Unable To Shutdown / Waiting For Task Host Window?
Jan 19, 2013
From a couple of days, I've the problem that SOMETIMES (not always), when I shutdown the system, appear the message concerning the system is waiting the closing of Task Host process, but I'm forced to close manually from there, because the waiting is useless.The message should be this: "1 program still needs to close: (Waiting for) Task Host Window".It happen only from 7-10 days, and Revo Uninstaller report that in last days I only install some games and these programs:
DivX Pro 6.8.0 VFW
Microsoft Visual C++ 2008 Redistributable
Microsft XNA Framework
Probably, all programs installed with some game.How can I do? I tried the exact version of hotfix here: http:(url) but it doesn't install because it's probably already installed (I have SP1).I want to avoid to restore an old statut with System Restore. I have Windows 7 x64 with SP1 and latest updates for everything.
View 6 Replies
ADVERTISEMENT
Nov 4, 2009
Windows 7 32-bit Why do I get the following message every time I shut down?
"(Waiting for) Task Host Window Task host is executing shutdown tasks, and stopping tasks that are already running"
There are NO tasks running. This has been going on for days now. What causes this crappy annoyance and how can I fix it?
View 9 Replies
View Related
Feb 10, 2013
console window host has stopped working, this message always pop up on laptop screen, please help me fixed this problem. im using window 7 ultimate os.
View 1 Replies
View Related
Jul 22, 2011
My windows 7 dell laptop hung on an application, no responsive desktop, no hitting start menu - nothing. I went to task manager and found NO Shutdown Option tab - I'm use to xp which had options under Shutdown, like restart, etc. So how do you shut down windows safely? I had to hold the power button until it turned off. On restart of course I got the dos window "windows did not shut down properly. Do you want to start in safe mode, or hit enter for the highlighted start windows normally
View 1 Replies
View Related
May 28, 2011
I have some knowledge on setting up a task to shutdown the system at a specified time everyday using the Task Scheduler in Windows 7. However, I would like the option to have a "1 minute warning" that system is shutting down so that I can cancel it if I am currently using it. How would i go about this? For example: I have it scheduled at 10pm to turn off. However, I am still on the computer at 9:59. I would like some dialogue to come up and give me the option to cancel and I will just shutdown the computer when I'm done.
View 2 Replies
View Related
Jan 15, 2013
I have Windows 7 ultimate installed. I used the Task scheduler one time to do a Shutdown of it set at 10pm it worked fine one night now when i set it for a different day it does not work anymore. i have the right trigger, time and date etc set correctly WTH.
View 3 Replies
View Related
Oct 14, 2012
Since I built this computer in 2010 I've had a scheduled task which runs a VBS script to remind me to take my tablets each morning. Until the last few days, only one element was visible from this task, the message box spawned by the VBS script.However, in the last few days, I also get a taskeng.exe window appearing at exactly the same time as the message box. The window is labelled taskeng.exe, has a VBS scripting host icon and the content of the window is pure black.If I terminate taskeng.exe in Task Manager or click OK in the VBS message box, both the VBS script and that black window disappear.I have no idea what might have caused taskeng.exe to only appear in this situation, because MSI AfterBurner also uses it to start the app during user login and it doesn't appear for that.
View 1 Replies
View Related
Feb 20, 2012
We have 2 x Server 2008 R2 domain controllers and 120+ Windows 7 x64 clients. We have a print server which runs Server 2008 R2.We have several other servers which also run Server 2008 R2. An issue occurs intermittently and apparently at random, whereby a client will be unable to resolve the host/computer name of the print server. When the issue occurs, we have confirmed the following: - The client has a valid IP address.The client DNS server addresses are correct. - The client can ping the IP address of the print server. - The client can resolve the IP address of the print server by using nslookup and the server�s FQDN. - The client cannot resolve the IP address of the print server by using nslookup and the host/computer name of the print server.The issue can occur regardless of which domain controller the client used to log on. - When the output of ipconfig /display is printed to a text file, many of the other servers in our domain are present in the DNS cache but the print server is not. After the ipconfig /flushdns command is executed, the client can resolve the host/computer name of the print server immediately.
View 2 Replies
View Related
Jan 22, 2011
I am using Windows 7. When I shut down my computer, I see this phantom transparent window pop up immediately and close within less than a half second. I have looked at my windows processes and even done searches to see if I can generate a shutdown log, but get no clear answer on how to identify what the window is from. My internet searches get me nowhere as becuase all I get it security functions of logging in and logging out of Windows.
View 3 Replies
View Related
Dec 28, 2011
I have Dell Laptop M1530...Just upgrade from Vista home premium to window 7 Home Premium couple weeks ago.
Now when I turn on my Laptop it suddenly shut down by it self and when re-started it up and it shutdown by itself again, and again, messege said : "window has recovered from an unexpected shutdown in window 7".
I attached a Minidump files.
View 1 Replies
View Related
Dec 15, 2011
Windows Task Scheduler seems determined to fail me.When I try to run it, it simply says "remote computer was not found," and the service is useless.I tried running services.exe and starting Task Scheduler from there, but it 'starts and stops,' with the following message:"The Task Scheduler service on Local Computer started and the stopped. Some services stop automatically if they are not in use by other services or programs."This makes no sense, and I need to degrag asap.
View 4 Replies
View Related
Jun 12, 2012
My Dell Inspiron laptop with Windows 7 was working fine until yesterday evening.When I turn it on, it loads the Log In screen and I am able to type in my password and log in. However, after that I am presented with a black screen and a white cursor. It will not let me open Task Manager and when I press alt, ctrl and delete, after a few minutes I get this error message "Failure to display security and shut down options".I have tried System Restore but had no luck with that.I am not able to run in Safe Mode either, it constantly freezes.My laptop did not come with a Windows 7 operating CD.
View 1 Replies
View Related
Jan 11, 2013
I've been meaning to look into the fact that I couldn't access my Task Manager anymore at all or even when I try to run regedit I get messages like "Registry editing has been disabled by your computer administrator" even though I am one of two of the only administrators for this machine.
View 4 Replies
View Related
Jun 12, 2012
My Dell Inspiron laptop with Windows 7 was working fine until yesterday evening.
When I turn it on, it loads the Log In screen and I am able to type in my password and log in. However, after that I am presented with a black screen and a white cursor. It will not let me open Task Manager and when I press alt, ctrl and delete, after a few minutes I get this error message "Failure to display security and shut down options".
I have tried System Restore but had no luck with that. I am not able to run in Safe Mode either, it constantly freezes. My laptop did not come with a Windows 7 operating CD.
View 2 Replies
View Related
Nov 25, 2012
I just noticed that I cannot open my task manager anymore, I right clicked on my task bar and click on Start task manager and nothing happens, did also the CTRL + ALT + DEL then click on Start task manager still nothing, no recent changes made in computer or newly installed programs.
Operating system windows 7 Ultimate 32 bit
2 GB RAM
AMD Dual Core 2.8 Ghz
1 GB VC
View 1 Replies
View Related
Jul 6, 2012
Not able to Drag tab to New Window.
View 7 Replies
View Related
Apr 26, 2011
I have installed the 32 bit driver for my Minolta 1300W. I can print happily in XP mode but I don't seem to be able to be able to use the printer in the Windows 7 host (64 bit Pro). Should I be able to see it as a printer if I attempt to print a document in Office? Launching the application doesn't help.
View 2 Replies
View Related
Feb 29, 2012
I am unable to shutdown win7 normally. It goes through "logging off" then it stays at the "shutting down" point until I have to press the button to shut it down.
View 2 Replies
View Related
Oct 28, 2012
This just happened before I restarted the computer and did the Last Known Good Configuration for it to boot up without freezing.Before this, I had some problems with the screen turning black with an active mouse for a few seconds before going to the desktop (after Welcome Screen).[CODE]
View 4 Replies
View Related
Jan 3, 2012
I am not getting printer failure detail on taskbar.chk task-mgr property?
View 1 Replies
View Related
Nov 23, 2012
i was not able to format 1gb pen drive using windows 7
View 1 Replies
View Related
Jun 25, 2012
Basically, my data isn't important enough to require anything more than a daily backups and I shut down my computer every day. At the same time, it's a severe annoyance to have Windows Backup come up and bog down my performance if I'm in the middle of something (gaming, usually). So why the heck can't I just schedule Windows Backup to run when I shut down my compute?For the life of me, I can't see why they make this difficult to do. Too many cooks at Microsoft?
View 6 Replies
View Related
Jan 16, 2011
problem is that when i go to microsoft word or powerpoint or excel, i press the "open" button and nothing happens. absolutely nothing as in no window will pop up that has the c: drive similar to when you run windows explorer or anything. i should add that windows explorer still works, its just using the "open" or "browse" button that nothing happens. This also happens in other programs as well i just cant think of them at the moment. The problem seemed to start one day when i was playing a computer game and i was also using deskspace (for organization) what happened was that the game switched to a completely seperate desktop and changed one of the desktop wallpapers. if you dont know deskspace is a virtual desktop manager that organizes it like a cube (cube desktop is better but i cant get it to let me change the icons on each desktop which completely defeats the purpose for me. Deskspace is somewhat similar to compiz for anyone who knows about that program for linux. So back to the problem after that i went to change the wallpaper back to what it was before, and i pressed the "browse" button and nothing happened. I didnt really think much of it until i tried to use word today and pressed "open" and nothing happened. from there i tried various programs and none seemed to work.
View 3 Replies
View Related
Jul 8, 2012
I've a jar file which contains a very simple program of displaying "Hello" message in the console.I've pasted the code at the end of this thread.I want to run this jar file as a windows service.This service gets started without any hiccup,However,It simply wouldn't start the service.
I've tried running this service as using NET and Sc command.But in vain.Below is the error i'm facing C:Windowssystem32>sc start MajaService [SC] StartService FAILED with error 193.
Further, as a workaround I created a .bat file for executing this .jar file and again tried creating a window service for this .bat file,In this event i get the followingh error:
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
and below is my program:
-----------------------------------------------------------------------------------
import java.io.*;
class Hello implements Runnable
{
[Code].....
View 3 Replies
View Related
Nov 12, 2011
everytime i wanted to restart, it came up with this BSOD SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION ran memtest for 7 passes with no error seems like all my recent bsods are memory related. i dont have any spare rams to try.
View 5 Replies
View Related
May 5, 2012
I'm having a little problem with my PC (Windows 7 Pro 64bits), I can't shutdown it... The hard drive stops but the PC is always on (fans, lights and the screen stay on "shutting down". I tried to reinstall drivers and I verified if any service blocks the shutdown...
View 6 Replies
View Related
Jan 11, 2012
Yesterday when I went to shut down my computer, it froze. Not seeing any alternative, I manually powered it down. When later attempting to turn the machine on, I received an error (with no specific error message) saying that it was unable to startup successfully, and presented me with a menu for running diagnostics, backing up data, resetting to factory defaults, etc.. Being very short on sleep at the time, I decided "I'll deal with this tomorrow" and shut it down.
Just now, when powering up to try to deal with it, it started up fine. Thing is, without having done anything to fix the issue, I'm worried there might still be a problem with my machine, since I've been told failures to boot properly usually indicate something serious. The computer is an HP Pavilion dv7-6b55dx running Windows 7 64-bit service pack 1. I ran a virus scan and it came up clean, and a spyware scan is running as I type this.
View 2 Replies
View Related
Aug 16, 2011
I have a problem that occurs only during shut down only. When I select Shut Down I soon get a pop up that says....the application was unable to start correctly (0xc0000142) Click OK to close the application. the label on the window is cmd.exe. Whether I click on the window or not, the shut down proceeds and eventually after say 30 seconds the alert disapears and the laptop shuts down. clicking on the alert simply brings up another alert. All this only occurs during shut down only. Also, I have no problem running cmd.exe during normal operation, or any other program run from the command window. I have read a number of posts but do not see anything exactly like this, that is happening during shut down.
Here is the TSG SysInfo
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 8088 Mb
[code]....
View 1 Replies
View Related
Jan 2, 2013
My system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet). Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer. No errors were encountered during the installation process.After all these, I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.ard disk Led not blinking during this time. I had to do a HARD FORCE shutdown.
View 7 Replies
View Related
Jan 2, 2013
My system is a windows 7 x64. it is connected via LAN cable to my wifi router (also used for internet).Prior to installing Canon Pixma MG5370 apps and driver, the windows works fine.My Canon printer is connected via WIFI to my router so in essence, I print through my router to the printer.No errors were encountered during the installation process..After all these,I noted that my windows will not shutdown anymore. After clicking shutdown, it will reach the screen where it shows "Shutting down" and a spinning disc like icon. and this is where it will remain and not power off at all.hard disk Led not blinking during this time.I had to do a HARD FORCE shutdown.
View 3 Replies
View Related
Mar 31, 2011
i need to have a task run that will move the contents of a folder from one computer to another over my home LAN. Files get downloaded during the night on one computer and then need to be transfered to another. Usually I am doing this by hand, but then though maybe I could get the task scheduler to do it for me.I understand how to create a task, however I am having trouble with the action tab. I was thinking that I should start windows explorer (where is explorer located for win 7 x64 machines?) under the action tab, but once I do this I am not sure how to tell explorer to check the source folder, select all the files in it and then move it to the target folder.
View 9 Replies
View Related
