8.1 install error 0xC1900101-0x40019 and 0x80070652 and Windows 8.1 installation failed and reverted back to Windows 8.0
I'm lucky the computer even came back to life. I have an Intel HD Graphics 4000 video card, so the review from ADRStudio replied on February 15, 2014 on page 18
could address this problem but I'm not so sure. I can't find the Win 8.1 drivers at HP for my machine, they only offer Windows 7 or 8.
I've been reading Latest Win 8.1 ISO "Breaks" System Image Functionality
and on my dual boot laptop with Win 7, this may be a fatal error when trying to install Win 8.1 because 8.1 adds another System partition and kills off the one I had been using.
how widespread & long-going it is, I'm gonna stick to Win 8.0 for now.
I just put Windows 8 on my main system and then tried the 8.1 upgrade and got an error saying it ran into problems and gave me this code: 0xC1900101 0x40017. That happened to me on my laptop as well and all it required was for me to install one security update and then it was fine. Well, my computer this time shows all updates are current.
I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc. I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive. I got the same error code with DVD disc that I get with USB Flash drive. I formatted HD during beginning of install so there is no OS on laptop...
Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.
I ran a MemTest86 and did a HD Test from BIOS and both passed.
From 8 pro 64bit (with media centre) to 8.1, tried many times, no luck, always end up getting the same error code 0x20017, then rolled back to 8, every driver has been updated and there no external driver whatsoever.
I have a Dell XPS 18 portable all-in-one machine that came with Windows 8, then I updated it to Windows 8.1 without any problems. It caught a nasty virus and I had to restore it to factory settings, which leaves me back at Windows 8.
I have tried multiple times to install the Windows 8.1 update through the Microsoft Store but keep getting Error Code 0xC1900101-0x40017. I have tried the following but get the same result;
Ran all of Windows Updates that would come up Verified that all drivers were up to date. My video driver is NOT a Nvidia but an Intel. I've seen posts stating that this driver needs to be updated in order to fix the problem. Ran Selective Start Up
My laptop is ASUS S46C, come with window 8 OEM 64bit. As a diligent updater, i gt 8.1 through the window store. A few days ago, i gt error code 0xc0000185 with the BSOD. I borrowed a window 8 dvd and somehow able to bypass the problem without reinstalling the window.
But now the system seems corrupted or lack of some system files as explorer and firefox always freeze. But when i tried to refresh/reset the BSOD appeared again with the error code 0xc0000185.
I have tried to created an iso file but both the normal product ID and the product key i found by Belarc Advisor does not work. I guess OEM key is no use after all. So can i know what are my options?
I have a pc that which it's cpu is 64 bit base and in the past i installed windows xp x64.now i want to install windows 8.1. At first I tried to install windows 8.1 X64 but after installation it cannot boot and the error is :
After that i installed window 8.1 X32 and it works fine ,but I want to know why i cannot install x64 .i am trying to installing and troubleshooting of that on other pc that is exactly like mine. I cheked the cpu with core info and the result is :
Coreinfo v3.21 - Dump information on system CPU and memory topology Copyright (C) 2008-2013 Mark Russinovich Sysinternals - Windows Sysinternals: Documentation, downloads and additional resources
Intel(R) Xeon(TM) CPU 3.20GHz x86 Family 15 Model 4 Stepping 10, Genuine Intel
On an Asus laptop with Windows 8 preinstalled, I have secure boot on, AV off, but every time I try to install the update from the Windows Store I get as far as:
Getting the update ready This App wasn't installed, - view details.Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code 0x800703f9
I've tried installing with nearly every non-windows process disabled, but that doesn't work.
I am trying to download the windows 8.1 on a windows 8.0 Toshiba S855D-S5120Laptop. Laptop specs 2.3 APU A10 Quad Core, 700 Giga HDD, 8 Giga RAM, and graphic ATI 2 giga memory 1200 x 800 screen . The OS is the first edition of windows 8.0 and I had widows preview 8.1 on it downloaded from the windows store. When I download the windows 8.1 from the store, I get this error code 80240031 ( I looked up the error coded and it mean invalid file) at 50% file download. I have used the windows restore function to restore the laptop to windows 8.0 and still the windows update does not work. I have tried resetting setting to default factory settings and same thing happens with the download. I have also bought the window pro 8.1 pack and the same thing with the windows 8.1 it stops at 50% and same error code comes up. I have also done the WSReset.exe and no improvement. I have all of windows updates and still nothing I do is working.
I have a problem where I turn on my pc and get error code 0xc0000225. It's and Acer desktop I bought July (2013) for a little B-Day present . But now it stopped working. I can't take it to a repair shop because
1. I'm not a fan of them
2. They tend to take like a week :I
I need it soon I'm only using my other laptop. I make like intro/outro's for people and I have one person who asked me a week ago which I feel bad about. Plus all my school work is on there and my dad also has his job documents nothing can be erased on there.
It gets stuck at about 80-84% when updating then it says "Couldn't update to Windows 8.1 - 0xC1900101 - 0x40017"
I haven't ever been able to find decent info on the actual microsoft site. I have no devices plugged in, no partitions, etc. Why is this happening! Any work arounds? Would it be better to just burn the ISO and try it that way? But isn't that supposed to be the beauty of the "store" so I don't have to do that?
I recently built a rig (spec below) and originally installed windows 7.
I decided today I would install windows 8.1 as I get it for free from my university. I booted the installation disc in EFI mode, wiped the SSD and deleted all partitions. I let windows create the partitions it needs and proceeded to install.
The installation got up to 2% in expanding windows files and showed error:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code: 0x800070570.
I rebooted and tried again several times and the same thing happened whether I chose EFI cd boot or not.
I then reinstalled windows 7 without any issues, and downloaded an 8.1 pro disc image from mydigitallife. The installation got a little further into expanding windows files, but the same error came up again.
Ive been reading that it may be a memory issue so i'm the process of reinstalling windows 7 and running memtest86+, but I doubt this is the case as its a mew system and windows 7 has no trouble
Created a bootable flash drive using Universal USB Installer from WindowsBlue-ClientwithApps-64bit-English-X1899605.iso. Create completed successfully with 452MB of free space left on a 4GB flash drive.
During install, I get this about 10 seconds after the ugly fish appears during install.
I'll burn a DVD and try it but much prefer a flash drive for install.
Downloaded from Windows.com. Installed and upon final reboot got this error. "The OS couldn't be loaded because the kernal is missing or contains errors." Suggests doing a repair??? by inserting the Disk. Don't have disk, it was a download. What to do next? Is the main file on the HD that I could burn to DVD or??
So my windows 8.1 installation became corrupted, so I backed up data and did a clean install after deleting all partitions.
After the install on the first boot, right after the process of "installing apps", it showed an error message saying an error occurred causing windows to restart, and created a memory.dmp file.
I just want to make sure this installation is stable before continuing to update to 8.1, especially after my previous issues. There are also some errors in the event log that I don't understand.
The errors came after install of Windows 8, as that was the key I had.
Windows failed to download and install 92 updates with error code 80248007
I upgraded my HP windows 7 pre-installed to windows 8.01. I tried ubuntu 13 using wubi then i removed it but once I switch on my pc , I get windows 8.01 then ubunto( which fails to boot due to windows boot error) I kept booting windows 8.01 that was working fine till I installed ubuntu 14.04 after I left an allocated partition for it to install. I made manual partition using the free space and installed ububtu. After installation, I did not find grub and I got black screen: windows fails to start ; oxc000001. after I used boot repair cd, I fixed my ubuntu and brought back grub. now the situation is I find grub 2 with ubuntu that I can access but the windows 8.01 load is not working. All my files are in windows. how to get windows 8.01 back to boot? I tried repair disc but it did not fix it stating disk error and partition drive missing.
I bought a new SSD and want to do a clean install on it, however am having problems during the install process and receive the following message:
Windows 8 cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007025d The install images was downloaded from the Microsoft website and I have tried using a USB thumb drive and DVD install disc and both receive the same error. I have used the DVD disc when I originally installed Windows 8 Pro on the same desktop but on an IDE harddrive and believe the disc should still work (i.e. no scratches on it).
Here's how I prepared to install:
1. Unplugged all harddrives except for brand new SSD (Crucial M4 128 GB SSD) 2. Changed bios settings to AHCI (before was on IDE) (using Asus P5k-V motherboard)
I'm not sure what's going on if the harddrive is corrupt, the bios settings need to be tweaked, the drive is incompatible with my motherboard or something else.
I don't want to go back to using the IDE drive to boot windows but rather use the new SSD.
Ive just done a clean installation of Windows 8. I checked device manager straight away. There was a listing under Other Devices with an exclamation mark listed only as "Media". Ive never seen that before so I havent a clue what it referred to. When I clicked on its properties it said Internal High Definition Audi Bus. Was this a serious issue..maybe a corrupted installation?
I wasn't sure what to do but because I had installed from Windows CD and not factory image I had to go to the Dell site and then install the Intel Chipset software. I then rebooted. The Media icon and exclamation error then disappeared from Device Manager.
Was it the Reboot of my PC that got rid of it or was it the Intel Chipset software being installed that sorted it out? Also what is "Media" referring to or is it just a generic term? Also, Im always confused as to what is the difference between an exclamation mark and the blue question mark on a white background in Device Manager which Ive seen before too?
I bought a Windows 8 laptop, ASUS Q500A, and reformatted it with Windows 7.
I went into the BIOS and used "Restore Defaults" and now all Boot Option Priorities are deleted.
Each time I boot the laptop, it automatically goes to BIOS (or UEFI).
I tried inserting the Windows 7 disc so I can access Startup Repair or Command Prompt but it freezes before it could get anywhere even when I tried it with an external CD/DVD drive.
I cannot get the laptop to boot to the hard drive or CD drive at all,
how I can reset the boot option priorities so it will be boot to the hard drive again.
Windows 8.1 failed to install. It would download, install, restart, install some more, restart, and then when it got to the updating devices or whatever it was exactly, it would error with 0xC1900101 - 0x30018. I found threads that pointed the issue to being wireless card issues. I tried updating the drivers before install, no go. The only thing that worked was disabling the card in the BIOS (I actually just ripped the damn thing out, but it works the same).
So finally got windows 8.1 installed. Went to put my wireless card back in, booted up, almost instant frowny face blue screen. So 8.1 broke my wireless capability all together. Otherwise it looks like I will just have to wait for microsoft to fix their default drivers or whatever they did. FYI, i have a ASUS Dual-band PCE-N35 wireless card.
I have a new intel build with a brand new kingston hyperx SSD. I get through to selecting a drive to install Windows and have tried
1. Using the single unallocated drive 2. Creating new partition unformatted (this creates 2 partitions for me. A system and a primary) 3. Formatting the new primary partition (which always fails)
With option 1 it remains at 0% files copied on next screen and goes to "could not format partition... error code 0x80070057"
Option 2 AND 3 yield the same error.
When attempting to clean the disk through cmd prompt using "Clean" in Diskpart, I receive a "redundancy cyclic error"
System: Asus P77V LX Intel 3570k Kingston HyperX 120GB Kingston HyperX 2x8GB 1600MHz Windows 8 System Builder DVD
I have previously been running windows 8 dev edition on a 32 bit drive but need to upgrade.
I purchased a new laptop last week: Lenovo G500.it has Windows 8 pre-installed.at present i am still using the pre-installed McAfee Internet security programme for my AV;i have successfully done all updates(which are set to automatic)
However-despite 5 attempts to free upgrade to 8.1 i am still getting the Error Code 0x80072ee2 message and installation fails. on checking this out i am finding 'fixes' but these require installation of 'repair tool' type applications(only operable if bought etc).
I updated one laptop with one promo code bought etc and all fine. Came to do the same with another pc but after i inserted the promo code and clicked to submit the payment the screen froze at that point and wouldn't go any further.
Have received an email from Paypal to tell me the payment has been processed but obviously when i try to re-install it etc it's asking me for a promo code and to pay again... i can't carry on from where i left off !! what i can do now?
This is all done via the online offer and Windows Upgrade Offer using the downloaded Upgrade Assistant.
Ever since this new update with 8.1 I can't install any new apps... I first noticed when my Mail app stopped working and froze my computer. So I uninstalled the app and when I tried to install it back I get the screenshot below.. So I tried Yahoo Mail, some games, some other apps.. Nothing will work. Mail finally said it installed, but it's not on my computer and the app store says it's already installed. I have my own custom built computer, if you need the specs look under the specs drop-down, it's all there...
