I have set up a standard user account on my Son's laptop, but there are software programs I would like him to have access to, without me having to log on with Administrator ever time.When he try's to run said program it says Parental Controls has blocked this program the Administrator can grant access. I don't have any programs blocked under Parental Controls. Is there a way to grant access to certain programs without having to log in as administrator every time while using a standard user account?
I am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
I have always been running admin and even until now I run as admin. But, I have been doing a little bit of research and realize that using a standard account is a safer practice. I have never even used a standard account.Is using a standard account a better practice? Also, how does doing average task such as installing programs and updating work through the standard user account?
i start my pc up (from being off) and get logged into a temp user profile. It tells me that i cannot acess my user profile and all information will be deleted on logging out. I've looked online for a soloution but none work for me ,I really dont know how to resolve this problem,I have limited knowledge and computer skills. i really dont want to scrap this drive and start over.
I set up four Dell Computers with Windows 7 Home Premium. Used my administrative account to install software (Microsoft Office Suite), Microsoft Security Essentials, Ccleaner, and Malawarebytes. All programs installed properly. As these computers are going to be used in a public place by junior and senior high school students, I thought it would be best to set up a standard user account for each of the four computers. I have it set up but when I log in as a standard use (non administrative) all the programs that were installed are not available. Tell me if I'm wrong. I think the programs would still be listed in program files when the standard user is open. Can I go to each of the programs and right click to open and then be prompted to key in my administrative password. I would think this should allow the program to be run in the standard user desktop.
I occasionally come across some functions that I can't access through my standard user account. The latest one is Start/Default Programs/Set program access and computer defaults. It tells me I do not have permission, no opportunity to elevate rights, so I had to log into the admin account.
I tried starting Control Panel using Run as administrator and going in through there, did the same thing.
how to gain access in way that allows the UAC elevation?
In one of my user account( standard User account) i cant see folder icons ,thumbnails etc but iam able to see all folder icons etc in my admin user account? .even,my computer icon in desktop is corrupted and not properly visible.in windows explorer also,it is the same case.
Okay so i dont have access to any administrator accounts due to the fact that our admin forgot his password and the rest of us are standard users. So can we enable it as a standard user to use the admin account in safe mode?
So I have an administrator account for maintenance purposes and I also have my frequently used standard account. Usually, when you right click on a program, for example: Spybot S&D There is an option to "Run as Administrator". And if you click it, it prompts for an admin password.but for me, it does not ask for an admin password, it just ignores the fact that I clicked that completely, and runs it as a standard user.
This happens whenever I need admin privileges for something. I cannot elevate my privileges on a standard user account.It used to work properly, until I changed my account type to standard, and enabled the Administrator account.
I set up a standard user account on my desktop and it worked. I did the same thing with my laptop and when I try to enter a password in my standard user account on the laptop, it says the logon feature will not support it. Is there something I am overlooking seeing that it works on the desktop?
Ive accidentally deleted/disabled admin account through standard user.Now I cant get it back, so I cant run anything which needs admin right, even enabling admin account What now? I wanted to format partition and install windows again, but another problem, I get error that windows install process cannot find drivers for my dvd rom! LOL! but windows was already booted from that dvd. wtf.
I have a laptop with windows 7 and three different accounts on it. two of the accounts are just standard user and one is a administrator. On the administrator account you can print to my printer, but on the standard accounts you can't. I have made sure that the printer is set to be the default and it does list the printer but says it is offline.
for ACER 5740 G WIN 7 home premiumi enabled the administrator in WIN 7 Home Premium with a password and hide this for the log in. All other users are standard users. Now I am unable to login to the administrator log in opiton. How can I unhide the administrator log in. Since I did this I have administrator password.
I have a user set up as a standard user. When that user double clicks on most of the executable icons nothing happens- not even a prompt to run as administrator.Parental controls for the user are turned off. If the user right clicks on the shortcut and then clicks "run as administrator" the prompt for the administrator password will show and after password entry the program will launch.These are simple trusted programs installed by an administrator such as Picasa, Irfanview, etc Standard users should be able to run these programs without issue. How can I change this.
When I search for the words in the thread title I only get references to UAC.Well, I do not think I am interested in UAC.In Windows NT4 it was possible to take any existing account and modify/customize its access rights, per system function. As in allowing standard user Joe to be able to change date, whithout elevation. I could edit the account rights of Joe, giving or removing just about any system access.I need to be able to give some system rights to a local standard account, without elevation. No admin password, no UAC, nothing. At the same time that standard account should not be able to access local policy or computer management or similar, other, system features.
I wanted to create a new user with standard access and only give them access to my "C:" (programs) and not my "D:" (downloads) so after creating the user, I went to security settings under D: drive/properties and I denied "Authenticated Users". I obviously know now that that wasn't the right thing to do. After that happened, my admin account didn't have access to drive D. So I went back and switched it back to "Allow/full control" and my admin acct has access to my D drive now but there are files that are in the drive (not in folders) that are still showing denied when trying to open and 1 folder is also being denied. When I see the security settings on these files/folder it says "You do not have permission to view/edit...etc"
I am setting up a brand new laptop with Windows 7. I have not used Win 7 before. I have set up two user accounts, both "administrator" accounts. I have downloaded Google Chrome using one of those accounts, but when logged on as the second user, I cant see the Chrome shortcut, or find the program file. If I search for "chrome" or "chrome.exe", the result is "nothing found". Using File Explorer doesnt help, as that is not showing the program files under either user logon. I did not have this problem with Vista.
I installed a program to my main user account which is an administrator account. When I click on the program to open, the mouse pointer changes like the program is going to load and then it stops. I logged into my second user account which is also an administrative account and the program opens without any problems.
I've got a large program that I've installed on my wife's laptop, that I'd like to be available only when I log onto her computer. She currently is the only USER. I installed the program (it takes many discs to install, plus it has been customized post-installation) when logged in as her, and now I'd like to have my own account, and transfer that program to my account.
When you install a program from within Administrator account should it automatically be available from within the User account as well?I installed a program from within the Administrator account but when I go the the User account it is no where to be found.
am using window 7 ultimate. the thing is that, as an administrator, i dont seems to have full control of my pc. i can install softwares, cant delet some program files, cant make changes to my account name or type, cant manage other account and i cant install my system update. note. it shows a logo b4 (change ur account name,type,manege another account)
I am having troubl with changeing anything in my User Account Controls. Every time I try to access the tab I just get an error message saying that "Windows cannot find" followed by a long line of numbers. I am a little concerned as I noticed, according to Belarc Advisor, that I suddenly have a mysterious user on my windows called "UpdatusUser" and has apparently logged on 399 times!
Adobe CS6 suite was working fine when I crashed using After Effects. I now get crashes or locking when rendering in After Effects or Premier Pro. Adobe Media Encoder won't even launch. I created a new user account they all run fine (so far). Same thing on my old machine running CS4.
1) Fixing my original user account (registry edit? some corrupt file somewhere?)
2) Transferring or recreating all my accounts, libraries, shortcuts, etc. to the new account and delete the old one. Is there an easy way to do this? Currently using Windows 7-64 (Pro)
I'm creating a local group policy to lock down a Windows 7 Pro Workstation for use in the Staff room.It's the first time I've used it, previously I've worked a bit with AD. but I've been following on line tutorials and using google and I'm nearly there with it.But I'm stuck on one thing. My approach has been to remove access to pretty much everything apart from IE, Firefox and Skype icons on the task bar. I've got the start menu empty apart from the shutdown button, which is what I want but at the top of the start menu is the users icon/picture thing and if i click on it it takes me to "user accounts". I can't for the life of me work out how to get rid of the picture or just stop this happening.
i have accidently changed all my accounts to standard and cant change back to a admin account. i'm required to put in an admin password for permission but there is no where to put password.
I recently logged onto my account about 2 days ago to finish a project. The music file I used for the account was could not be found and when I went to locate it I was told I didn't have administrator rights. I went to Control Panel because I was sure I was an Administrator, but sure enough, I was set as a Standard User. I tried changing it up but it wouldn't change. I tried changing the account name also, and it wouldn't change. I could only change account picture. I can't open UAC, I click it and it blinks but nothing opens. I deleted any recent program installations,I booted in safe mode, however I was still not able to change my account,I tried activating the hidden administrator account but I received an "access denied" message,I tried creating a new account but I received the following message:"The specified account name is not valid, because account names contain the following characters: /[]":;|<>=+,?*Please type a different name."I didn't use any of those characters in the account name.I ran 2 different virus scans, and they came up with nothing,I turned the computer off, unplugged everything, and pressed the power button for 30 seconds, and rebooted, but still nothing!My roommate shares this computer with me, and her account is still an administrator. However she has traveled and I haven't been able to get hold of her yet. We share music files and the file I was trying to use is in her account.why my account was changed and how I can change it back?
I changed a user from admin to standard after creating a new admin account. When I boot into the standard user, I am prompted by UAC for the admin password for 4 programs to start. All the programs are ASUS utilities that came with mymotherboard.I have checked the permissions of the programs and the User group has full control.Also, these programs do not show up in the MSCONFIG startup tab. I want the utilities to run but do not want to have to authenticate every time I boot
