Here's the problem, when I boot up my genuine Windows 7 Ultimate DVD, and I get to the select partition screen and select one, it gives me the following error : Windows could not format a partition on disk 0. The error occured while preparing the partition selected for installation. Error code: 0x80070057
I've tried what they outlined in this thread, [URL] When I get to formatting the drive in Command Prompt it just stalls at 0% and says diskpart has encountered an error; the parameter is incorrect. see the system event long for more information.
I've tried changing SATA to IDE instead of AHCI in bios.
I've tried using a recovery disk for my Acer 3830tg, but it just stalls at 0%. I've tried using a genuine Vista Ultimate DVD, but it doesn't even detect a disk drive. It's a Corsair Force Series 90GB SSD F90 in an Acer 3830tg-6412 with 8GB of RAM.
Oh the SSD works fine, I was able to boot it up and run everything fine prior to trying to do a fresh install, which in hindsight is stupid
I have just bought a brand new hard drive due to my last ones controller failed.
Western Digital Caviar Black 500gb
So the problem,
Did a fresh install of win 7 (Build 7229) two nights ago, all installed perfectly, next day (yesterday) went to boot up pc and had the dos error message - Disk boot failure, please insert system disk and press enter.
My first impression was it may have been an install failure, so i formatted the hard drive and reinstalled. shutdown the PC and rebooted up and i had the same error message, now after this, i got my failed hard drive out and after a lot of faffing around, BIOS found it and it gave me the same error message.
Can anyone tell me what the problem might be. I have tried Windows startup repair, did not fix.
BIOS settings are
First boot device is Hard drive
second boot device is CD-ROM
(I have even swapped these around to boot from windows 7 and it just starts the setup procedure of installing windows drivers) I have even set boot order of HDDs so my main windows HDD is up top. Anyone got any clues.
im a user of original 64bit win 7 Home Premium . using Toshiba Satellite P755.i use core i7 2670QM 2.2Ghz with Boost. Nvidia GeForce GT 540M 2gb vRam. 4gb 1333hz ddr3 ram have Bluetooth. Wireless.1 partition of 640gb im using perfectly windows 7 with nothing fail. but im about to fail now because my windows system now are so crash.i never backup anything. but installing to many games at once.so the sistem start to crash after i dont have an antivirus for 2weeks. and my hardosk is about 36.0KB free of 600GB now the hardisk drive have back about 70gb after several delete.i buy a leptop with already installed fresh windows. So No Windows 7 DVD.firstly with the error 2203. internal error where i have limited in installing and uninstalling program that use windows Installer. i cant even install angry birds!when im trying to update several driver manually after windows update fail.My bluetooth start to fail, Showing error 43(Device Manager). then i rollback. it shows error 10.device cannot start. even if i restart windows 7 several times.i managed to clean this error 2203 with 1month google and trying several. BUT, it starting to be weird after that.So, after all this mess i've created. im starting to think for no more solution instead of FRESH SYSTEM INSTALL.
1 :i have no win 7 Home Premium DVD. can i download it at microsoft?
2 :i dont care if i loss ALL the data nor installed software. but i do care about the Driver in my Laptop ex:Nvidia Driver.
Intel Driver. i dont want to reinstall every driver back by googling for download because i may have missing something. can i backup it? all i wanted is just a fresh system with main driver or hardware. is there a way of doing it without fresh install if it more more easier then it. Such as downloading a fresh system restore .iso file? dont give me simple answer the give me headache, im not pro with computer
I have a Gateway T-1625 laptop. it has 2 gb of ram, 500 gb hdd, and an amd turion 64x2 processor. It came with win vista and am trying to upgrade to win7. I ran the disk, everything seemed to go fine, all the way up to setting the time and date. After the restart, it goes to "System Recovery Options" and asks for language. Next screen says "select an operating system to repair and click next. Only win vista operating systems are listed and can be repaired". My problem now is only win7 is listed. My options are to load drivers or next. I have read in a few places to load drivers, but i read them after trying to install win 7. I don't know where to look for drivers if that might be the case. If i click next, i get the "choose a recovery tool" and it states the operating system is win7 located on (C Local Disk. I have tried the startup recovery several times to no avail. When i look at the details, there are 10 problem signatures. The ones that look odd to me are the "Signature 1 SystemDisk" and "Signature 6 OsVersionMismatch". Like most idiots, i thought i could handle a simple installation and didn't bother to look for tips before hand, and now it's costing me.
I was having trouble migrating my OS to a new ssd and received the "Bootmgr is corrupt system can not boot" screen repeatedly after restoring from system image, kept happening so I just decided on a fresh install. Install went well and was fully functional (eg drivers and devices) yet when restarting after installing microsoft office, I got the "Bootmgr is corrupt system cannot boot" appeared and now cannot get the pc past this point no matter how many reboots.
I have a drive that was using PGP that has become damaged and will not boot despite trying 3 days of different fixes and repairs. I have a complete drive backup that will restore but when I try and boot after my PGP password I get 'Missing operating system'. Again I have tried decrypting and fixing but to no end.
I have another disk with a working and booting install of Windows 7 (same architecture etc) on. I have the entire contents of the non-booting system disk that I can access from the image of it.
If I booted into something like Windows Recovery or Live Linux environment, can I copy the entire contents of the non-working Windows 7 drive over the working one and expect it to work and then boot?
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
My work machine's HDD is on its way out. It currently has XP Pro x86 on it. I got a fresh new HDD and upgrade version of Win7 x64 Pro.
I booted from the Win7 x64 disc, it went through its whole install thing on the new HDD, and then when it got to the product key, it wouldn't accept the one that came in the box. I read on the web that upgrade versions must have XP or Vista already installed for it to work.
But, the 7 documentation says I have to do a Custom install if I'm upgrading from XP. A custom installation deletes whatever is on the partition, I think. So how can it work when upgrading from XP?
I have actually gone back and installed XP on the new HDD (that had its own share of problems, couldn't even get the internet connection working), and now trying to do a custom installation of 7 again. When it gets to the product key section, should I put in my original XP product key? Or will the 7 product key work this time?
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
I have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.i will include a dx diag and cpu z .txt file Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.Let me know if there is anything else I should include
I had a lot of trouble with blue screens on this system (as per profile) with a previous installation too, but never got round to dealing with it properly. So now, it's a less than week old installation that I've put very few things on yet, but crashes a *lot* when I try to run games. Does blue screen outside of this, just not as much.
The error codes vary, but most common is IRQL_LESS_OR_NOT_EQUAL.
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
A new Samsung 840 pro SSD is on it's way with the courier and I will remove my present OCZ and will install a fresh Windows 7 pro. At present I have the SSD divided in 2 partitions C:system and D:Programs my first question regards the opportunity to keep the 2 partitions: is it good or bad for the SSD?
1) make an iso of partition D:programs 2) remove OCZ econnect the Samsung SSD 3) Check Uefi bios if AHCI is marked 4) Install 7 on C: (automatic alignment od the SSD) 5) Create partition D:
??Optimize?? Is it better to do it at this stage? Or after having installed various programs? I think at this stage but would appreciate your suggestions including what sort of optimization is advisable. I could eventually use RT7.Then I would copy from the iso all the programs on their own place D: and from the various distribution files will make the various setup (just for the programs to be registered in the Registry)
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
It all started when I was using Revo/Uninstall to uninstall Office 2010 from my hard drive. I'm running Windows 7 Home Premium. I have installed a licensed copy of Office 2007 (Student Edition), which was working just fine. Revo identified 2 registry entries that I believed applied to 2010 that could be deleted as part of the uninstall procedure. I told it to delete the entries and then, having second thoughts, I canceled the uninstall. I saw, however, that the icon for Office 2010 had disappeared from my list of "All Programs" (although certain related Windows 2010 icons still remain.I attempted an "System Restore" only to find that the "System Restore" function for each of my hard drive partitions was set to "off." When I tried to turn them on, I got the following messsages.
I've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
I wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
my computer is about 2 years old. It first came with Windows vista 64. A few months ago I got a hold of a copy of windows 7 pro 32, so I wanted to check it out, even If I was going to take a hit on ram. Well now I have Windows 7 Ultimate 64, but after doing a fresh install I kept getting BSOD after the windows logo. I was able to complete the setup after removing all my ram except for one stick. The same problem persists after setup. I can boot up in safe mode just fine with all of my ram.
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all.. Ive also tried to change my PSU to a different brand, but all volts seems ok. I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
I installed Windows 7 64-bit on my Dell XPS l501x and managed to find most of the drivers, but still have a couple of annoying little issues. Windows no longer tells me when my battery is nearly dead, it just dies when it's empty. Before the full restore I would be warned twice and then it would hibernate to give me a chance to find a plug. I still have one Unknown Device in device manager and I have no idea what it could possibly be as things generally seem to be running smoothly.Is there any way I can find out what this is?
So my XPS caught fire and my mom gave me her old computer as she got a new one.i threw some good parts from my XPS into this Dimention 8400 so it has better specs to run windows 7.3GB of ram and my X800XT radeon videocard and the 3.0GHz HT 64 bit processorNow i installed windows 7 32 bit ultimate from my XPS and it takes 20 seconds to get to the logon screen, but after that once you log in the "Loading" screen takes 3-6 mins along with once the desktop shows up it takes another 5 mins or so to even press the start button and bring the start menu up, 45 seconds to 2 mins to bring the internet up and this is a FRESH install, as of like....20 mins from this post it finished installing. not even activated yet
They used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
I'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
A few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
