how to record the boot-up of a PC to video?i need to record some errors im having during start up and id like it to be better than using a Camera Ive got Camtasia but the errors happen befor I can get Camtasia Started?
View 2 Replies
I want to video record my working steps in my screen. Is there any windows built-in tool I can use to video recording my computer screen ?(Yes, I know there is other alternative to do it, suhc as ask my mum to hand-held my camera to capture my screen during I am working. But the quality is no good, blur and shaking all the time.
View 9 Replies View RelatedI have a MiniDV video camers, the only output it has is 3.5mm jack to R/W/Y composite, My mobo is an Asus P5Q Pro Turbo so have o way to plug directly in, does anyone know of a cheap way to got the job done?
View 3 Replies View Relatedhow can we record vedio from Hd tv to pc tv is compatible to perform pc & tv differently?
View 1 Replies View Relatedi have an Alienware M17X R3 with an HDMI INPUT which i can plug my xbox 360 into and play it through my laptop monitor. Is there any software that will allow me to use the HDMI IN as the primary video input, in oppose to the actual desktop screen? i tried using a few free softwares in which it records the "HDMI IN ON" message that shows up, but when it goes away and when I see my dashboard, the recording software sees my desktop image. i do not have a capture card, nor do i want to use one. i simply want to use a software (if there is one) to capture the HDMI IN on my laptop.
View 6 Replies View RelatedWhat is master boot record(mbr)? Could anyone please tell me about it and its function.
View 3 Replies View RelatedI have 2 HDs in my tower, 1 has windows 7, and 1 has server 2008 R2. I installed the server OS to play around with Hyper-V but enver did and I want to remove it to throw a linux distro on it. What's the easiest way to fix the boot record to reflect that server 2008 isn't there anymore?
View 2 Replies View RelatedToday I just used a removal tool by Symantec to remove the virus Tidserv Activity on one of my laptops. I restarted the computer and it wouldn't boot. Now I need to restore the MBR since the MBR was infected.It's a Dell laptop. I found that the laptop has System Recovery preinstalled. The instructions Symantec gave me to remove the virus says to use the Windows 7 CD-ROM to restore the MBR, which I don't have.I do however have a Windows 7 re-installation DVD, if reinstallation makes a difference.Can I use the re-installation DVD and is that safer? Or is it okay to just go to System Recovery since it's already pre-installed?My third question is after I decide which way to go about tackling this issue, how do I manually restore the MBR? I've faintly entered "fixmbr" command in the command prompt but it didn't work, basically saying it wasn't a valid command.
View 13 Replies View RelatedHave a PC with Windows 7 on it. First hard disk with Master Boot Record failed (had an install of windows xp on it) - have now removed faulty disk, but PC will not boot due to Master Boot Record not being on second disk.How do I go about re-creating the MBR on this Windows 7 install disk ?Tried googling, and as usual nobody seems to have a quick / easy fix - and tried Windows 7 repair options, doesn't work (doesn't even recognise Windows 7 is on the disk).So, I have a non-bootable PC... with access to other PC's and laptops around me (also with windows 7 on), so could plug the disk in to one of those via usb dock station etc...
View 9 Replies View RelatedRecent update installed was Itunes with a google toolbar.Started getting adware warnings and saw some kind of "adware/malware doctor" asking to update on the pc. When I went to deinstall it as I could see it in the programs list, all hell broke loose and now my machine doesn't boot.
View 4 Replies View RelatedThe Master Boot Record, How do you protect this from being damaged or corrupted and even from a virus attack.Can you back it up in some way , or do you need a backup and recovery program for this.
View 6 Replies View RelatedI downloaded EasyBCD 2.1.2, used it to recognize EVERY boot record, deleted the MBR on the old HDD, and rebooted.Now, the system boots straight to the new HDD without prompt from bootloader (which is good) but still requires the presence of the old HDD (I disconnected it, alas...)In the end: I called and told the customer that "I'd be happy to GHOST all her data and slap a fresh Windows 7 install on the new HDD (with a fresh/whole MBR) and then drop all her data back onto it. However, this would require more time; the other option being that she accepts the machine for what it is, perfectly functional minus the dependency on the old HDD."have considered this option, but I found ZERO indication of the old HDD failing, other than "BAD" written on the drive with Sharpie. The customer was happy yesterday and accepted the current state (she didn't want to invest more time/money into it) but today when she picks it up she isn't happy because she was told four months ago that the drive was bad and now I'm saying I don't see an indication of it. Other than pulling the data, installing fresh OS, then dropping data back on; or not installing OS with two drives present in the first place?
View 4 Replies View RelatedHow to Restore the Windows 7 MBR (Master Boot Record) ?
View 0 Replies View Relatedi have 2 hard drives 1 with win 7 beta but strangley i cant boot the final ver of windows 7 so im installing it onto the 2nd drive, and make it my main boot, now if i want to remove the beta boot record will i lose my files on that hdd.
View 2 Replies View RelatedI just want to delete the MBR on both my hard drives. Why? Because I want to. I'm going to delete my MBD and then I'm going to do a quick format of both of my whole hard drives. That's all I want to do.Will not give a clear direct answer to HOW THE @&$* DO I DELETE MY MASTER BOOT RECORD.I DONT HAVE FDISK. I DONT KNOW WHERE TO DOWNLOAD FDISK! I TRIED FDISK COMMANDS ON A COMMAND PROMPT - NOT RECOGNIZED!f anyone here can just tell me in the most simple way how to delete the master boot record on both hard drives...I can't believe there is no utility to do this...should be a utility called "Delete MBR" in my honest opinion.
View 6 Replies View RelatedI'll get right to it cause this is serious for me and I screwed up royaly. My original OS Windows 7 was on a normal hard drive and I installed a second copy of Windows 7 on a new SSD drive that I got and used it as my primary and left everything on the old one just didn't delete it. When the time came for me to finally say bye bye to all the previous items on the former drive since I was now using the SSD for OS and applications I formated using the Windows 7 startup disc. I cannot boot from the SSD nor does it even show in Device Manager (I'm gonna check the connections for that) This information is still recoverable I know but what's the best way to go about it. Will I be able to use the SSD to boot widows again if I repair this one thing? Can I at least get my files back somehow?
View 1 Replies View RelatedI had a very strange problem today when I was waking my machine up from hibernation. Here's my set up:
Windows 7 x64
Windows 7 is on a SSD drive
Apple Mac Pro
I also have two other drives in, one for OSX and one with an old Vista x64 on it. I mainly work in Win 7, I never shut this computer off, I just restart sometimes. But today I put it in hibernation. When I was supposed to wake it back up the win 7 drive had just disappeared. I booted in Vista 64 and had a look in the disk manager, it tells me that the SSD drive isn't initialized (see attached screenshot).
As you may guess I can't browse this disk, and it does not show up during boot up. I did try to start from the Windows 7 CD and do a recovery, but it can't find my Windows 7 installation and so I guess I can't repair. What I could try to recover? Since I can boot my old OSX and my old Vista I'm quite sure it's not the rest of the hardware, I figure it's the Windows 7 drive or maybe its MBR.
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies View RelatedHave a custom made desktop running 7 32bits on an Intel DG43NB board 4GB and a Q0650 processor.I recently acquired this machine for nothing and changed the thermals and did a good clean up and it has been running fine as my tester until last night when I booted it went to get a coffee came back to find a blank screen and the CPU fan running full tilt. Rebooted and the machine starts up then stops > three beeps > machine starts up again and runs full tilt again. There is no video - have tried the DVI and the AVG output out of the card and the mobo connections so I cannot get into BIOS to see if there is a problem there. Being three beeps I thought memory so change it for same - another brand - no differences.Took the CPU cooler off and powered on an the CPU started to get warm but not so much as one could not keep your finger on it. Reinstalled the CPU with AS and replaced the original RAM - no change.Has the mobo crashed for some reason or is there another thing I could check? Perhaps the PSU volts as my mate suggested?
View 8 Replies View RelatedI have an XFX motherboard (x58i), model # MD-X58I-CH09. It has three PCIe slots. I have an Nvidia GEForce GTX 260 graphics card in one of the PCIe slots (middle of the motherboard). This is running two 22" displays with no issues at all.
I also have a Asus ENGT430 video card with HDMI output that I want to load into one of the other PCIe slots. When I do this, the computer will not boot properly. It starts (displays the splash screen for windows7), but after that it appears as if there is some sort of conflict. Probably a driver conflict but I cannot even see anything or log in to the PC. Will the mother board support two different graphics cards? If so, what do I need to do to get it to work. I have not installed any drivers for the ASUS graphics card because the instructions have you do this after booting. With Windows7 I didn't think I would have to install anything.
My Toshiba Satellite L750 laptop has been having trouble playing Flash video, and Windows takes an extremely long time to boot. Flash videos appear to drop every other frame at best, and the sound in every Flash element is extremely loud and distorted. When Windows boots, it appears to finish booting in a reasonable amount of time, but the antivirus software and some minor background processes do not load along with Windows. They do not load until two minutes after Windows appeared to finish booting. During this two-minute period, there is no CPU or hard drive activity. These two problems have occurred since Toshiba reinstalled Windows during their many attempts to repair this computer. This is the same computer that I started this topic about. What did they do to this computer?
View 14 Replies View RelatedIm running into a very strange situation.
Im running 7 Ultimate on a Lenovo 3000 N100 Laptop that I use for work.
Originally I had the RTM that i revieved from work (HP). Once 7 was released to the public I purchased the Ultimate anytime Upgrade to make my copy of 7 my own. Here is my issue, With the RTM installed I had no problems. But once I entered my new key I started having boot problems.
Every other boot, when I get to the login screen It seem that my graphics driver and my touchpad driver did not load and I must shut down and reboot.
when I reboot it then works fine. i have done a Fresh Install 3 times,
Downloaded updated drivers for my chipset, graphics, and touchpad. Could it be a BioS issue?
I was wondering if anybody has ever encountered this or knows how to remedy this.
I was updating video driver for radeon 4750 through Steam and all of sudden I got a bsod.. should've wrote it down but instead I just tried to restart. It freezes during windows logo screen and when I try to boot on safe mode it gets stuck loading atipcie.
View 5 Replies View RelatedMy OS is Windows 7 32 bits. I checked base video in boot option in msconfig and also checked make all boot settings permanent. So my window always boots with low resolution mode. Therefore I rechecked base video, checked all boot settings permanent, applied, ok and then restarted the windows. OK. Windows is starting, that's ok yet. My screen resolution is normal. And then My startup programs started, after a few seconds, My screen resolution changed to low immediately. I think I can't disable base video mode in msconfig.
View 3 Replies View RelatedI have been using the MC in win7 to watch Live TV and it has been working fine. Then one day, I go to turn it on and I get a blue box that says "CANNOT RECORD" with an ok button. Press the OK button and noting happens. Meanwhile the TV is playing perfectly fine behind it. how to get rid of the box?
View 1 Replies View RelatedI just purchased a new video card for my old Acer M3100 that I dual boot the original Vista and Windows 7 on. I bought a new Asus Nvidia GeForce GT 610 video card to play Skyrim. Windows 7 will install the drivers with absolutely no error messages but upon rebooting they won't load and I'm stuck with basic VGA. I booted out and back to Vista and loaded them and they installed fine as well and upon rebooting into Vista they actually load! My Windows 7 install is a recent clean install because I tried upgrading to Windows 8 and didn't do a clean install and it borked itself on all my legacy hardware. Does anyone know why a clean install won't load new video card drivers but my old Vista install loads them fine? (Yet another reason not to abandon the Vista Beast, Vista is the last OS that recognizes my (2) Rio Karma MP3 Players.)I downloaded the latest drivers for Windows 7 Pro 64Bit directly from Nvidias website and installed them and still get a "No GPU detected" message when trying to run the NVidia software that comes with the drivers.
NVidia Driver Version: 306.97
I have Windows 7 and have successfully recorded sound clips using the Accessories Sound Recorder. Next time I recorded a sound I carelessly plugged the mic into the earphone socket. Naturally I was unable to play back a previously recorded sound so I fiddled with the settings (I'm descended from a long line of idiots). Then the penny dropped and I plugged the mic into the correct socket, now because of my fiddling I can't record clips that will play back. I can play back my earlier clips.
View 7 Replies View RelatedIs there any way I can record a series, have it record the reruns, but have it not record the same rerun twice? That way I can catch up on series that I have missed and not have to delete multiple episodes.
Maybe it does this automatically as I haven't recorded much yet, but I'm just making sure.
I cannot record some of my Recorded TV content to DVD as I get an 'Unsupported File Type' error when trying to do so in Media Center. But other Recorded TV shows burn fine without this error.
Is anyone else experiencing this issue and know why this is happening?
I'm using Windows 7 RC build 7100
i'm using vlc to record a part of my favorite videos so i can upload them on Internet. there's a small problem, when i try to record hd videos i get a crappy quality, however the original video has a very good quality, consider the following video:
the original video, the one that i record this part from is having a very good quality (hd 720p), it's in mkv format and i guess it's x264. why do i get this quality?
i did the same thing with a non-hd video and it worked better: how can i record with the best quality? at least a quality as same as the original one?
I have an HP laptop with built in webcam and although I've use WMP to record myself there's no recording of sound. My computer plays the sound and it works well with skype.
View 9 Replies View Related
