piece of software i uninstalled which was perhaps freeware and did not state it was Windows 8 compatible, leaving a cluttered registry key which is affecting this command from my context menu?
I am unable to run install program for realplaver 16. I get the error message "This app can't run on your PC" However the Windows Eight compatible website says that it is!
I just did a fresh install of 8.1 pro on my computer with an SSD. When i click the start button and use the apps window(not metro) to launch desktop programs they load extremely slow. The start menu doesn't even close on its own when i click to launch a program either i have to manually close it then a few seconds later the program will launch. When i open the program from explorer it loads instantly but for whatever reason doing anything through the new start menu is extremely slow.
I am running a Win 7 OS on an SSD and I have some programs installed on a different hard drive. And I want to move this program files folder on the same hard drive but different partition. Is it possible to do this without breaking the program links?
I recently built a rig (spec below) and originally installed windows 7.
I decided today I would install windows 8.1 as I get it for free from my university. I booted the installation disc in EFI mode, wiped the SSD and deleted all partitions. I let windows create the partitions it needs and proceeded to install.
The installation got up to 2% in expanding windows files and showed error:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code: 0x800070570.
I rebooted and tried again several times and the same thing happened whether I chose EFI cd boot or not.
I then reinstalled windows 7 without any issues, and downloaded an 8.1 pro disc image from mydigitallife. The installation got a little further into expanding windows files, but the same error came up again.
Ive been reading that it may be a memory issue so i'm the process of reinstalling windows 7 and running memtest86+, but I doubt this is the case as its a mew system and windows 7 has no trouble
Host OS: Windows 7 Ultimate x64 on SSD system disk. PC Specs: Intel Core i7 3770K on ASRock Z77 OC Formula with 16GB DDR3, GTX470 VirtualBox version: 4.3.12 r93733 with Extension Pack 4.3.12 r93733.
I've had a Windows 8.1 Pro x64 VM running on VBox 4.3 for a few days now with no issues at all.
However, this morning, the VM refused to boot saying VT-x was not enabled.
I checked via the VM settings but the whole "Acceleration" pane was disabled and not accessible. I was not able to resolve the issue even after rebooting my PC and explicitly enabling Intel Virtualization in the PC BIOS (it was on AUTO before - I set it to ENABLE).
I have since several times removed the VM completely and attempted to reinstall.
Every time, the VM hangs on the Windows 8 logo screen on install and then crashes with the Error 0x000000C4.
As found on VirtualBox community forums and on other sites, I have tried the SETEXTRADATA command via command prompt running as administrator, and have confirmed that the .vbox file has been changed and the string ExtraDataItem name="VBoxInternal/CPUM/CMPXCHG16B" value="1" appended in the <ExtraData> section.
However the VM still refuses to boot or reinstall. I have Ubuntu, Fedora and ZorinOS VM's all working perfectly.
The only change to my system that took place in the interim was that I installed Comodo Free Firewall last night. Seeing the problems I have been having with the VM since this morning, I uninstalled Comodo and rebooted thinking it might have something to do with my problems, but still no joy.
I am also uploading my .VBOX files before and after to show the changes that have been made by the SETEXTRADATA command.
I can't install .NET Framework 3.5 no matter what I do. I tried downloading it and in the midway get the error 0x800f0906. I tried installing through DISM but that didn't work either. It always stops at 65.8 %.
Created a bootable flash drive using Universal USB Installer from WindowsBlue-ClientwithApps-64bit-English-X1899605.iso. Create completed successfully with 452MB of free space left on a 4GB flash drive.
During install, I get this about 10 seconds after the ugly fish appears during install.
I'll burn a DVD and try it but much prefer a flash drive for install.
I am writing because I wanted to install windows 8 on my pc ... but since it is a Pentium 4 with a 3.2...motherboard ASUS P4C800, motherboard only supports Socket 478 and Socket 478 with no pentium 4 supports specific XD "no eXecute".. there is no way to bypass this control?
Downloaded from Windows.com. Installed and upon final reboot got this error. "The OS couldn't be loaded because the kernal is missing or contains errors." Suggests doing a repair??? by inserting the Disk. Don't have disk, it was a download. What to do next? Is the main file on the HD that I could burn to DVD or??
When I search for updates with windows update it finds the drivers I want but it gives me an error message whenever I try to install them.
I already tried downloading the latest windows update (when I install it, it says the update was succesful and asks me to restart, but when I search again after restarting the update shows up again and lets me install it again).
I also tried deleting and renaming my software distribution folder and using the windows troubleshooting program.
Overall I'm not really too fussed about most of the things it's trying to install apart from the drivers for the wireless reciever for my xbox controller as it won't work without them. When I try to install the driver files through device manager it gives me this error message
my main reason for mentioning the windows update problem is that I assume the problems are linked as the wireless reciever works perfectly on my laptop. Up to about a week ago it also worked perfectly on this computer using the same usb port that it uses now.
As you can see, on the 19th, it suddenly began to say "NULL DRIVER". I checked my system restore and it tells me that I installed a windows update on that day just before it suddenly stopped working. I tried reverting back to this restore point (before the update) and nothing had changed, the device still would not work.
I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc. I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive. I got the same error code with DVD disc that I get with USB Flash drive. I formatted HD during beginning of install so there is no OS on laptop...
Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.
I ran a MemTest86 and did a HD Test from BIOS and both passed.
8.1 install error 0xC1900101-0x40019 and 0x80070652 and Windows 8.1 installation failed and reverted back to Windows 8.0
I'm lucky the computer even came back to life. I have an Intel HD Graphics 4000 video card, so the review from ADRStudio replied on February 15, 2014 on page 18
could address this problem but I'm not so sure. I can't find the Win 8.1 drivers at HP for my machine, they only offer Windows 7 or 8.
I've been reading Latest Win 8.1 ISO "Breaks" System Image Functionality
and on my dual boot laptop with Win 7, this may be a fatal error when trying to install Win 8.1 because 8.1 adds another System partition and kills off the one I had been using.
how widespread & long-going it is, I'm gonna stick to Win 8.0 for now.
So my windows 8.1 installation became corrupted, so I backed up data and did a clean install after deleting all partitions.
After the install on the first boot, right after the process of "installing apps", it showed an error message saying an error occurred causing windows to restart, and created a memory.dmp file.
I just want to make sure this installation is stable before continuing to update to 8.1, especially after my previous issues. There are also some errors in the event log that I don't understand.
The errors came after install of Windows 8, as that was the key I had.
Windows failed to download and install 92 updates with error code 80248007
I upgraded my HP windows 7 pre-installed to windows 8.01. I tried ubuntu 13 using wubi then i removed it but once I switch on my pc , I get windows 8.01 then ubunto( which fails to boot due to windows boot error) I kept booting windows 8.01 that was working fine till I installed ubuntu 14.04 after I left an allocated partition for it to install. I made manual partition using the free space and installed ububtu. After installation, I did not find grub and I got black screen: windows fails to start ; oxc000001. after I used boot repair cd, I fixed my ubuntu and brought back grub. now the situation is I find grub 2 with ubuntu that I can access but the windows 8.01 load is not working. All my files are in windows. how to get windows 8.01 back to boot? I tried repair disc but it did not fix it stating disk error and partition drive missing.
So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it.
I just reinstalled Windows and tried installing the updates again, but same thing. I cannot install any update at all.
I got a 4tb sshd, plugged into a pc and activated it and split into 2 partitions, 1tb for windows and 3tb for other stuff. Tried installing windows on the 1tb partition and it gives me error saying they couldn't install windows on this location, here's more info: 0x80300002.
What does this error code mean?
Btw my old drive failed after a bad day I pushed power button while it was slowly about to give an error after I pushed power button the night before that it was taking really long to turn off.
I am unable to install the drivers for my NIC's getting the error 'Invalid data as shown in the images below'.
It has previously been working fine on all adapters but I needed to uninstall the network cards as HyperV was throwing up an error when creating virtual switches which may have caused this?
PS C:UsersJGAdmin> get-netadapter
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed ---- -------------------- ------- ------ ---------- --------- Ethernet 40 Intel(R) PRO/1000 PT Dual Port Netwo... 117 Not Present 0 bps Ethernet 39 Broadcom BCM5709C NetXtreme II Gig...#2 132 Not Present 0 bps Ethernet 38 Intel(R) PRO/1000 PT Dual Port Net...#2 131 Not Present 0 bps Ethernet 37 Broadcom BCM5709C NetXtreme II Gi...#50 130 00-26-55-1A-A8-4A 0 bps Ethernet 34 Intel(R) PRO/1000 PT Dual Port Net...#3 127 00-1F-29-56-C2-51 0 bps Ethernet 33 Intel(R) PRO/1000 PT Dual Port Net...#4 126 00-1F-29-56-C2-50 0 bps vEthernet (VLAN3 (Desk... Hyper-V Virtual Ethernet Adapter #3 71 Not Present 00-1F-29-56-C2-51 0 bps vEthernet (VLAN2 (Serv... Hyper-V Virtual Ethernet Adapter #2 64 Up E8-39-35-14-23-2C 10 Gbps
I have tried numerous drivers with no luck all getting the same error.
The box has alot of data on it so I would rather not have to do a clean install.
I bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:
Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).
Here's how I prepared to install:
1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD) 2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)
I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.
I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?