Master Boot Record (or Partial) On Separate HDD
Jun 26, 2012
I downloaded EasyBCD 2.1.2, used it to recognize EVERY boot record, deleted the MBR on the old HDD, and rebooted.Now, the system boots straight to the new HDD without prompt from bootloader (which is good) but still requires the presence of the old HDD (I disconnected it, alas...)In the end: I called and told the customer that "I'd be happy to GHOST all her data and slap a fresh Windows 7 install on the new HDD (with a fresh/whole MBR) and then drop all her data back onto it. However, this would require more time; the other option being that she accepts the machine for what it is, perfectly functional minus the dependency on the old HDD."have considered this option, but I found ZERO indication of the old HDD failing, other than "BAD" written on the drive with Sharpie. The customer was happy yesterday and accepted the current state (she didn't want to invest more time/money into it) but today when she picks it up she isn't happy because she was told four months ago that the drive was bad and now I'm saying I don't see an indication of it. Other than pulling the data, installing fresh OS, then dropping data back on; or not installing OS with two drives present in the first place?
View 4 Replies
ADVERTISEMENT
Jul 22, 2010
What is master boot record(mbr)? Could anyone please tell me about it and its function.
View 3 Replies
View Related
Aug 22, 2011
Today I just used a removal tool by Symantec to remove the virus Tidserv Activity on one of my laptops. I restarted the computer and it wouldn't boot. Now I need to restore the MBR since the MBR was infected.It's a Dell laptop. I found that the laptop has System Recovery preinstalled. The instructions Symantec gave me to remove the virus says to use the Windows 7 CD-ROM to restore the MBR, which I don't have.I do however have a Windows 7 re-installation DVD, if reinstallation makes a difference.Can I use the re-installation DVD and is that safer? Or is it okay to just go to System Recovery since it's already pre-installed?My third question is after I decide which way to go about tackling this issue, how do I manually restore the MBR? I've faintly entered "fixmbr" command in the command prompt but it didn't work, basically saying it wasn't a valid command.
View 13 Replies
View Related
May 7, 2011
Have a PC with Windows 7 on it. First hard disk with Master Boot Record failed (had an install of windows xp on it) - have now removed faulty disk, but PC will not boot due to Master Boot Record not being on second disk.How do I go about re-creating the MBR on this Windows 7 install disk ?Tried googling, and as usual nobody seems to have a quick / easy fix - and tried Windows 7 repair options, doesn't work (doesn't even recognise Windows 7 is on the disk).So, I have a non-bootable PC... with access to other PC's and laptops around me (also with windows 7 on), so could plug the disk in to one of those via usb dock station etc...
View 9 Replies
View Related
Mar 20, 2011
Recent update installed was Itunes with a google toolbar.Started getting adware warnings and saw some kind of "adware/malware doctor" asking to update on the pc. When I went to deinstall it as I could see it in the programs list, all hell broke loose and now my machine doesn't boot.
View 4 Replies
View Related
Mar 14, 2010
The Master Boot Record, How do you protect this from being damaged or corrupted and even from a virus attack.Can you back it up in some way , or do you need a backup and recovery program for this.
View 6 Replies
View Related
Aug 28, 2009
How to Restore the Windows 7 MBR (Master Boot Record) ?
View 0 Replies
View Related
Nov 5, 2010
I just want to delete the MBR on both my hard drives. Why? Because I want to. I'm going to delete my MBD and then I'm going to do a quick format of both of my whole hard drives. That's all I want to do.Will not give a clear direct answer to HOW THE @&$* DO I DELETE MY MASTER BOOT RECORD.I DONT HAVE FDISK. I DONT KNOW WHERE TO DOWNLOAD FDISK! I TRIED FDISK COMMANDS ON A COMMAND PROMPT - NOT RECOGNIZED!f anyone here can just tell me in the most simple way how to delete the master boot record on both hard drives...I can't believe there is no utility to do this...should be a utility called "Delete MBR" in my honest opinion.
View 6 Replies
View Related
Aug 5, 2010
I'll get right to it cause this is serious for me and I screwed up royaly. My original OS Windows 7 was on a normal hard drive and I installed a second copy of Windows 7 on a new SSD drive that I got and used it as my primary and left everything on the old one just didn't delete it. When the time came for me to finally say bye bye to all the previous items on the former drive since I was now using the SSD for OS and applications I formated using the Windows 7 startup disc. I cannot boot from the SSD nor does it even show in Device Manager (I'm gonna check the connections for that) This information is still recoverable I know but what's the best way to go about it. Will I be able to use the SSD to boot widows again if I repair this one thing? Can I at least get my files back somehow?
View 1 Replies
View Related
Aug 28, 2012
I have got two separate hard drives one running Windows 7 one running xp. I need to be able to chose which os to run but currently I can only do so by pressing F12. I have tried EasyBCD but it wont work - does anyone know how I can do this?
View 1 Replies
View Related
Jan 19, 2011
Started rebuilding a PC, took out the HDD, formatted in caddy, replaced, took out CPU, cleaned replaced, fitted new cooler. Cleaned and replaced GPU. Switched on, all lights fans startup, screen shows Post splash screen, But that's as far as it goes, none of the key notifications work, loading OS disk does nothing? Changed keyboard for working USB one.
M/B = Gigabyte EP35-DS4
View 9 Replies
View Related
Jan 31, 2012
how to record the boot-up of a PC to video?i need to record some errors im having during start up and id like it to be better than using a Camera Ive got Camtasia but the errors happen befor I can get Camtasia Started?
View 2 Replies
View Related
Jul 27, 2011
I have 2 HDs in my tower, 1 has windows 7, and 1 has server 2008 R2. I installed the server OS to play around with Hyper-V but enver did and I want to remove it to throw a linux distro on it. What's the easiest way to fix the boot record to reflect that server 2008 isn't there anymore?
View 2 Replies
View Related
Nov 30, 2011
have a 1TB drive partitioned into two 500GB partitions. One has everything on it, the other is a backup of the other partition (I know, a horrible idea, but I had no alternative). I now have a 60GB SSD that I want to use only as a boot drive, and store everything else that I possibly can on the 1TB hard drive.Here's my question: What is the best way to go about setting this up? Do I need to set up RAID? Also, will I be able to selectively restore the OS and anything else necessary onto the SSD from my backup partition?
View 6 Replies
View Related
Feb 15, 2010
i have 2 hard drives 1 with win 7 beta but strangley i cant boot the final ver of windows 7 so im installing it onto the 2nd drive, and make it my main boot, now if i want to remove the beta boot record will i lose my files on that hdd.
View 2 Replies
View Related
Dec 6, 2009
Is there an easy way to dual boot on separate drives, i have installed windows 7 on 1 drive & vista on another. This was done independenly on the same machine as to say put vista on last year the got another hard drive took the vista drive out put new hard drive in & installed windows 7.I connected both. they see each other.I have read lots about reinstall one OS but nothing on if its already installed. IS THERE AWAY?
View 1 Replies
View Related
Nov 3, 2009
I've done some searching for this and found some similar issues but nothing fits exactly what I'm trying to do. I have been running Vista Ult. 64 bit for a little over a year and have loved it. It solved all the problems I had with XP Pro 32 bit on my hardware. I bought 7 Pro 64 bit through www.theultimatesteal.com since I'm taking some night classes. I forgot I couldn't upgrade from Ult.
to Pro so I had to do a clean install, which I did, on a separate drive. I have five drives in my system, C, D, and E are all 1TB while F and G are 1.5TB. C is where Vista is installed and G is where 7 is located. I'll be going back and forth between the OS's until I get everything the way I want it.
At that point I want to remove Vista and have 7 be the only OS. But I do not want to migrate the install onto the 1TB C: drive, I want to keep it on the 1.5TB drive but have it recognized as the C: drive. The install was done from within Vista from the download since my physical media has not yet arrived. So even when I boot into 7, it is seen as being installed on the G: drive; it did not make itself the C: drive.
So I'll need to get rid of Vista, get 7 to see itself as being the C: drive, get rid of the boot menu, and swap the drives and cables around to put my 7 install at the head of the HDD pack. I've already done a full system backup of my Vista install with Acronis TIH 2010. How do I need to go about this? On another note; why did MS only offer home and pro through ultimate steal? They offered Vista Ultimate. I mean, it is called ULTIMATE steal, not Pro steal afterall, and it would have made the upgrade process that much easier.
View 1 Replies
View Related
Mar 4, 2012
I currently have Windows 7 installed on two separate drives in my box. I can only set (select) boot sequence in the BIOS. If I recall correctly, way back when a boot selection menu would appear when I think I was running Windows 7 (when it first came out) alongside XP but that screen no longer appears with my current setup. Is there a way to get that screen back, or an alternate way to select the OS of choice without the hassle?
View 9 Replies
View Related
Sep 22, 2012
I have read that using a computer specifically for financial transactions with known and trusted entities (such as a bank) is a good way to reduce (though not eliminate) the risk of your accounts being hacked by reducing the likelihood of inadvertently installing a malware, spyware, or virus by reducing internet sites visited. Assuming this is correct, I was wondering about dual booting one computer with two physical hard drives (each with its own OS) versus one hard drive with two partitions. I figure the former would be "more secure" since one drive would be isolated from any unwanted programs. However, since they shared a few things (motherboard and such), is this set up as "secure" as having two computers? If so, how does one go about setting up a dual boot with two separate hard drives of the same operating system using one computer?
View 5 Replies
View Related
Oct 16, 2009
I have Windows 7 RC1, and am trying to install XP on a separate drive but am getting the following error:
"Setup could not load the keyboard layout file KBDUS.DLL.
Setup cannot continue. Power down or reboot your computer now."
I restart and am able to go back to Windows 7...Any ideas on how to get around this??
View 4 Replies
View Related
Mar 3, 2011
I have separate ide drives one is installed with XP Pro and the other with windows 7. I want to have the choice of either os when the pc boots i.e. choose the drive to boot the pc.
View 2 Replies
View Related
Aug 4, 2012
I want to combine my 2 desktops into one, since I never use both together and the older one is very dated by now (think Time/tiny computers old). My current machine is an Asus P5Q-E with a C2D and has one HDD on a SATA connection running windows 7 64bit. The old computer is a single core Athlon 2700+ thing with a pair of hard drives on a single IDE ribbon.What I want to do is put the hard drives from the old machine into the newer and be able to choose between Windows XP already installed on the old master IDE hard drive and Windows 7 on the newer SATA drive (I've only kept the old computer to run XP for compatibility), all the while keeping the old slave IDE drive as a slave.
View 7 Replies
View Related
Oct 3, 2011
I had a very strange problem today when I was waking my machine up from hibernation. Here's my set up:
Windows 7 x64
Windows 7 is on a SSD drive
Apple Mac Pro
I also have two other drives in, one for OSX and one with an old Vista x64 on it. I mainly work in Win 7, I never shut this computer off, I just restart sometimes. But today I put it in hibernation. When I was supposed to wake it back up the win 7 drive had just disappeared. I booted in Vista 64 and had a look in the disk manager, it tells me that the SSD drive isn't initialized (see attached screenshot).
As you may guess I can't browse this disk, and it does not show up during boot up. I did try to start from the Windows 7 CD and do a recovery, but it can't find my Windows 7 installation and so I guess I can't repair. What I could try to recover? Since I can boot my old OSX and my old Vista I'm quite sure it's not the rest of the hardware, I figure it's the Windows 7 drive or maybe its MBR.
View 7 Replies
View Related
Dec 13, 2010
I have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
View 5 Replies
View Related
Nov 26, 2009
I want to install 7 on a separate hard drive to see how it works & work indepenantly on it's own system. How can I if at all make it so when I am booting up I can toggle in between 7 & xp startups.
View 4 Replies
View Related
Mar 5, 2011
Currently running Win7(64-bit) in RAID-0 on 2 WD Caviar Black's.I just purchased a SSD drive.What I want to do is load Win7 on the SSD and use that as my main drive, while also keeping my RAID drives boot-able and in tact as they are now. (Thus, a dual-boot Win7 setup)Will the BIOS allow me to select which drive to boot from upon start-up? My mobo is an ASUS Rampage II Extreme.
View 6 Replies
View Related
Dec 1, 2009
i have xp home 32 bit as my OS now and i have another hard drive installed and ready to install win 7 64 bit on to. can i do this with xp running or should i disconnect the HD with xp on it, then when i start the computer it won't see any OS and then i could boot from the win7 dvd and do a clean installl and then re=connect the HD with xp on it.
then when i start computer i should get the choice of which one to boot from or is this not the way to do it?? i want the OS's on separate HD's for now as i am sure that not everything that i want to run will work on the 64 bit win7 until i can afford to get all the programs i use to work on win7.
View 2 Replies
View Related
Nov 30, 2012
I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies
View Related
Jan 6, 2010
I currently have windows 7 ultimate in a Dell Gx270 P4 2.6ghz I know its old. And i want to Install Windows XP in another hard drive i have, but how do i make both hard drives boot, so i can select which one i want to boot.
I'm doing this because XP mode doesn't work in this computer. And i don't want to partition.
Most information i find in google requires partitioning and i don't want that.
If you know how please post it, or post the Links where i can find it.
View 1 Replies
View Related
Oct 17, 2012
My computer has windows 7. I created a separate partition on my hard drive to install windows xp, but now when I try to install it I get an chkdsk /f error.
View 5 Replies
View Related
Mar 12, 2012
I would like to remove Vista from my dual boot setup. Here is how I got to where I am now.
I had Vista installed on my PC hard drive (was C. Later, I decided to install Windows 7 HP on a new and seperate HDD. I unplugged the Vista HDD and added the new HDD and installed Windows 7 as if from scratch (I was worried that the install would mess up all my files on Vista). After the Windows 7 was up and running, I then reconnected Vista redesignated it as drive E: and after some searching on how to, I created the dual boot using my Windows 7 disk so I'm assuming the boot file in on drive C: along with Windows 7.
I now want delete the dual boot and Vista so I can use the drive as a backup drive or possibly Win8. I have found several methods to do this but none that really have my specific situation.
View 3 Replies
View Related