Created a bootable flash drive using Universal USB Installer from WindowsBlue-ClientwithApps-64bit-English-X1899605.iso. Create completed successfully with 452MB of free space left on a 4GB flash drive.
During install, I get this about 10 seconds after the ugly fish appears during install.
I'll burn a DVD and try it but much prefer a flash drive for install.
Host OS: Windows 7 Ultimate x64 on SSD system disk. PC Specs: Intel Core i7 3770K on ASRock Z77 OC Formula with 16GB DDR3, GTX470 VirtualBox version: 4.3.12 r93733 with Extension Pack 4.3.12 r93733.
I've had a Windows 8.1 Pro x64 VM running on VBox 4.3 for a few days now with no issues at all.
However, this morning, the VM refused to boot saying VT-x was not enabled.
I checked via the VM settings but the whole "Acceleration" pane was disabled and not accessible. I was not able to resolve the issue even after rebooting my PC and explicitly enabling Intel Virtualization in the PC BIOS (it was on AUTO before - I set it to ENABLE).
I have since several times removed the VM completely and attempted to reinstall.
Every time, the VM hangs on the Windows 8 logo screen on install and then crashes with the Error 0x000000C4.
As found on VirtualBox community forums and on other sites, I have tried the SETEXTRADATA command via command prompt running as administrator, and have confirmed that the .vbox file has been changed and the string ExtraDataItem name="VBoxInternal/CPUM/CMPXCHG16B" value="1" appended in the <ExtraData> section.
However the VM still refuses to boot or reinstall. I have Ubuntu, Fedora and ZorinOS VM's all working perfectly.
The only change to my system that took place in the interim was that I installed Comodo Free Firewall last night. Seeing the problems I have been having with the VM since this morning, I uninstalled Comodo and rebooted thinking it might have something to do with my problems, but still no joy.
I am also uploading my .VBOX files before and after to show the changes that have been made by the SETEXTRADATA command.
I recently built a rig (spec below) and originally installed windows 7.
I decided today I would install windows 8.1 as I get it for free from my university. I booted the installation disc in EFI mode, wiped the SSD and deleted all partitions. I let windows create the partitions it needs and proceeded to install.
The installation got up to 2% in expanding windows files and showed error:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code: 0x800070570.
I rebooted and tried again several times and the same thing happened whether I chose EFI cd boot or not.
I then reinstalled windows 7 without any issues, and downloaded an 8.1 pro disc image from mydigitallife. The installation got a little further into expanding windows files, but the same error came up again.
Ive been reading that it may be a memory issue so i'm the process of reinstalling windows 7 and running memtest86+, but I doubt this is the case as its a mew system and windows 7 has no trouble
System Spec:
Mobo: Asus P8 Z77-V LX2
CPU: Intel i7 2600k (no overclock)
RAM: Crucial 8GB DDR3 1600mhz (one module)
GPU: GeForce 650Ti
Downloaded from Windows.com. Installed and upon final reboot got this error. "The OS couldn't be loaded because the kernal is missing or contains errors." Suggests doing a repair??? by inserting the Disk. Don't have disk, it was a download. What to do next? Is the main file on the HD that I could burn to DVD or??
View 6 Replies View RelatedWhile setting up a new system tried to install win 8.1 and got the IRQL screen.
View 3 Replies View RelatedI am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc. I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive. I got the same error code with DVD disc that I get with USB Flash drive. I formatted HD during beginning of install so there is no OS on laptop...
Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.
I ran a MemTest86 and did a HD Test from BIOS and both passed.
8.1 install error 0xC1900101-0x40019 and 0x80070652 and Windows 8.1 installation failed and reverted back to Windows 8.0
I'm lucky the computer even came back to life. I have an Intel HD Graphics 4000 video card, so the review from ADRStudio replied on February 15, 2014 on page 18
could address this problem but I'm not so sure. I can't find the Win 8.1 drivers at HP for my machine, they only offer Windows 7 or 8.
I've been reading Latest Win 8.1 ISO "Breaks" System Image Functionality
and on my dual boot laptop with Win 7, this may be a fatal error when trying to install Win 8.1 because 8.1 adds another System partition and kills off the one I had been using.
how widespread & long-going it is, I'm gonna stick to Win 8.0 for now.
So my windows 8.1 installation became corrupted, so I backed up data and did a clean install after deleting all partitions.
After the install on the first boot, right after the process of "installing apps", it showed an error message saying an error occurred causing windows to restart, and created a memory.dmp file.
I just want to make sure this installation is stable before continuing to update to 8.1, especially after my previous issues. There are also some errors in the event log that I don't understand.
The errors came after install of Windows 8, as that was the key I had.
Windows failed to download and install 92 updates with error code 80248007
I upgraded my HP windows 7 pre-installed to windows 8.01. I tried ubuntu 13 using wubi then i removed it but once I switch on my pc , I get windows 8.01 then ubunto( which fails to boot due to windows boot error) I kept booting windows 8.01 that was working fine till I installed ubuntu 14.04 after I left an allocated partition for it to install. I made manual partition using the free space and installed ububtu. After installation, I did not find grub and I got black screen: windows fails to start ; oxc000001. after I used boot repair cd, I fixed my ubuntu and brought back grub. now the situation is I find grub 2 with ubuntu that I can access but the windows 8.01 load is not working. All my files are in windows. how to get windows 8.01 back to boot? I tried repair disc but it did not fix it stating disk error and partition drive missing.
View 4 Replies View RelatedI tried doing the steps found in this guide:
DISM - Fixing Component Store Corruption in Windows 8
but option 1 failed
i tried option 2 and it also failed this is what i got on the 3rd command:
I bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:
Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d
The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).
Here's how I prepared to install:
1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD)
2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)
I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.
I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
I have an Acer V3-571 (i5, 6GB ram, 500GB HDD, Win 8 pre-installed from new).
I have been trying all day to install 8.1 to no avail. 5 or 6 times.
It starts the install okay then near the end the install stops and gives an error code 0xC1900101 - 0xC3000D
And asks me to restart and reverts to Win 8. One thing I have noticed is that the 'Windows software licence terms' box does not appear at any point.
I forgot to mention I run 'Start is back' normally, but uninstalled it just in case.
I can't get Windows 8 installed.
I have a new intel build with a brand new kingston hyperx SSD. I get through to selecting a drive to install Windows and have tried
1. Using the single unallocated drive
2. Creating new partition unformatted (this creates 2 partitions for me. A system and a primary)
3. Formatting the new primary partition (which always fails)
With option 1 it remains at 0% files copied on next screen and goes to "could not format partition... error code 0x80070057"
Option 2 AND 3 yield the same error.
When attempting to clean the disk through cmd prompt using "Clean" in Diskpart, I receive a "redundancy cyclic error"
System:
Asus P77V LX
Intel 3570k
Kingston HyperX 120GB
Kingston HyperX 2x8GB 1600MHz
Windows 8 System Builder DVD
I have previously been running windows 8 dev edition on a 32 bit drive but need to upgrade.
I just got a new laptop, a Lenovo X230, for which I paid extra to have the OS on it as Windows 8 Pro.
So--now I have it, and Win 8 Pro 64 is installed and activated on it. I am a legal owner of Win 8 Pro.
However, I would like to do a clean install of Win 8 on the computer, to have it free of bloatware, etc. (In fact, I would like to set up a multi-boot with Win 7, and perhaps even triple boot with Xp as well. (I have installation media and my product keys for XP and 7 though, so those are not really a problem.)
The computer came with no discs at all. There is a procedure to make recovery disks. I may do that, but I think those will be to restore the computer to how it came from the factory, and therefore not usable for a clean install.
I don't see my product key for Win 8 anywhere. Not on the computer, not on any kind of card that came with it, etc.
I looked at the tutorial here for clean install of Windows 8, but it requires an install disc and product key. I have neither, although I am a legal owner of Windows 8.
Is there a way I can create (from my installed Windows 8) a win 8 install disk, that can be used for a clean install? Or a link to download one? Is there a way I can get my product key?
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
I've been trying to install the printer software for an HP Laserjet printer and can't get it installed. I've even had an HP tech person try to install it via remote control and he couldn't. I was told that something on my system is preventing the installation.
I ran sfc /scannow and it found corrupted files that it couldn't repair. I would be happy to send any log files that may be needed.
bypass this error code installing my win 8 software
"your computer needs repaired
error code: 0xc0000260
I am trying to install Win 8.1 from pendrive, i try to install win 8 too from pen drive getting same error.
View 1 Replies View RelatedI'm installed Windows 8 on my desktop. The Windows 8 Upgrade Assistant indicates that this software will install OK. It was NOT flagged as a problem.
However, when I went to install it, there were warnings that it wasn't supported and when I try it, I get errors about the registry.
How to use VB.NET, I don't understand it, and I'm used to VB 6.0. Is there a way to use VB 6 in Windows 8?
My laptop originally had Windows 8 installed on it on an SSD and an HDD. I have since wiped the drive clean. But now, I need to get Windows 8 back for work. How can I replicate the original layout with Windows 8 being put on both a SSD and a HDD. The nature of my work involves a lot of CAD software usage for projects as well as research and the like. As such, I would like for such software to be located on my SSD for faster speeds.
View 9 Replies View RelatedI've recently purchased a new laptop with a genuine windows 8, and then I upgraded to 8.1.
Is it possible to install with the same DVD using the same product key?
I have a Kingston SSDNow V200 128 GB SATA III 6 GB/s 2.5-Inch SSD I was using on my old Dell Precision 370. I now have a new Lenovo IdeaCenter K450 running Windows 8 X64 and I want to install the SSD in it.
This is what the drives look like now:
I want to clone the 1st 4 partitions plus the C: partition. I can reduce the size of my existing C: so everything will fit on the 128GB SSD. Anything I need to watch out for? I would think that cloning the existing setup should work. I will connect the SSD to the lowest SATA port, where the 2TB drive is now and move the other two drives up by one SATA port.
I am using bootcamp to run windows 7 on my mac. I recently used the windows 8 upgrade assistant to purchase windows 8. I received a product key and an .iso file but I decided to wait until a upgraded. Today my windows 7 crashed and I am unable to boot windows 7 anymore and i have a 'Missing Operating System' error. I have tried to recover windows 7 without success. So my question is: Can I install windows 8 on my mac through bootcamp by using a purchased upgrade key and if so how would i do it? I only have the windows 8 pro upgrade key which I had a backup of before the crash and i do not have the .iso file. Also would I still be able to use the upgrade key even though I am unable to access windows 7?
View 1 Replies View RelatedI'm running Windows 8.1 on an UEFI system, clean installed from my USB-key created with Rufus. But when I try to boot with this USB-key on my older PC (which does not have UEFI), then before installing Windows it says that there is no HDD or partition Windows can be installed in? I can then boot again with USB-key select rep. PC, start cmd, change the HDD to GPT, then Windows can be installed, but then it can't boot from the HDD!!
How do I make a bootable USBkey with Windows 7 or Windows 8 that can be installed on an ordinary MBR HDD? I need to make it on my system running GPT SSD.
I have tried this:
CMD (elevated)
diskpart
list disk
select disk (selected my USB)
clean
create partition primary
active
assign
exit
and then copied my windows 8 dvd onto it.
It will boot, but Windows will only install on a GPT HDD.
What to do?
I was able to start the install of 8.1 Preview directly from the downloaded .iso file. Just double clicked on it to open in Windows Explorer then double clicked on setup.exe and off it went. This only works from a booted Windows 8 system (not sure about Windows 7).
[URL] .....
Didn't need to create a bootable flash drive or DVD.
I have recently purchased Windows 8 Pro Upgrade and for Christmas I will be getting my first SSD.
I want to do a clean install of 8.1 via USB, is this possible with the Windows 8 Pro Upgrade key? I have read through numerous tutorials and think I've got it right but just want some to clarify this will work.
Download the 8.1 ISO
Use the generic key to run the installer
Setup the PC
Open PC Settings
Change Product Key enter Win 8 Pro (upgrade) key and activate
Do I then need to do the reg edit and command prompt changes? Regedit - HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/Setup/OOBE Command prompt - slmgr /rearm Do I have this right or am I missing something?
Tried numerous times to install the update but keeps hanging when at "Applying PC Settings". It usually stops at around 84%, eventually the screen will go black only showing the cursor then finally it shows the bsod. The bsod says: driver power state failure.
View 2 Replies View RelatedI have windows 8 installed from dvd and after a restart the pc won't boot anymore. It tells me:
Your pc needs to be repaired. The required boot configuration data file is missing some required information.
File bootbcd
Error code 0xc0000034
So I tried to rebuilt the bcd, used the bootrec commands , tried auto repair, tried system recovery but nothing seems to work.
