My husband's laptop had an issue. When that issue occurred our father in law created a stack of back-up discs. My husband had 100s of music CDs loaded on his laptop. so these recovery discs include all that music. He had his computer system restored by Geek squad with windows 7. But we can't figure out how to restore this stack of discs with all of his music. We've searched on windows help with no luck. He puts the disc into the e: drive and the files are visible. We don't simply drag and drop right?
I have just upgraded from 32 bit Vista Home Premium to 64 bit Windows 7 Professional. I did the custom upgrade and have a huge Windows.old folder that contains most of the files from my Vista setup. I forgot to save my Windows Mail files. I'm assuming that they are still in this folder somewhere. Is there a way to recover them to use in Outlook 2003 (its what my company still uses) or Thunderbird? I have tried a few methods to use Windows Mail in Windows 7 but haven't managed to get any of them working.
I install a new window 7 and forget to backup the EFS certificate and key form windows xp, then now i can't decrypt or open the data. someone can tell me how to decrypt or recover data , that data extreme important.
I recently reinstalled my windows 7 professional on my laptop after it began behaving strangely. I had backed up most of my files but I realised there was one folder residing on my desktop which I had forgotten.
My laptop was fried when it crashed during a BIOS update and I need to get the files off of it. I do not have a SATA adapter but I do have another laptop that I can plug the hard drive into (which isn't corrupted). Obviously I cannot boot the computer up since the Windows installation is going to differ but I was wondering if there was any sort of bootable CD software that I could run to recover files from the drive. The hard drive was running 64 bit Windows 7.
I am using windows 7 ultimate.Today I booted the computer and it went to a message that said preparing desktop. After windows loaded the normal software was present, but my customized links were gone and the default background was present. My files that were in my normal user folders were not present, but were later located in the users/username folder. I moved some of these folders to the desktop as that is where they had previously done. In the users folder there were 3 folders (public, my username and whatever the new default user was called). When I restarted the computer everything came back to normal, except the folders of files I had placed on the new desktop. I went into the user folder, but it only had my current user and the public folders.How do I recover the files from the desktop from the random corrupted profile that windows created which I can not manually log into? I searched for the files and the last record of them is linked to my user and says the shortcut is not valid.
I sent my laptop to a family friend for some free hardware repairs, but after discovering that my computer was highly infected with viruses the technician decided to save my data on an external hard drive and then do a reinstall/repartitioning of windows. I haven't installed anything on my laptop since getting it back, but have run testdisk, AOMEI partition assistant, and photorec from my external hard drive in an attempt to recover about 30 Gb of hidden and encrypted data that was housed in my Yo-Safe. I don't think the data would have been overwritten, but I haven't been able to locate it yet.
Rebootedmy laptop after latest Windows 7 updates. While closing it started installing latest service pack. Next time I looked at screen it had gone to a black screen scrolling white text. Each line is 'Recovering orphaned file xxxxx into directory xxxxx' has been doinng this continuously for an hour now with 2 or 3 occasional half second pauses. Any ideas what is happening and what I should do next?
After reinstalling a new coly of windows 7 i cannot find my pictures in folders windows.old.The strange think is that i cannot find the pictures and the files that where in a sub folder inside a directory. The capacity of my hard disk shows that files are not deleted but i still cannot find them.
I was working on my files when suddenly all icons turned into Adobe Reader icons. The suggestion was to uninstall Adobe Reader (I did), save Windows 7, then fix the registry, etc. or try to reinstall Adobe Reader. After three tries using a different browser and the icons reappearing all over the desktop, blocking all other items, I decided to follow Cnet suggestion to install FOXIT 5.0 Reader. I did and I can read all my files perfectly.I was afraid to mess up Windows 7, the Registry and who knows what else.
i have recently lost some files on my computer and was wondering if any knew how to get them back.i had some files saved on E: drive and when i check on them today the folders are all still there and named but they are empty and i don't know what has happened to them.there is nothing in the recycle bin so i don't know where they could have gone!
The default copy switch of robocopy is /COPYAT if you don't specify any copy options. This is the code I'm using:
[code]...
The RAMDisk.img file that I'm copying is a compressed image file. Now with that syntax /COPYAT will be used which means that it will copy all attributes of that file. Whenever I run this, I successfully copy the file but it doesn't retain the compression attribute of that file.
My old computer was on its last leg and so I went in to Geek squad so that they could back up most of my files, journal and my resume. Now that I have a new computer w/ Win 7, I tried to retrieve my resume from MS works and was unable to do so. Prompt came up to open tasks and go into History, but my resume is not listed. Can some one please help me retrieve my resume? They used Roxio software and so I have 2 discs
i have a 4gb flash drive which i would like to use to back up my files.the trouble i am having is when i am backing up the files a message comes up select the location to back up files. it gives 2 locations one your hard or second drive, second choice is select a dvd drive to save files to disc.i have tried to find the usb drive so i can save the back up to the flash drive but to no avail.
My computer runs Windows 7 Home Premium.I have been going through my Library directories, (in particular my Document directory), doing some housekeeping. You know the procedure, deleting old files which are no longer relevant and deleting stuff that I no longer want and stuff that somehow I have repeatedly located in different directories, getting everything rationalised and organised.The sort of files that I am deleting are Word and Excel files, .pdf Adobe files, downloaded program files that I scan prior to installing, zip files and folders and folders containing files - nothing out of the ordinary really!A couple of days later I notice those damned files that I know I deleted, (and I made sure that the Recycle Bin was cleared out too), have all somehow been reinstated to exactly where I deleted them from.I do perform a backup to an external hard drive once a week. The drive is a Seagate and I am using the Seagate backup software, but this shouldn't be causing this - should it? I'm only backing up, I'm not asking for it to restore anything.
I'm going to be a university student at Indiana University in the fall, so during orientation I picked up a student version of Windows 7 Ultimate for my HP Compaq laptop, which I bought back when Vista was brand new --I cant afford a new laptop right now, and the hardware is still good anyway. I will be upgrading from Windows Vista Basic.
My school's IT department recommends doing a "clean" install to avoid any software problems after the installation. I don't really know what the difference between a clean install versus a regular one would be, but I have the IT department's instructions on how to do a clean, custom install, instead of the standard upgrade. I want my computer to work well with the school's network, so I am fine with that.
The only thing that makes me uncomfortable is that they say custom upgrades delete all of my computer's files. I have external hard drive and did a complete backup this afternoon.All of my information is safely stored on my external terabyte. My only question is, how do I sync all of my files from the external hard drive back onto my computer after this is done? I want to make sure it's possible to put everything back on my computer before I go doing this custom installation and erasing everything.
I noticed that after installing SP1, when I subsequently went to run Disk Cleanup, I had 920 Mbs of "Service Pack Backup Files. Upon searching the web as to whether I could delete these 920 Mbs of files with impunity and whether I should, there were many differences of opinion. Since I have often been guided by Tech Support Guy, I thought I would solicit the opinion of all of you. While I do not really need the extra space that removal of these 920 Mbs would provide, since I have 54% of free space, I am just uncomfortable with what I believe may be unnecessary files hanging around on my computer.
I've been having problems with Windows 7, then I formatted and that fixed the problem. However, is there a way to get my back all of my old files? If so, I'd like to know. I tried using the Emergency Backup and that recovered a couple of my old files. But there are still a lot of files that couldn't be recovered by the backup. Is there anyway I can recover other files that were lost when I formatted? I've tried a few things like Pandora Recovery and EASEUS, but they didn't do exactly what I wanted them to. They seemed to only be able to recover certain file types and not special file types. Any way I can restore all the files I had before I accidentally formatted?
My family's desktop has reset back to factory settings seemingly by itself. This has happened before but I was able to do a system restore and bring back all the settings, files, and programs. I tried the same thing today but the restore failed (it still failed after I followed its advice to turn the anti-virus off and then run restore) so I've got a large amount of files (pictures, music, documents) missing that I am hoping are still on the hard drive somewhere.
I have a very strange problem with a new Dell optiplex Windows 7 professional Pc I am using it as a file server. I keep getting messages in the shared folders. Access denied, file in use, You don't have permission. Something thinks these files are in use and they are not. If you reboot the computer they all clear but it comes back on different files. It is not a permission problem.
I purchased a Silicon Power Rugged Armor A80 external hard drive to back up my computer & I can't get it to work. When I try to back up MY Documents, it scans the files, then the window says "wrong input" & "access denied".I have been trying to get help from Silicon Power customer service, but they haven't been able to shed any light on my problem. I'm running Windows 7 Professional & have Norton Internet Security. Could there be some kind of incompatibility with my OS or Norton that's preventing access to the files?
I have taken many computers back to factory condition and never had any problems. This time, after backing up all my files to disc (15), in total, I have taken this HP laptop back to factory condition. There is no problem there. The restore is fine but I cant seem to load the discs I created. I have turned off the laptop completely, as directed and started it again with the alt f10 keys, which should automatically load my back up but nothing is happening and if I try to open the discs on their own, I get an error message saying that the path isn't there. I have already re-installed my various purchased software but it is the photos and personal files that I particularly want to get back. I have my own photos safely in a box but these photos belonged to someone else
Recently my laptop crashed beyond repair, and has had to be rebuilt. It now operates on Windows 7.Luckily I had backed up some important files onto a portable external Lacie Hardrive. I now need to return some of the files back to the laptop so that I can use them..but I can't seem to find a way to do it!! I suppose I'm just being 'thick'..but can anyone tell me how to do it.
My friend's laptop won't boot. You turn it on and the Advent symbol comes up and gives you an option to go into the BIOS or onto system recovery. It allows you to go no further. If you go to system recovery you can't even do anything, the typing cursor style thing is just flashing. He doesn't have the CDs to recover Windows 7 and restore it.Is there any way to restore? I also have an Advent laptop, would it work if I made a recovery CD from control panel for Windows 7 and then use it to boot and restore his Windows?
I was repartitioning a 3 NTFS partitioned 1,5tb drive down to one partition via win 7 Disk Management tool. I successfully shrank one of the partitions. After shrinking the second partition, win 7 had a hiccup and reported the remaining single partition is now in a 'RAW' format. I still have data on the drive that i would like to recover prior to reformatting it.Apparently, on reading up about "RAW' files, the data is still there. What i would like to do is to somehow view the data and extract portions of it at a time to other smaller hds. From what i has read i can only extract everything to another 1.5tb drive, which i just don,t have available. If i can find a solution, i will eventually reformat and reuse my 1.5tb drive.How can i extract portions of data from a "raw" drive to a second smaller drive?
My new laptop, after about 8 months of service, yesterday refused to be turned on again. No reaction to pressing the on button. The power supply seems to work. Before sending it for repair, I opened it and got the 2 HDs out in order to recodev some data using a SATA/USB adapter. Unfortunately, BOTH disks, when connected to another PC using the adapter, say that they need formatting. I tried to open a DOS window and typed : chkdsk e: /r It replied that the file system was RAW and chkdsk didn't work for it. When connected to a Linux PC, I can see the partitions but I could not mount them.
Not one of the smartest things I did but my mate gave me his old computer excluding the HDDs
So I installed my HDD into it and thought while I was at it might as well upgrade to windows 7 (From XP) since I had to reinstall the OS. I installed window 7 using the upgrade option and the HDD were cleaned. I left it for a while only to come back now an unbootabe computer..... I reinstalled having to go through the custom install. I can now log into the computer.
Is the data on my HDDs gone forever? Also the OS isnt recognising one of my HDD's?? (Maybe save it for another post)
If this isnt the right section please let me know where to repost