I have Windows 7 RC1, and am trying to install XP on a separate drive but am getting the following error:
"Setup could not load the keyboard layout file KBDUS.DLL.
Setup cannot continue. Power down or reboot your computer now."
I restart and am able to go back to Windows 7...Any ideas on how to get around this??
I have got two separate hard drives one running Windows 7 one running xp. I need to be able to chose which os to run but currently I can only do so by pressing F12. I have tried EasyBCD but it wont work - does anyone know how I can do this?
View 1 Replies View RelatedIs there an easy way to dual boot on separate drives, i have installed windows 7 on 1 drive & vista on another. This was done independenly on the same machine as to say put vista on last year the got another hard drive took the vista drive out put new hard drive in & installed windows 7.I connected both. they see each other.I have read lots about reinstall one OS but nothing on if its already installed. IS THERE AWAY?
View 1 Replies View RelatedI've done some searching for this and found some similar issues but nothing fits exactly what I'm trying to do. I have been running Vista Ult. 64 bit for a little over a year and have loved it. It solved all the problems I had with XP Pro 32 bit on my hardware. I bought 7 Pro 64 bit through www.theultimatesteal.com since I'm taking some night classes. I forgot I couldn't upgrade from Ult.
to Pro so I had to do a clean install, which I did, on a separate drive. I have five drives in my system, C, D, and E are all 1TB while F and G are 1.5TB. C is where Vista is installed and G is where 7 is located. I'll be going back and forth between the OS's until I get everything the way I want it.
At that point I want to remove Vista and have 7 be the only OS. But I do not want to migrate the install onto the 1TB C: drive, I want to keep it on the 1.5TB drive but have it recognized as the C: drive. The install was done from within Vista from the download since my physical media has not yet arrived. So even when I boot into 7, it is seen as being installed on the G: drive; it did not make itself the C: drive.
So I'll need to get rid of Vista, get 7 to see itself as being the C: drive, get rid of the boot menu, and swap the drives and cables around to put my 7 install at the head of the HDD pack. I've already done a full system backup of my Vista install with Acronis TIH 2010. How do I need to go about this? On another note; why did MS only offer home and pro through ultimate steal? They offered Vista Ultimate. I mean, it is called ULTIMATE steal, not Pro steal afterall, and it would have made the upgrade process that much easier.
I currently have Windows 7 installed on two separate drives in my box. I can only set (select) boot sequence in the BIOS. If I recall correctly, way back when a boot selection menu would appear when I think I was running Windows 7 (when it first came out) alongside XP but that screen no longer appears with my current setup. Is there a way to get that screen back, or an alternate way to select the OS of choice without the hassle?
View 9 Replies View RelatedI have read that using a computer specifically for financial transactions with known and trusted entities (such as a bank) is a good way to reduce (though not eliminate) the risk of your accounts being hacked by reducing the likelihood of inadvertently installing a malware, spyware, or virus by reducing internet sites visited. Assuming this is correct, I was wondering about dual booting one computer with two physical hard drives (each with its own OS) versus one hard drive with two partitions. I figure the former would be "more secure" since one drive would be isolated from any unwanted programs. However, since they shared a few things (motherboard and such), is this set up as "secure" as having two computers? If so, how does one go about setting up a dual boot with two separate hard drives of the same operating system using one computer?
View 5 Replies View RelatedI have separate ide drives one is installed with XP Pro and the other with windows 7. I want to have the choice of either os when the pc boots i.e. choose the drive to boot the pc.
View 2 Replies View RelatedI want to combine my 2 desktops into one, since I never use both together and the older one is very dated by now (think Time/tiny computers old). My current machine is an Asus P5Q-E with a C2D and has one HDD on a SATA connection running windows 7 64bit. The old computer is a single core Athlon 2700+ thing with a pair of hard drives on a single IDE ribbon.What I want to do is put the hard drives from the old machine into the newer and be able to choose between Windows XP already installed on the old master IDE hard drive and Windows 7 on the newer SATA drive (I've only kept the old computer to run XP for compatibility), all the while keeping the old slave IDE drive as a slave.
View 7 Replies View RelatedI have Window XP installed on Drive C:. My son installed Windows 7 on Drive E:. However, when the computer is booted up, it boots up in Windows 7, without allowing a choice. I suspect this can be corrected in BIOS, but don't want to screw it up.
View 5 Replies View RelatedI want to install 7 on a separate hard drive to see how it works & work indepenantly on it's own system. How can I if at all make it so when I am booting up I can toggle in between 7 & xp startups.
View 4 Replies View Relatedi have xp home 32 bit as my OS now and i have another hard drive installed and ready to install win 7 64 bit on to. can i do this with xp running or should i disconnect the HD with xp on it, then when i start the computer it won't see any OS and then i could boot from the win7 dvd and do a clean installl and then re=connect the HD with xp on it.
then when i start computer i should get the choice of which one to boot from or is this not the way to do it?? i want the OS's on separate HD's for now as i am sure that not everything that i want to run will work on the 64 bit win7 until i can afford to get all the programs i use to work on win7.
I currently have windows 7 ultimate in a Dell Gx270 P4 2.6ghz I know its old. And i want to Install Windows XP in another hard drive i have, but how do i make both hard drives boot, so i can select which one i want to boot.
I'm doing this because XP mode doesn't work in this computer. And i don't want to partition.
Most information i find in google requires partitioning and i don't want that.
If you know how please post it, or post the Links where i can find it.
My computer has windows 7. I created a separate partition on my hard drive to install windows xp, but now when I try to install it I get an chkdsk /f error.
View 5 Replies View RelatedI would like to remove Vista from my dual boot setup. Here is how I got to where I am now.
I had Vista installed on my PC hard drive (was C. Later, I decided to install Windows 7 HP on a new and seperate HDD. I unplugged the Vista HDD and added the new HDD and installed Windows 7 as if from scratch (I was worried that the install would mess up all my files on Vista). After the Windows 7 was up and running, I then reconnected Vista redesignated it as drive E: and after some searching on how to, I created the dual boot using my Windows 7 disk so I'm assuming the boot file in on drive C: along with Windows 7.
I now want delete the dual boot and Vista so I can use the drive as a backup drive or possibly Win8. I have found several methods to do this but none that really have my specific situation.
install on my PC desktop a Dual Boot two separate HDD's Windows 7 32Bit on IDE drive & Snow Leopard OSX on SATA drive
My Pc ASUS P5PL2-E
Core 2 Duo E4600 2.4GHz
2MB DDR2 NVIDIA GeForce 8400 GS
I already have windows 7 Ulitmate x86 but 1 day I came up with an idea of giving a try on x64 one by dual booting.. So I downloaded it legally from microsoft and I did every procedures required for the install. Shrunk my C drive and installed the OS on the unallocated free space on the drive and it went on perfectly. But the problem is the System Reserved partition showed up on the x86 OS. every time i open My Computer i can see the system reserved partition.
I could accidentally do something wrong with the partition if it remains unhidden so I want to hide it. I was thinking of changing the drive letter but I afraid that's going to give me boot problem. In disk management the System Reserved is labelled Z and marked as active. I tried to set my other partition as active that day but the pc cannot boot at all not even the boot manager showed up. However I managed to fix it using my recovery disc to access the cmd and reactivate the Z drive using diskpart.
have a 1TB drive partitioned into two 500GB partitions. One has everything on it, the other is a backup of the other partition (I know, a horrible idea, but I had no alternative). I now have a 60GB SSD that I want to use only as a boot drive, and store everything else that I possibly can on the 1TB hard drive.Here's my question: What is the best way to go about setting this up? Do I need to set up RAID? Also, will I be able to selectively restore the OS and anything else necessary onto the SSD from my backup partition?
View 6 Replies View RelatedI just bought an SSD and want to install windows 7 on it and have all my other files on a separate non ssd drive. How would you get the OS to change the default directory from C: to another directory and make it that way when installing programs etc.
View 4 Replies View Related1. I have Windows 7 (64 bit) ALREADY installed on a SINGLE hard drive.
2. I have a clean blank other SINGLE hard drive upon which I will install Windows 7 (32-bit).
3. this is TWO individual hard drives, I want an Operating System installed on each individually. (Windows 7 on ONE, Windows 7 on the other)
4. I'd like a boot menu to come up giving me a choice to boot to either the Windows 7 drive OR the Win 7 (32bit) Prof. drive.
I admit to being clueless when it comes to dual booting. I already have 7 X64 on my C: drive and a completely blank internal, formatted D: drive. How do I go about installing Windows 8 on drive D: and setting it up to dual boot?
View 9 Replies View RelatedI'm in IT (surprise surprise) and I have extra hard drives coming out my ears. I want to move my Win RC x64 install to a larger hard drive.
Whats the easiest way to do this? I know its possible, I used to ghost XP machines at the local highschool (dont fret, they were all licensed).
I'm toying with the concept of making a fresh install, and doing something to the effect of a system restore to it, or something like that.
On a slightly less related note, my system is more powerful a machine than i ever expected to own two years ago. Its a core i7 machine with 12gb of ram and Windows 7 installed on a raptor. Why doesn't a fresh install of Windows 7 simply fly? Sure, multitasking can be done almost infinitely (lol), but there's literally no speed increase in app startup times, opening "my computer" or the device manager. None of it works as quickly or smoothly as i would have thought.
Also, again, where can i find a simple list of changes between RC and RTM?
As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedI have a Gigabyte 880GM-D2H motherboard. I am trying to install Windows 7 on a separate SSD drive(OCZ-Vertex3) but Windows does not see this drive, but it is listed in my BIOS..
View 1 Replies View RelatedI have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
I have Windows 7 installed in C , Now I want to install XP in other partition (D) in the same HD, to work on dual boot.
I ask help from you because I could not do the installation by the obvious method: installing XP by booting its installation CD and choosing the D partition for the system, my Windows 7 stopped to work, I had to repair it with Windows 7 installation CD.
So, i've been using Windows 7 for a few months, and i decided to install XP on another HDD, which is completely empty. It all went well, except fot the dualboot thing, cause i can only boot XP. I've tried changing the boot sequence, and still only XP boots.
What can i do to make Windows 7 boot again?
I've got a bit of a perplexing problem here that I hope somebody can provide some insight on. Set up the dual boot with your (very awesome) tutorial and everything works perfectly there. Windows 7 was installed first to the C: drive, XP is on an E: partition of the same drive. The D: drive is a second physical drive that is just used for file storage. If it matters, both physical drives are paired drives in Raid1.
The problem comes when I've loaded into Windows XP, I can't access the D: storage drive. It reads as size 0, and can't be formatted or read.
Under Windows 7, everything works. I can access the storage drive fine and have no problems using it.
I originally thought it was a permissions thing because the D: drive was formatted in Windows 7, but in XP I can read from the Windows 7 C: drive just fine.
I am at a loss, can anybody offer any suggestions as to why the drive would read fine under 7 but not when in XP?
I installed windows 7 on my desktop where XP was already installed. Now, unless I have the RC1 DVD in the drive, the computer automatically boots to XP with no option. If I leave the DVD in the drive it gives me the ''press any key to boot from CD or DVD" then automatically goes to Windows 7 if I dont press anything. I used BCD while in 7 and it didn't seem to have an effect.
View 4 Replies View Related1. My machine has XP on a single hard drive w/ 3 partitions. In order to try Windows 7 the easiest thing for me to do is to install it on my E: partition. If I boot into Windows 7, do the drive letters change around or do the Windows 7 system files still show up as E:WINDOWS?
Are there any downsides to this installation that I don't know about? If I got tired of Windows 7 would it be a problem to get rid of the bootloader?
2. My original plan was to buy a second hard drive, install it by itself, and load Windows 7 onto it. Then reconnect the original hard drive and dual boot by changing the boot order in the BIOS. What does this do to the drive letters?
I would have one hard drive with 3 partitions and another hard drive with one partition. If I boot Windows 7 I'm guessing that its hard drive would become C: and the other hard drive would become D:, E: and F:. But what happens if I boot XP from the other hard drive? Does it stay C:, D: and E: and the second hard drive becomes F:, or do the letter scramble differently?