i have a question. I downloaded the windows 7 upgrade and i want to do a clean install. is it possible to burn the files onto a dvd? or do i have to put them on a portable usb? the files that are on my desktop are setup1.box and setup2.box and Windows 7-HP-Retail-en-us-x86.exe
what and how do i burn these files? i need to boot with the files to do a clean install
I can burn a normal audio cd, yet i can not get it to burn mp3's (data cd, also says for mp3's in software) i have tried a few burning programs and always get the same result. so i figure its a windows 7 issue.
View 3 Replies View RelatedNot sure where to put this but I have a folder with VOB files. How do you burn VOB files to DVD. Or should I say who makes a good program for this?
View 8 Replies View RelatedMy burner is PLDS DVD+-RW DH-16ABS ATA Device (16x). I'm running Window 7 64 bit with Intel i5, 4 GB Ram on a Dell Inspiron 620s desktop. Earlier I had no issues at all burning DVD-Rs. But all of a sudden when I try to burn videos I get "unspecified recorder error". I used the same brand media as earlier (Sony) and tried many different disks but to no avail. Tried Nero 8 & Imgburn, but both don't work. I can burn the same files to CD-R & DVD-RW. I can also burn data files to DVD-R but not videos & ISO. Tried restarting the computer & updating the driver. Just one time, the disk wouldn't eject & had to use a pin to manually eject. What could possibly have gone wrong? The burner's lowest speed is 6x,
View 2 Replies View Relatedi have a Studio XPS 435T/9000 with a plds dvd +-rwdh-16aas burner. the drive dosen't register on my hardware, and will not respond when a c.d. is placed into it. (Auto play does not work).i've downloaded several drivers for 64 bit from dell, but it conflicts when extracted. (Says i have a 64 bit system and will not work.)
View 1 Replies View RelatedThis tutorial will show you how to burn ISO & IMG files in Windows 7 without installing other 3rd part softwares.
View 0 Replies View RelatedI am having a problem with my Windows 7 Pro edition when burning data to a CD-RW.When I add new data to existing data already burned on the CD-RW, the data has been written correctly to the disk, but when I view the disk after writing the new data, I never see the new data...the only data I see is the data that was written to the CD-RW at the FIRST burning. When I place my CD-RW in my other computer with Windows XP, all the data appears...initial burning and all subsequent burnings; place it in my Windows 7 CD drive and NO secondary data is showing.In one program I have for burning, I actually get a dialog box saying "the data has been written correctly to the disk, but the number of files does not match the expected file count. Most likely, the file system structure has not been written correctly and some files will not appear on the disk." What is going on with this "file system structure has not been written correctly?"This is a new wrinkle in the sheet for me. I have 5 CD/DVD read/write drives, and they all work the same...only initial files show and other files are not visible when re-burning to a CD-RW. It is really a new Agatha Christie mystery to me.
View 2 Replies View RelatedI copy "My Doc" excel files and try to paste them to E drive folder to be burned onto a CD The files will not paste to E drive folder.Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intl64 Family 6 Model 37 Stepping 5Processor Count: 4RAM: 3884 MbGraphics Card: Intel(R) HD Graphics, 1718 MbHard Drives: C: Total - 588476 MB, Free - 524956 MB;Motherboard: ASUSTeK Computer Inc., U52FAntivirus: Trend Micro Titanium 2012, Updated: Yes, On-Demand Scanner: Enabled
View 14 Replies View RelatedToday, i was trying to burn an ISO today when i got this message."The image didnt burn burn because an error occurred. The drive reported that it is performing a long-running operation, such as finishing a write. the drive may be unusable for a long period of time. (Error code: 0xC0AA0207)"Haven't started a write since my computer turned on.
View 1 Replies View RelatedI tried installing the upgrade build 7057 over 7000 (x86) and it seemed to work fine. But then Windows 7 boots into the message "preparing your desktop for first use". It follows the message "Setup will continue after restarting your computer" and after ca. 1 Minute it restarts and does exactly the same. I tried that for about 5 times and it keeps doing that. No error messages.
Did anybody have this problem as well? Any ideas for troubleshooting?
Addition: I have just seen that people have problems with Norton 360, which I have installed, too. Maybe I can boot into safemode and remove Norton - I will try this tonight and report.
I burned a CD over the weekend and ever since I can't delete the two files that are in the E:/ drive. It says the files are in use by another program but nothing else is running. There is supposed to be a file that stores temp. files when burning but I only get as far as C:/users/"my user name/?
View 7 Replies View RelatedWhat is the best free program that can copy discs to ISO files and also burn them, even if they are copy protected?
View 4 Replies View Relatedthe movie plays on the computer with sound but when burnt to dvd no voice
View 1 Replies View RelatedWent through the recommendations for upgrading to windows 7 as per instructions on CD. Anything incompatible was removed, uninstalled prior to set-up. On first run through set-up failed, BUT, this was easily rolled back. Not so easy the second time round where there was no option to roll back. On rebooting I could not access any of the software programmes on the pc. Instead I was taken straight to the command screen:
X:$WINDOWS.~BTWindowssystem32>
The only access I have to all my directories is via this screen.I did attempt to a system restore but was asked to identify which system to restore and was unable to do that as I am not very technical.I can, by hitting F8 get to the advanced boot menu, but none of the options listed there function. When selected they take me back to the command screen. If I exit the command screen the pc reboots.Is there any way I can get to restore my previous o/s Vista and then hopefully I can get to do a clean install of windows 7? it currently looks like I am running two opeating systems and windows.
I am trying to use this variable which I thought was standard for windows, doesnt seem to work for me.went to enviromental variables and added it to the system variables first (did not help) and then the user variables (nothing
View 2 Replies View RelatedMy company provided us with a link so we can get a discounted copy of office 2010..This one guy doesn't matter if he downloads the copy from microsoft's site or the cd copy he received in the mail. The install isn't clean so sometime during the install I get a message saying" ms-office professional plus 2010 encountered an error during setup.Error 1706: setup cannot find required files. check your connection to the network or cd-rom drive. for other potential solutions see c:program filesmicrosoft officeoffice10setup.hlp users machine has windows 7 home premium 32 -bit os, its an hp pavillon DV6000.
View 2 Replies View RelatedI have a copy of a Windows 7 setup disk here. Is there a way to determine whether it is 32-bit or 64-bit by examining some of the files on the setup disk? If so, how?
View 9 Replies View RelatedI've been trying to install Windows 7 for days now...with no luck at all so far...and I'm getting quiet frustrated as you can imagine.
The installation always stops after the installer loads the files, screen freezes on the windows logo, and the progress bar stops immediately stops moving (or it freezes even before the logo is even fully displayed). The DVD then stops and no matter how long I wait nothing happens from there. If I run the text mode install, it stops on disk.sys.
I've looked everywhere on the net and tried many things:
unplugged anything not necessary during install (all usb, got rid of sound card, tried another graphic card, removed ram, switched ram position)
cleared cmos, no change
bios: disabled all unecessary (floppy (I don't use any) enabled/disabled parallel/serial port (for some it was a fix on other mobo's...or so I have read), messed around with lots of settings
tried other DVD drive, burned another DVD.
Now this issue isn't new to me, since I have never been able to install vista either. xp and ubuntu gave me a lot of problems too, but with xp pressing F7 during the initial loading would solve the issue and the install would run fine, on ubuntu adding no acpi would also allow install. With vista and windows 7 setup, pressing F7 during the file load doesn't apparently work, and I don't know how to bypass the acpi check.
If I try to run the install within xp, I get a compatibility report saying that my computer isn't acpi compatible...while the k7s8x bios clearly says it is. I tried enabling/disabling the acpi in the bios and it makes no difference (my bios is the last available, the 2.60)
I have seen people asking for k7s8x lan drivers for windows 7 on this forum, so I guess it is possible to install vista/windows 7 on this mobo after all.
Any suggestions welcome, as I'm completely out of ideas now!
So I just built my new computer and fired up my Windows 7 Ultimate 64-bit disc. The setup files load, the Windows logo video plays, the pretty blue screen with the flowers in the corner appears and my cursor has the rotating green circle indicating something is happening.
Then the circle stops spinning and disappears. At this point it appears the installation freezes. Pressing any keys or moving the mouse does nothing. I have to restart the computer. Same thing happens. Any off-the-bat suggestions before I start troubleshooting hardware?
My hard drives are in a RAID configuration per the M/B controller and a mirror volume has been created on the disk. I have one IDE DVD rom drive (the only part of the computer that's not brand new) and one additional HD audio card installed. The system is stable in the BIOS.
How to set up automatic deleting files from specific folders. I know there is a 3rd party software, but was wondering if I can do it directly thru Windows 7 options?
View 2 Replies View Relatedmy desktop pc is windows xp, no worry i got bluetooth dongle heremy laptop is windows 7, integrated bluetoothhow do i setup bluetooth connection to both of them which i can play lan games (1 vs 1)
View 9 Replies View RelatedI set up a standard user on my laptop but they can view/edit/delete ALL my document folders and files. How do I stop that (so they can only see their own)?
View 3 Replies View RelatedHow to set up a secure portion or drive on my pc where I can hide files to secure them. I have had so many problems with PC hack I just got a new pc and it is starting again. How to search for the entrance they use would be great !!! I have a mirage of YouCam Cyberlink and I don't know what that is either? I am would like to lock this pc down --- I am running Norton 360 . I have windows 7 HP pavilion g4 it is a go between because my other PC was beyond repair --- in regards to security I threw it out !!!
View 7 Replies View RelatedI enabled the Admin account and wanted to set password but it put up a warning that doing this would erase all EFS encrypted files, personal certificates and stored passwords for web sites or network resources. To avoid losing data in the future ask the Admin to make a password reset floppy disk. What the heck does that all mean? Is there already one on it set up by default?
View 1 Replies View RelatedI recently set up a new Systemax SYX-1113 PC with a SSD (C:) for Win 7 Pro and a 1TB HDD (G:) for my user libraries and programs. I need to upgrade the HDD from a 1GB to a 2 GB drive so I cloned the 1TB (G:) drive to a new 2TB (H:) drive. My new challenge is figuring out how to switch the drive letters on the two HDDs so that Windows looks to the new drive for the user directories and program files. I tried using disk manager in Windows 7 and got the BSOD - I guess it didn't like me changing the location of the active user profile. I assume I need to boot the PC from something other than the C: drive to make the change.
View 5 Replies View RelatedI have a new Windows 7 machine, and I copied all my data from my XP machine over my network (simple drag-drop in Windows Explorer). Now all of those files open as read-only, even though they have no read-only attribute set on them. This affects all programs and file types. My new machine has only one user account, administrator. What happened?
View 7 Replies View RelatedI want to upgrade a computer that is running Windows XP currently to Windows 7. I know that it is possible and that this computer is capable of running Windows 7, and I have the Windows 7 Home Premium Upgrade package. However, there was some damage done by a virus on this computer. The virus was removed, but there are System32 files that are damaged as a result. The owner of the computer had this machine custom built, and they don't have any of the disks for Windows or anything to try running a repair. I am wondering if running the upgrade will fix the problems with System32 files or if they will even be a factor in the upgrade.
View 7 Replies View RelatedI run my system on two partitions, one had XP and one 7 Beta. When i installed 7 RC1 i upgraded the XP install. This put all my files into a "windows.old" folder. All very well so far. All the files in this i can happily copy/cut and paste anywhere.
Except the files in My Music. This is a problem as i have a few 100 folders in there(each artist has a folder). The only way i can move (or even look in) them is to take ownership, which involves quite a lengthy clicking through dialogues. Fine for 1 folder, not for 300. I have tried running explorer in admin mode, in safe mode, whilst logged in as administrator (can i be admin any more times?!) to no avail. I get the dialogue:
"You need permission to perform this action.
You require permission from Jamie-PCJamie to make changes to this folder."
Oddly, Jamie-PCJamie is the user im using...
Im way too lazy to spend 2 hours doing each file individually so please come up with another way Thanks, Jamie
EDIT - SOLUTION!
Whilst writing this i had a brainwave - the user on my beta install had the same name. So i booted into the beta instead, and happily copied all my files over. As there's no feedback button any more im not sure how to report this quite large flaw, so feel free to suggest a way to do that. It's clearly not right as is, what if i had wiped my old install, as you usually would after installing a new OS...
I'm going to be a university student at Indiana University in the fall, so during orientation I picked up a student version of Windows 7 Ultimate for my HP Compaq laptop, which I bought back when Vista was brand new --I cant afford a new laptop right now, and the hardware is still good anyway. I will be upgrading from Windows Vista Basic.
My school's IT department recommends doing a "clean" install to avoid any software problems after the installation. I don't really know what the difference between a clean install versus a regular one would be, but I have the IT department's instructions on how to do a clean, custom install, instead of the standard upgrade. I want my computer to work well with the school's network, so I am fine with that.
The only thing that makes me uncomfortable is that they say custom upgrades delete all of my computer's files. I have external hard drive and did a complete backup this afternoon.All of my information is safely stored on my external terabyte. My only question is, how do I sync all of my files from the external hard drive back onto my computer after this is done? I want to make sure it's possible to put everything back on my computer before I go doing this custom installation and erasing everything.
I ran an upgrade with win home 7. I am the administrator. When I try to delete old programs, I get a message that reads require permission from Admin or trusted installer. How do I delete these programs. I put my password as an administrator when I logged in.
View 5 Replies View RelatedI have seen in the program files folder that windows sidebar is still there. I wonder, can I delete some old vista stuff that isn't used by 7 after my upgrade? are there programs folders like this that I can rremove? or Is 7 still using this for gadgets? I didn't do a clean install some I am not sure if these a reminents of old programs that no longer work.
View 2 Replies View Related
