I have found a previous case very much like my own but the solution the user applied is unfamiliar to me and by the sound of it he now has an inferior windows experience to fix this ungodly bug.here is the link:Tabbing Out Problemso in short what windows does is tab me out of whatever I am doing. this does not happen when I am playing games because in a game I am constantly clicking on my windows and keeping it active so even if the bug does happen I do not notice it. It also happens when I watch movies but I dont notice it because I am not typing or scrolling/navigating much until I need to pause/stop the mediaplayer. however instead of 1 click it takes me 2.
Every single time my windows 7 updates, my windows keep randomly tabbing or something, making it almost impossible to type anything for more than 2 seconds. So if I am typing something in Word, I will be typing for about 2 seconds when I notice that the Word Icon on the control panel becomes unhighlighted (at which point I can't type anything), and then becomes highlighted again in the next few seconds and I can type again for a bit. This cycle continues to repeat itself and I have resorted to just restoring my computer over and over again so that it has not recieved updates (Im like 20 behind or something). That's the only time the problem seems to resolve but eventully I will be needing updates no? How do I fix this?
Getting distorted (cracking/popping) sound and poor FPS/screen tear after switching application from a full screen game via the taskbar and via alt tabbing.The only way to rectify the issue is by restarting the PC as reloading the game will semi fix the sound issue, but limits my FPS to 30 and will cause the sound to slowly deteriorate to how it was before.
It mainly happens when I have a full screen program while watching a Stream/Video on my second monitor and I switch program through the aero feature in the taskbar/alt tab pop up. Sound goes to shit, then the frame loss kicks in a second later.
I assumed it was an issue to do with the aero application preview feature, but I'm not 100% sure. I've disabled it by using the classic theme which I've been using for the past 2 days and things seem to be alright.
I have a laptop that I bought from a highstreet shop that came with win 7 already installed. It didn't come with the disks or anything though. Now, I am probably going to buy another laptop and was wondering if there was anyway to move the OS over? I will be moving the HDDs across from one laptop to another, will I just be able to boot from the primary HDD that has the OS on it?
I had done a large number of System Restores recently, then a complete re-installation of Windows 7 via the Toshiba software partitioned in my laptop. I had updates waiting to be installed before that and I'm also worried whether the ones previously installed were picked up automatically. Now I'm not sure how to proceed.
I just did some reading and found out how important the updates are security-wise. Previously I had thought they they were more or less optional.
I've tried all the methods I can find, and I'm not so strong with boot files or images in general.
I have an image of my current system, created last night ( created in windows 7 from the "Ctrl Panel> Recovery>Create a system image" option) stored on my external 1.5Tb drive. It is stored in the "WindowsImageBackup" folder that was created and contains two .vhd files. one is obviously the image at 39Gb)
With my system running (Win7 Home Premium) I want to install this image onto a new, larger HDD and then replace my current drive ( 80Gb ) with the new, larger drive (320Gb ).
I simply want to copy the image from my external 1.5Tb drive to a "New" 320Gb drive (connected to my system via a USB2.0 to IDE and SATA cables that I use for backing up people's files and things from crashed machines) The "new" drive shows up in "Disk Manager" as "E", healthy partition, formatted, etc.
Is there a way to install my backed up image to my 320Gb external drive, THEN open my desktop pc, and replace my current 80 Gb drive with the 320Gb drive (already imaged and bootable as if nothing changed except the size of the drive) ? Also, do I need to delete the partitions on the "new" 320Gb drive so that it shows up as unallocated space?
I have a Gigabyte GA-P35-Ds3 motherboard that has just died. Do I need to replace it with the identical model or is there some leeway in replacing the mobo that won't affect the current Windows 7 licence.
I recently had hardware failure that resulted in myself RMA'ing my motherboard. It is my understanding that I will be receiving the same model of motherboard, but a different unit. Am I eligible to use my current Windows 7 product on my computer after I receive my replacement motherboard? Specifically I'm using Microsoft Windows 7 Home Premium 64-bit OEM.
For one reason or another I am frequently installing a fresh copy of Windows 7 onto my hard drive. I use a lot of software so as things get installed and uninstalled bad things tend to happen and sometimes things are beyond repair.My question is can I use my product key to download from someplace an image of Windows 7 with all the updates already installed? Installing the updates becomes very time consuming and the machine has to be restarted many times over so I am trying to avoid this. I suppose I could disable the updates but that is not really my intent at this time.
I had an existing properly working system consisting of a SSD 64GB for my OS and a Raid1 config with two 1TB drives for data. My SSD ended up being to small as certain programs do not let me remap content to a separate drive. I have upgraded (swapped out) to a 240GB SSD reinstalled windows on it and windows does not see my raid1 in disk management, nor does it see my two monitors or my connection to my router. It was my understanding I could just swap out the SSD's and reinstall windows and it would see everything.
I have at the beginning have 1 (Fckyeahphotography ) account i logged in to the system. but later i got another one with my Blanket name i need type in my name sandra. The funniest is i cant see my 1st Sign in account Fckyeahphotography in system and no i cant sign in in my 1.st account.
Assume I have opened a couple of windows for some applications on my Win 7 desktop.Can I somehow store the current window positions and sizes (and restore them later (even after a reboot))?As far as I remember there is a tool which ofers this feature but I don't remember the name.
I have my current system live and working well. I want to add an SSD as the main boot drive.Is there a way I can migrate or reinstall easily on the new drive without having to run updates on everything again? The only hardware changing (adding) would be the SSD.I plan to format the old drive to use as storage.
So I have Windows 7 RC installed on my computer still, and as we all know.What I want to do is simple, I want to reformat my hard drive, and install Windows XP Pro...which I own and have a product key for.When I put my CD in the drive and restart, I get the "Press any key to boot from disc" screen, I press a key, and it'll take me to the blue Windows Setup screen, and it begings to inspect my hardware.. and this is where the problem is (I haven't even began to install or make any changes to my hard drive and I get this lovely blue screen of death-type error: A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:Check for viruses on your computer.Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated.Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Now, I haven't have any changes to any hardware on my laptop ever.I ran chkdsk and it didn't find any errors, and it ran both a quick scan, and full scan. And I also ran some type of scan within Window 7 (right-click drive C, then "Properties", then "Tools", then something like "Scan drive for errors/bad sectors") and it also said everything was fine.Last night I sat down, backed up all the necessary data from my hard drive, and was looking forward to having a clean installed OS, and I can't even get it to install.
I'm currently building a Server as well as in the market to snag a new laptop. How would I go about making my computer a virtual machine so that I could port over to my new gig.
Reason for this is that eventually I would love to get myself more "Organized" with where I keep important documents versus random crap. Stored all over my various machines.
My current Hdd which contains my OS and program data totals nearly 249GB, obviously SSD's which are this big are very, very expensive, how can I transfer my current OS install to a new SSD in an easy as possible way but keep the OS and the programs that are installed.Some of the stuff on there, like games, I guess I could uninstall and then reinstall them later so that they are no longer on the boot drive.
I took my computer in for some repairs and requested that I get Windows 7 installed on it since they wiped the hard drive for me to begin with. So they did that and never bothered to ask if I wanted 32bit, or 64bit.My motherboard and so on are 64bit compatible, and the sole reason why I want this is because many of my video-games claim that I don't have enough memory with the 3.25gb of RAM usage to use certain video settings. In reality I have 16gb of RAM ready to be used, unfortunately the 32bit Windows 7 can't use it. Kind of lame that in 2012 all versions can't simply do it, but I'm sure more technological reasons negate it.Now my questions are that my current 32bit Windows 7 serial key can be used with a different install CD that is 64bit? My sister has Windows 7 64bit CD and I'm wondering is that even legal to do to begin with, as well as possible? Oh and I'm aware they must be the same version such as Home Premium, which they are.
I'm trying to delete the windows.old folder, but found out that I have Securom and it's preventing me from doing so. There are two files that are apparently encrypted with strange names and I've found some advice on how to completely remove Securom from my computer. However, I just want to make sure that I don't remove it completely as I'm currently playing Company of Heroes: Game of the Year edition (Amazon download) and the Mass Effect 2 demo. how to remove the files in windows.old only? Does this involve deleting specific registry keys, too?
I bought this computer three months ago, and had no problems, up until now. It all started with it freezing up all of a sudden, forcing me to restart. But the display didn't show up. Tried again. Didn't work. Eventually, I removed my GPU and placed it back again, thinking it was loose. Then it finally worked.
Then it happened again. So after taking out my graphics card twice, it finally started working, but my HDD started making strange sounds. A sound I've never heard before, and only occurred during start up. I shrugged it off.
Now I start getting these sort of instances, when what ever program I have open, stops responding and Windows get's pretty laggy. The Windows Explorer (Not IE, the tool bar thing) also is unresponsive. I know it can't be a virus, Trend Micro showed no signs of anything after I scanned my computer a bunch of times.
So I did what any sane person would do, I did a bit of research on the net, and found this thread on this forums. The person here had a similar problem that I did. After reading most of the comments, I downloaded HDD SMART, as instructed, and apparently "Current Pending Sector Count" is yellow.
My windows is minimizing the programs that im using. Well not exactly minimizing but sort of putting it back to desktop. I tried to install the windows again but whit no results. it's doing it again. I cant even write my documents in word properly because of this.
Installing Windows 7 64 bit to new ssd. The current hdd will still have the current Windows 7 OS on it. As long as I have the bios boot set to the ssd can I leave the other win 7 OS on the mechanical drive in case of problems ?
Iam unable to run disk check from command prompt, after trying to run dskdsk tells me, The type of file is NTFS, Then cannot lock current drive, Then Windows cannot run disk checking on this Volume because it is write protected, have checked in bios no write protected no hiar left
I just purchased a new 10,000 RPM VelociRaptor drive and I'm going to use it as my OS drive. Is it possible to set up a RAID 0 with my current drive (hitachi 1TB 7200RPM) without having to format it?
HD crashed, been replaced. local tech installed xp, never worked. found Windows 7 clean install info, but cant get past "sorry for the inconvenience" page. want to just reformat the hd, but have no actual working os. tried Killdisk, wouldnt work.what is a good boot disk/reformat disk i can download to start from scratch?
I am new to this site but I recently found out some of my documents and pictures have been edited I never had a problem with microsoft 7 or even know how to. Use it but I. I've been receiving emails I have a herassment case going on with my ex employer I never used used her computer but when I hooked up my black berry to my pc al my contacts were exposed ever since then my black berry and my pc have been acting weird my files and my emails have been looping and. How do I make it stop and how can I obtain the ip adress or address.that are using my microsoft 7 office to cause all this mayhem without going thru geek squad. And all my emails have been comprimised.
I was wondering if I can use existing ssd (loaded with Win 7 and all current drivers) for a new build: new mobo, cpu and ram.Both will be x64 Guess I`m just lazy for not wanting to do another clean install
When I right click my favorites folder (in Windows Explorer) there's an option to "add current location to favorites." However when I try that option (for example, when browsing in C:Program FilesAdobe) nothing gets added.
