System Boot Failure On HP Pavilion P6000 Series
May 2, 2012
problem started within the last two weeks. PC just started boosting fan noise and then just blacked out. now each time i turned it on, it will give me 2 options prior loading system: 1) start-up repair - recommended, and 2) start windows normally. i've tried both but it just blacked out every time after a few seconds so i never got to the welcome screen.
i already tried these:1. replacing hard disk with one from broken PC and same problem as above. 2) corrected modem fan because it got fixed the wrong way by someone when they replaced the burned power supply. 3) re-seated the 2 ram sticks. 4) hooking hdd cable onto another slot on the motherboard.
maybe it is also important to note that pressing power button turns on the computer but the power-on light never even blinks or stay on except the hdd light which eventually goes out after a moment.
View 7 Replies
ADVERTISEMENT
Aug 23, 2012
About 8 months ago, I built a computer for myself;SINGLE Hard drive, 1 T;1 Partition..Windows 7 Home Premium service pack 1..The BIOS identifies the HDD..Last week, the computer worked properly, with regular shut down.3 or 4 days later, when the PC was turned on, it booted through the Windows 7 splash screen, but the log on screen did not appear.After a spontaneous reboot, the Windows 7 repair utility informed me that the situation could not be fixed. I selected advanced options and tried 2 different restore points from about a week before the last happy event. [code]
View 10 Replies
View Related
Nov 25, 2009
Pretty much what happened is that my powersupply got messed up one day and just turned off my computer and I couldn't boot it back up. I ordered a new PSU and I installed it but now when I boot my computer I'm getting "Disk boot failure, insert system disk and press enter". I've tried putting in the installation disc and using the recovery options but my OS isn't listed/found and if I click load drivers I can clearly see both of my hard drives. I have already checked boot options as well. I was also using GRUB before this all happened as well because I installed ubuntu as a dualboot.
View 9 Replies
View Related
Jan 6, 2013
find hp pavilion g series vga drivers
View 1 Replies
View Related
Nov 15, 2012
how to download the hp pavilion g series network drive
View 1 Replies
View Related
Nov 23, 2012
My HP pavilion g 1156 Ethernet controller is missing. How can I download the drivers?
View 1 Replies
View Related
Dec 15, 2012
Baixar drivers compatible vga do laptop hp pavilion g series?
View 1 Replies
View Related
Feb 3, 2013
Hp pavilion g series laptop network drivers free download?
View 1 Replies
View Related
Jan 28, 2013
i'm using hp pavilion g series intel inside core i5,originally it was installed with windows 7 home premium and after i experienced some problems i upgrated to windows 7 ultimate.so now i wanna load gaming graphics on my laptop and i'm struggling.
View 2 Replies
View Related
Jan 28, 2013
i'm using hp pavilion g series intel inside core i5,originally it was installed with windows 7 home premium and after i experienced some problems i upgrated to windows 7 ultimate.so now i wanna load gaming graphics on my laptop
View 1 Replies
View Related
Mar 29, 2012
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies
View Related
Jan 5, 2012
windows 7 disk boot failure insert system disk and press enter
View 1 Replies
View Related
Aug 27, 2011
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies
View Related
Oct 13, 2010
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies
View Related
Jan 10, 2013
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies
View Related
Jun 24, 2012
It happened yesterday while i was De-fragmentating my computer and like a month ago also. So it happened two times already, all this BSOD thing so i may not know the computer language to well , in fact its the first time this has ever happened to me (BSOD).
Additional Info: The Laptop is new about 4 or 5 months old ill leave the information right here :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
[Code].....
View 1 Replies
View Related
Sep 5, 2011
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies
View Related
Nov 11, 2011
I started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
View 4 Replies
View Related
Jan 24, 2012
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
View 4 Replies
View Related
May 1, 2012
whenever I turn on the laptop, it seems to boot into Windows 7, in that the "Starting Windows" text appears and the little animation of colors forming the logo shows, but as some point it fails. This message appears on screen:autocheck not found - skipping AUTOCHECK After a few seconds a BSOD shows up, but too fast for me to make out what it says. It used to, but after some hasty fix attempts no longer does, cycle around to a menu that informed me of this error:Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. Here's the longer history:As some point in the past I decided to try out dual-booting Windows 7 and Linux on the laptop. I got it to a state where this worked fine. I had partitions roughly as follows:[Ubuntu][Windows 7]([Data and files][Boot]) The parentheses denote a logical partition. The Boot partition was very small and only held what was necessary to launch GRUB. This week, I realized that I hardly ever used the Linux partition and decided to get rid of it to reclaim storage space. This is where the trouble begins. I rebooted into a thumb drive that could run GParted and modified the hard drive layout in the following steps: Delete the Ubuntu partition Delete the Boot partition Grow the Data/Files partition to take up the space left by Boot Shrink the Windows 7 partition to make it faster to move Move the Windows 7 partition to the front of the volume Expand it to take up the remaining space. What I ended up with was: [Windows 7]([Data and files]) My naive and fatal mistake was to trust that the Windows Repair CD could fix any boot issues, and also that there would be no catastrophic hardware failures. Both of these assumptions turned out to be false.
First, the laptop's CD/DVD drive has either broken or is too unreliable to use. I have noticed it becoming more and more unstable over time, but now (when I need it most!) it simply does not seem to want to spin up and function at all. This forced me to create a Windows Repair USB drive. However, I can't load any installation media. This is because the laptop did not come with an install DVD. It had a recovery sector, which I cannibalized for the Linux partition. I did copy the stock recovery stuff to a series of DVDs, but, well...This is all to say that any solution that requires a DVD drive is straight out until I can replace it, which I'd like to consider a last resort.My expectations for the Windows Repair CD/USB have been dashed. Attempting to automatically fix boot issues either fails for some specific reason (I can probably reproduce it and provide the details, if necessary), with a dialog to send a report, or fails because it cannot detect any problems. I have tried a variety of things based on my own research to fix this through the command prompt: Running chkdsk /x /r on all drives. Does not find any errors. Running various bootrec commands: /fixmbr, /fixboot, /rebuildbcd, /scanos. All complete successfully, but the last 2 report finding 0 Windows installations. Using bcdboot and bootsect to recreate the bootloader. Again, no errors result, but it does not fix the issue. I guess it should have been obvious that none of the boot record fixes would matter, since the laptop does boot into Windows 7, briefly.
View 3 Replies
View Related
Jun 7, 2012
I've been getting a series of system freezes (black screen, clock on my Logitech gaming keyboard freezing for ~20s before the system resets) and BSODs for about 5 and a half months. Looking through the Event Viewer the first seems to have been 19th Jan 2012 while the latest was today. There seems to be no pattern to when they happen - some as soon as the Windows desktop loads, others after the PC has been on and running fine for hours. Most of the time I get freezes but from time to time I get the blue screens with errors such as 0x4e, 0x19, 0xA, 0xC2 and 0x24. Various internet searches have told me it could be hardware-related (particularly memory) or something to do with the registry. I did install two new memory sticks (the Corsair ones) around the 15th Jan (4 days before the first crash) and I seem to remember the system crashing during a programme install at around the same time. Looking through the Event Viewer shows each crash (84 to date) is marked by "Critical 07/06/2012 18:07:51 Kernel-Power Event ID:41 Task Category63)" with a total of 17 different BugcheckCodes of which 78 is the most common, followed by 26.
I've attached all the SF Diagnostics, CPU-Z and RAMMon readouts in the following zip file:MrCheeseUK-Seven Forums.zipforgot to say that I've tried the Windows chkdsk and memory diagnostic and both came back clean (though the system crashed when Windows had booted right after the most recent memory diagnostic).
View 9 Replies
View Related
Dec 27, 2011
It all started when I was using Revo/Uninstall to uninstall Office 2010 from my hard drive. I'm running Windows 7 Home Premium. I have installed a licensed copy of Office 2007 (Student Edition), which was working just fine. Revo identified 2 registry entries that I believed applied to 2010 that could be deleted as part of the uninstall procedure. I told it to delete the entries and then, having second thoughts, I canceled the uninstall. I saw, however, that the icon for Office 2010 had disappeared from my list of "All Programs" (although certain related Windows 2010 icons still remain.I attempted an "System Restore" only to find that the "System Restore" function for each of my hard drive partitions was set to "off." When I tried to turn them on, I got the following messsages.
View 8 Replies
View Related
Jan 31, 2012
system whet off and refused to power on, only to display a message telling me that it has encountered an Error
View 4 Replies
View Related
Aug 4, 2011
I am running Windows 7 Ultimate and have an issue with System Restore in that ia m unable to creste a restore point, or any other program that wants to make a restore point before installing is unable to do so. There is a System Image Restore Point Back Up dated 01/02/11, which i am unable to access. I receive an error message:-
"The selected Back Up could not be found. System Restore is looking for a restore point that is on your back up. Choose a different restore point."
I do not have any other restore points, is it possible that this restore point is causing the problem with System Restore
View 6 Replies
View Related
Nov 5, 2011
I recently bought Windows 7. Sometimes when I start my computer, the USB will not work at the login screen. No keyboard or mouse works. If I get past the login, windows finds all my external hd's and starts to scan them. I think this is a problem with the USB.
View 6 Replies
View Related
Aug 30, 2011
Here's the problem, when I boot up my genuine Windows 7 Ultimate DVD, and I get to the select partition screen and select one, it gives me the following error : Windows could not format a partition on disk 0. The error occured while preparing the partition selected for installation. Error code: 0x80070057
I've tried what they outlined in this thread, [URL] When I get to formatting the drive in Command Prompt it just stalls at 0% and says diskpart has encountered an error; the parameter is incorrect. see the system event long for more information.
I've tried changing SATA to IDE instead of AHCI in bios.
I've tried using a recovery disk for my Acer 3830tg, but it just stalls at 0%. I've tried using a genuine Vista Ultimate DVD, but it doesn't even detect a disk drive. It's a Corsair Force Series 90GB SSD F90 in an Acer 3830tg-6412 with 8GB of RAM.
Oh the SSD works fine, I was able to boot it up and run everything fine prior to trying to do a fresh install, which in hindsight is stupid
View 12 Replies
View Related
Apr 28, 2012
my dad has a Asus x5DIJ but when he turns it on it goes straight to a blue screen and say an error has occured and then restarts. I've tried F8 and selected repair your computer but this took me to a black screen with a white bar along the bottom which said please wait loading I left this over night but nothing happened!
View 1 Replies
View Related
Feb 2, 2013
4 beeps system-timer failure how can I fix it?
View 3 Replies
View Related
Oct 23, 2011
My computer hangs after a soft boot (reboot). Cold boots are fine.
View 1 Replies
View Related
Oct 17, 2012
I am trying to turn of VSS on the drive that I use as my parity drive for my flexraid configuration. However, when I click on System Protection from Control Panel I get an error that says:There was an unexpected error in the property page:Catostrophic Failure (0x8000FFFF)Please close the property page and try again.I have looked for solutions online and the most common seemed to be run scannow rom the command prompt.I did that and it said it fixed some errors. I have rebooted multiple times and still get the same error.
View 2 Replies
View Related
May 27, 2012
Have a HP desktop PC that is acting flaky (a small percentage of the time it hangs), but keeps generating msgs about the HD Imminent Failure. Also has corrupted some files I had. I did run ChkDsk, and it came back with the same message, after several hours of checking. So, I have backed up everything I could, but would at least try to fix if at all possible. Guess some of the sectors are now bad. Have a single CD that came with PC (about 3 yrs old now) that is labeled "HP System Repair Disc", Windows 7, 64 Bit.Would like to at least try it.
When opened, it has the following:
Files on the Disc:
- Boot
- Sources
- Boot Mgr.
To Be Written To Disc:
- Desktop
Is there anything herein that might correct the bad Sectors, or any other HD problem that is software and not hardware related?
View 3 Replies
View Related
