I'm going to be a university student at Indiana University in the fall, so during orientation I picked up a student version of Windows 7 Ultimate for my HP Compaq laptop, which I bought back when Vista was brand new --I cant afford a new laptop right now, and the hardware is still good anyway. I will be upgrading from Windows Vista Basic.
My school's IT department recommends doing a "clean" install to avoid any software problems after the installation. I don't really know what the difference between a clean install versus a regular one would be, but I have the IT department's instructions on how to do a clean, custom install, instead of the standard upgrade. I want my computer to work well with the school's network, so I am fine with that.
The only thing that makes me uncomfortable is that they say custom upgrades delete all of my computer's files. I have external hard drive and did a complete backup this afternoon.All of my information is safely stored on my external terabyte. My only question is, how do I sync all of my files from the external hard drive back onto my computer after this is done? I want to make sure it's possible to put everything back on my computer before I go doing this custom installation and erasing everything.
I have 2 hard drives in a Raid 0 configuration. On this configuration, I have 2 partitions, C and D. C currently has Vista on it.
booted from win 7 64bit disk. Select Custom. Select advanced options and highlight the C partition. All of the advanced options are greyed out (format, delete, etc).
If I select the D partition, all the advance options are available, but obviously I don't want to install to the D drive.
Does anyone have any thoughts as to why the options are greyed out on my C partition? could it have to do with the Raid 0? It came from Dell like this.
Is the time to "Upgrade from vista to 7 supposed to be way longer then it would to do just a clean install? (For example, hanging at 18% for a while while installing during upgrade).
I want to create a .bat or some self executable file that will clear my files on each shutdown or startup. Like all temp folders, some files like desktop.ini, temporary files created by programs, ect.
apparently, the 300 GB of files from my previous OS are still on my harddrive, but I cannot find them. Yes, I'm missing the 300 GB on my HD when I click My Computer, but they're not in this fabled windows.old folder that allegedly has them. I've even used TuneUp Utilities to detect where the data is on my computer, and it can't find them. Bizarre. So, what's taking up all that memory, and, more importantly, how do I get to it?
I am trying to take ownership of some of my system files in order to grant administrative permission to change the name of the files and replace them with customized versions. Everytime I do this, Right after I take ownership and grant permission to ExplorerFrame, or any of the other files, I cant click on any of the other "edit" options to take ownership of any of the other needed files.
I just downloaded all of the Google Web Fonts and they were each downloaded into their respected folders, so instead of clicking on folder after folder and right clicking after right clicking and finally installing each and every font;
How can I create a command prompt (batch) file so the prompt can search the main folder where all the font folders are, grab any and all TrueType Font files and move or copy them into another single folder?
I was working on my files when suddenly all icons turned into Adobe Reader icons. The suggestion was to uninstall Adobe Reader (I did), save Windows 7, then fix the registry, etc. or try to reinstall Adobe Reader. After three tries using a different browser and the icons reappearing all over the desktop, blocking all other items, I decided to follow Cnet suggestion to install FOXIT 5.0 Reader. I did and I can read all my files perfectly.I was afraid to mess up Windows 7, the Registry and who knows what else.
i have recently lost some files on my computer and was wondering if any knew how to get them back.i had some files saved on E: drive and when i check on them today the folders are all still there and named but they are empty and i don't know what has happened to them.there is nothing in the recycle bin so i don't know where they could have gone!
My husband's laptop had an issue. When that issue occurred our father in law created a stack of back-up discs. My husband had 100s of music CDs loaded on his laptop. so these recovery discs include all that music. He had his computer system restored by Geek squad with windows 7. But we can't figure out how to restore this stack of discs with all of his music. We've searched on windows help with no luck. He puts the disc into the e: drive and the files are visible. We don't simply drag and drop right?
The default copy switch of robocopy is /COPYAT if you don't specify any copy options. This is the code I'm using:
[code]...
The RAMDisk.img file that I'm copying is a compressed image file. Now with that syntax /COPYAT will be used which means that it will copy all attributes of that file. Whenever I run this, I successfully copy the file but it doesn't retain the compression attribute of that file.
My old computer was on its last leg and so I went in to Geek squad so that they could back up most of my files, journal and my resume. Now that I have a new computer w/ Win 7, I tried to retrieve my resume from MS works and was unable to do so. Prompt came up to open tasks and go into History, but my resume is not listed. Can some one please help me retrieve my resume? They used Roxio software and so I have 2 discs
i have a 4gb flash drive which i would like to use to back up my files.the trouble i am having is when i am backing up the files a message comes up select the location to back up files. it gives 2 locations one your hard or second drive, second choice is select a dvd drive to save files to disc.i have tried to find the usb drive so i can save the back up to the flash drive but to no avail.
My computer runs Windows 7 Home Premium.I have been going through my Library directories, (in particular my Document directory), doing some housekeeping. You know the procedure, deleting old files which are no longer relevant and deleting stuff that I no longer want and stuff that somehow I have repeatedly located in different directories, getting everything rationalised and organised.The sort of files that I am deleting are Word and Excel files, .pdf Adobe files, downloaded program files that I scan prior to installing, zip files and folders and folders containing files - nothing out of the ordinary really!A couple of days later I notice those damned files that I know I deleted, (and I made sure that the Recycle Bin was cleared out too), have all somehow been reinstated to exactly where I deleted them from.I do perform a backup to an external hard drive once a week. The drive is a Seagate and I am using the Seagate backup software, but this shouldn't be causing this - should it? I'm only backing up, I'm not asking for it to restore anything.
I noticed that after installing SP1, when I subsequently went to run Disk Cleanup, I had 920 Mbs of "Service Pack Backup Files. Upon searching the web as to whether I could delete these 920 Mbs of files with impunity and whether I should, there were many differences of opinion. Since I have often been guided by Tech Support Guy, I thought I would solicit the opinion of all of you. While I do not really need the extra space that removal of these 920 Mbs would provide, since I have 54% of free space, I am just uncomfortable with what I believe may be unnecessary files hanging around on my computer.
I've been having problems with Windows 7, then I formatted and that fixed the problem. However, is there a way to get my back all of my old files? If so, I'd like to know. I tried using the Emergency Backup and that recovered a couple of my old files. But there are still a lot of files that couldn't be recovered by the backup. Is there anyway I can recover other files that were lost when I formatted? I've tried a few things like Pandora Recovery and EASEUS, but they didn't do exactly what I wanted them to. They seemed to only be able to recover certain file types and not special file types. Any way I can restore all the files I had before I accidentally formatted?
My family's desktop has reset back to factory settings seemingly by itself. This has happened before but I was able to do a system restore and bring back all the settings, files, and programs. I tried the same thing today but the restore failed (it still failed after I followed its advice to turn the anti-virus off and then run restore) so I've got a large amount of files (pictures, music, documents) missing that I am hoping are still on the hard drive somewhere.
I have a very strange problem with a new Dell optiplex Windows 7 professional Pc I am using it as a file server. I keep getting messages in the shared folders. Access denied, file in use, You don't have permission. Something thinks these files are in use and they are not. If you reboot the computer they all clear but it comes back on different files. It is not a permission problem.
I purchased a Silicon Power Rugged Armor A80 external hard drive to back up my computer & I can't get it to work. When I try to back up MY Documents, it scans the files, then the window says "wrong input" & "access denied".I have been trying to get help from Silicon Power customer service, but they haven't been able to shed any light on my problem. I'm running Windows 7 Professional & have Norton Internet Security. Could there be some kind of incompatibility with my OS or Norton that's preventing access to the files?
I have taken many computers back to factory condition and never had any problems. This time, after backing up all my files to disc (15), in total, I have taken this HP laptop back to factory condition. There is no problem there. The restore is fine but I cant seem to load the discs I created. I have turned off the laptop completely, as directed and started it again with the alt f10 keys, which should automatically load my back up but nothing is happening and if I try to open the discs on their own, I get an error message saying that the path isn't there. I have already re-installed my various purchased software but it is the photos and personal files that I particularly want to get back. I have my own photos safely in a box but these photos belonged to someone else
Recently my laptop crashed beyond repair, and has had to be rebuilt. It now operates on Windows 7.Luckily I had backed up some important files onto a portable external Lacie Hardrive. I now need to return some of the files back to the laptop so that I can use them..but I can't seem to find a way to do it!! I suppose I'm just being 'thick'..but can anyone tell me how to do it.
I have a new Windows 7 machine, and I copied all my data from my XP machine over my network (simple drag-drop in Windows Explorer). Now all of those files open as read-only, even though they have no read-only attribute set on them. This affects all programs and file types. My new machine has only one user account, administrator. What happened?
I want to upgrade a computer that is running Windows XP currently to Windows 7. I know that it is possible and that this computer is capable of running Windows 7, and I have the Windows 7 Home Premium Upgrade package. However, there was some damage done by a virus on this computer. The virus was removed, but there are System32 files that are damaged as a result. The owner of the computer had this machine custom built, and they don't have any of the disks for Windows or anything to try running a repair. I am wondering if running the upgrade will fix the problems with System32 files or if they will even be a factor in the upgrade.
I run my system on two partitions, one had XP and one 7 Beta. When i installed 7 RC1 i upgraded the XP install. This put all my files into a "windows.old" folder. All very well so far. All the files in this i can happily copy/cut and paste anywhere.
Except the files in My Music. This is a problem as i have a few 100 folders in there(each artist has a folder). The only way i can move (or even look in) them is to take ownership, which involves quite a lengthy clicking through dialogues. Fine for 1 folder, not for 300. I have tried running explorer in admin mode, in safe mode, whilst logged in as administrator (can i be admin any more times?!) to no avail. I get the dialogue:
"You need permission to perform this action.
You require permission from Jamie-PCJamie to make changes to this folder."
Oddly, Jamie-PCJamie is the user im using...
Im way too lazy to spend 2 hours doing each file individually so please come up with another way Thanks, Jamie
EDIT - SOLUTION!
Whilst writing this i had a brainwave - the user on my beta install had the same name. So i booted into the beta instead, and happily copied all my files over. As there's no feedback button any more im not sure how to report this quite large flaw, so feel free to suggest a way to do that. It's clearly not right as is, what if i had wiped my old install, as you usually would after installing a new OS...
i have a question. I downloaded the windows 7 upgrade and i want to do a clean install. is it possible to burn the files onto a dvd? or do i have to put them on a portable usb? the files that are on my desktop are setup1.box and setup2.box and Windows 7-HP-Retail-en-us-x86.exe
what and how do i burn these files? i need to boot with the files to do a clean install
I ran an upgrade with win home 7. I am the administrator. When I try to delete old programs, I get a message that reads require permission from Admin or trusted installer. How do I delete these programs. I put my password as an administrator when I logged in.
I have seen in the program files folder that windows sidebar is still there. I wonder, can I delete some old vista stuff that isn't used by 7 after my upgrade? are there programs folders like this that I can rremove? or Is 7 still using this for gadgets? I didn't do a clean install some I am not sure if these a reminents of old programs that no longer work.
