Setup A Standard User But They Can See ALL Document Folders And Files
Oct 18, 2011
I set up a standard user on my laptop but they can view/edit/delete ALL my document folders and files. How do I stop that (so they can only see their own)?
I recently set up a new Systemax SYX-1113 PC with a SSD (C:) for Win 7 Pro and a 1TB HDD (G:) for my user libraries and programs. I need to upgrade the HDD from a 1GB to a 2 GB drive so I cloned the 1TB (G:) drive to a new 2TB (H:) drive. My new challenge is figuring out how to switch the drive letters on the two HDDs so that Windows looks to the new drive for the user directories and program files. I tried using disk manager in Windows 7 and got the BSOD - I guess it didn't like me changing the location of the active user profile. I assume I need to boot the PC from something other than the C: drive to make the change.
As much as I hate it I'm contemplating leaving XP behind. I still prefer XP but ..
Anyway the one BIG issue for me is my seeming inability to copy/modify files in user account folders ..places where I want to keep my many many years of archived emails, etc. This whole encryption thing for user settings really annoys me.
With NTFS and Share permissions is there any way I can allow a user to (in a specific folder):
- Edit and overwrite existing files (like a notepad file) But - Not be allowed to create new files or folders
I have spent quite a while staring at the special permissions screen. When reading about the meanings of the special permissions from the Microsoft, it says that the "Create Files/Write Data" permission allows for the overwriting of existing files but it also allows for the creation of new files. Is there some way i can have one without the other? Split the permission? I have also been told that there is a flaw to this as when you open a word document it creates a temp file in the folder where the word document is, and having permissions set this way would cause the word document not to be able to open because it couldn't create that temp file.
I changed a user from admin to standard after creating a new admin account. When I boot into the standard user, I am prompted by UAC for the admin password for 4 programs to start. All the programs are ASUS utilities that came with mymotherboard.I have checked the permissions of the programs and the User group has full control.Also, these programs do not show up in the MSCONFIG startup tab. I want the utilities to run but do not want to have to authenticate every time I boot
Tech Support Guy System Info Utility version 1.0.0.2OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bitProcessor: Intel(R) Pentium(R) CPU G620 @ 2.60GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 2RAM: 4002 MbGraphics Card: Intel(R) HD Graphics Family, 1809 MbHard Drives: C: Total - 942032 MB, Free - 861358 MB; D: Total - 11733 MB, Free - 1435 MB;Motherboard: PEGATRON CORPORATION, 2AC2Antivirus: Norton Internet Security, Updated and Enabled
I am unable to run some programs using standard user. Whenever I try to open it it asks me for administrator password. Is there a way I can run the programs from the standard user account.
I am running Windows 7 Home Premium 64-bit and I have a problem regarding User Accounts.Let's say I am account A on this computer. This is an administrator account without a password. When I went into the control panel,I demoted Account B to a standard user. Apparently, however, account B can simply change this setting even though she is a standard user. Is this true? Even when I set a password for my account, account B can still bypass it or demote me. Why is this?
I set up four Dell Computers with Windows 7 Home Premium. Used my administrative account to install software (Microsoft Office Suite), Microsoft Security Essentials, Ccleaner, and Malawarebytes. All programs installed properly. As these computers are going to be used in a public place by junior and senior high school students, I thought it would be best to set up a standard user account for each of the four computers. I have it set up but when I log in as a standard use (non administrative) all the programs that were installed are not available. Tell me if I'm wrong. I think the programs would still be listed in program files when the standard user is open. Can I go to each of the programs and right click to open and then be prompted to key in my administrative password. I would think this should allow the program to be run in the standard user desktop.
I occasionally come across some functions that I can't access through my standard user account. The latest one is Start/Default Programs/Set program access and computer defaults. It tells me I do not have permission, no opportunity to elevate rights, so I had to log into the admin account.
I tried starting Control Panel using Run as administrator and going in through there, did the same thing.
how to gain access in way that allows the UAC elevation?
I have Windows 7 Professional x64. There are three user accounts: Daddy - Administrator...this is my account; Child - Standard User; and Visitor - Standard User. (These are not the accounts' real names.)
I really should be a Standard User for day-to-day computing. There are two ways I could go about doing this, and my question is: Which way is better? Daddy will continue to be an Administrator. I will create a new Standard User account for myself. Daddy will transfer all my documents, pictures, music, etc. to my new user account; or I will create a new Administrator account and then demote Daddy to a Standard User. Are there particular pros and cons to these methods, or does it not really matter?
One thing I wonder about is that I have used the Daddy account to install certain software 'for this user only' (i.e., Daddy) . I did this for software that needs Administrator permissions and rights, such as my antivirus software. Will a new Administrator account automatically have this software installed, or will it have to re-install this software?
I have a user set up as a standard user. When that user double clicks on most of the executable icons nothing happens- not even a prompt to run as administrator.Parental controls for the user are turned off. If the user right clicks on the shortcut and then clicks "run as administrator" the prompt for the administrator password will show and after password entry the program will launch.These are simple trusted programs installed by an administrator such as Picasa, Irfanview, etc Standard users should be able to run these programs without issue. How can I change this.
I installed Win 7 64 and loaded all programs. Everytime I create a standard user account all programs that are installed on my administrator account transfers to my 2 standard user accounts and the guest account also. Even when I try to delete a program in my guest account or standard user accounts it deletes them in every account. What am I doing wrong.
i have this problem on two different computers running Windows 7 7201 (a notebook running x64 and a netbook running x32). even though i am able to install a second keyboard layout, the option to switch languages with a keyboard shortcut is disabled by default. i can go through the options and enable the left alt+shift shortcut, but as soon as i press ok or apply the shortcut setting resets back to "none".
for the original administrator everything works normaly, but when i tried to set the standard account as administrator temporarily, i still could not make the keyboard shortcut setting to work.
one workaround that i found on the netbook was to delete the standard account, setup the keyboard options for the administrator account, and select the option to copy these settings to any new accounts. after creating a new standard user everything works as it should, but it would be too much work creating a new account for my notebook and setting up everything from the begining.
i also tried finding a way to change the shortcut setting directly from the registry but i can't find any information about it either.
While moving my programs and records from an old XP-PRO system to a new Windows 7 system, everything went into my administrator account. How do I share things like internet explorer and the address book with all (or a specific) user account?
I recently had to reload windows 7. every thing seemed allright Untill I rebooted now it does not automatically connect to the internet. It will not let me troubleshoot it because I do not have administrator permission. It also does give me the run as administrator option on anything. It does not do me any good to switch to admin because everything works as admin. how do I give the system rights to networking.
I have set up a standard user account on my Son's laptop, but there are software programs I would like him to have access to, without me having to log on with Administrator ever time.When he try's to run said program it says Parental Controls has blocked this program the Administrator can grant access. I don't have any programs blocked under Parental Controls. Is there a way to grant access to certain programs without having to log in as administrator every time while using a standard user account?
why a "Standard User Account" can change the directory locations of folders to another drive, change the drive indexing options etc., but has to get an "Administrative" password to open "Real Temp" on the desktop?
I have just done a clean install of Win 7 Pro 64. I have set up four accounts and for each one I have moved the user folders to a separate hard drive by using the Right Click Properties > Location > Move. I have done this for the following folders:
- Desktop - Downloads - My Documents - Favorites - Links - My Music - My Pictures - Videos
I have done it exactly the same way on each account (and more than once! I've been imaging the disk and have restored backwards a few times.)
The problem is, on three of the accounts, when I move the My Music, My Pictures, and Videos then they do move correctly but three rogue folders appear named Music, Pictures and Videos. And I can't delete then since they are system folders.
But the weird thing is that this does not happen on one of the accounts!
how to get rid of the extra folders as they're cluttering up the users home folder and causing confusion.
In one of my user account( standard User account) i cant see folder icons ,thumbnails etc but iam able to see all folder icons etc in my admin user account? .even,my computer icon in desktop is corrupted and not properly visible.in windows explorer also,it is the same case.
Okay so i dont have access to any administrator accounts due to the fact that our admin forgot his password and the rest of us are standard users. So can we enable it as a standard user to use the admin account in safe mode?
We are implementing Windows 7 and Bitlocker as encryption. While this works brilliantly, I am now worried that our offsite engineers if they are given Local admin rights, can disable bitlocker. They need to install software onto there machines and this cannot be taken away from them. Problem is company policy also states that they are not allowed to disable the encryption, which is where my dilemma lies. I can lock down bitlocker through Grou Policy, but the offsite engineers are software developers so it wouldn't take them long to disable it if they do have local admins. Is there anyway at all I can give them access to install software without Local admins?
So I have an administrator account for maintenance purposes and I also have my frequently used standard account. Usually, when you right click on a program, for example: Spybot S&D There is an option to "Run as Administrator". And if you click it, it prompts for an admin password.but for me, it does not ask for an admin password, it just ignores the fact that I clicked that completely, and runs it as a standard user.
This happens whenever I need admin privileges for something. I cannot elevate my privileges on a standard user account.It used to work properly, until I changed my account type to standard, and enabled the Administrator account.
We have an application(Myapp.exe), which is runs under administrator account properly( as it edit/update/write DLL in registry). But due to to security resons we dont want to provide Admin password to all users, and we want to run application under Standard User ( member of Users group only).I did these setting in MyApp.exe.manifest<requestedExecutionLevel level="asInvoker" uiAccess="false" /> and linked in the file MyApp.rc as given below