I have Windows 7 installed in C , Now I want to install XP in other partition (D) in the same HD, to work on dual boot.
I ask help from you because I could not do the installation by the obvious method: installing XP by booting its installation CD and choosing the D partition for the system, my Windows 7 stopped to work, I had to repair it with Windows 7 installation CD.
So, i've been using Windows 7 for a few months, and i decided to install XP on another HDD, which is completely empty. It all went well, except fot the dualboot thing, cause i can only boot XP. I've tried changing the boot sequence, and still only XP boots.
What can i do to make Windows 7 boot again?
With this setup, W7 booted every time, with no dual boot menu appearing. If I pressed F12 during startup, I got to a boot menu where I could choose to boot either W7 or XP, with W7 being highlighted. However, this is how I want it to look like:At startup, the boot menu appears every time, with XP highlighted, and W7 as an alternative.
View 3 Replies View RelatedAfter installing Win 7 ULT 32 and 64 several times
- I am able to install either 32 or 64 version as a first OS, but when trying to install it as a second OS on the SEPARATE PARTITION OF THE SAME SATA3 HD, it fails once the install starts at app 30 min to complete the install. Tried it several times and it always fails.
- XP Pro fails to install as either first or second OS (can not install it at all). It gives me blue screen.
When working with one OS only (either Win 7 32 or 64 ULT) all drivers install with no issues and system is stable so I assume my issues are not hardware related.
Here is hardware config:
- AMD 6 core 1920T
- SATA3 WD 1TB hard drive - Western Digitac Caviar Black WD1002FAEX 1TB 7200
- Sapphire HD 5770 Varor X video card
- 2x4GB of Kingston RAM
-Asus M4A89GTD Pro USB3 motherboard
-CoolMaster UAF920 case with 750W power supply (750GTX)
I have lost the ability to dual boot after installing windows XP.
I Originally had windows XP. I partitioned the drive in order to install windows 7. Installed windows 7 fine, no problems, was able to dual boot. After getting data from XP partition. I decided to do a clean install of xp. After doing that my machine only boots into XP, I no longer have the dual boot option.
I have tried booting off the windows 7 dvd and 'repair computer'. It said it found some problems and fixed them. Rebooted, still only booted into XP. Tried booting off DVD again ran 'Startup Repair option' Again, said it fixed some things, still only boots into XP.
I also tried EasyBCD and it said it fixed the problems, but everything is still the same. I can only boot into windows xp. No dual boot.
My boot.ini, ntldr and ntdetect are all on partition that has windows 7 installed.
Saw the posts about Vistabootpro but wanted to make sure i went that route before i purchased it and wanted to make sure of the correct steps to follow.
I'm really having fits trying to dual boot a friends computer with xp home SP3 after windows 7 pro 64 bit. I slipstreamed all the drivers for his board (asus P8Z77 V LK) into the disc and xp disc gets to the point of choosing the partition to install on. The partition created using windows 7 does not show up. Just shows C disk (corsair nuetron ssd) as one partition having the entire space. None of the commands to create or delete the partition work. Booting back into 7 and going to disk manager shows the disk to be correct : 100 MB system reserved, then the partition for windows 7 as "C", then the 20GB partition XP as "D". I have read that windows XP needs the partition to be "active" in order to install but don't know if this is true. At this time the "D" partition is not active, the "C" partition is. Tried to do this with all other drives (two 1TB western digital HDD) disconnected but that didn't work either.
View 9 Replies View RelatedI'm wanting to install Windows 7 as a dual boot alongside my existing XP set up and have been trying to follow the excellent guide at Dual Boot Installation with Windows 7 and XP
But I'm stuck at resizing the existing partition as described at Partition or Volume - Shrink
I get as far as the command prompt and selecting the drive, but as soon as I type "shrink querymax" or "shrink desired=15360" or even just "shrink" I get the message
"Diskpart has encountered an error: This service cannot be started in safe mode"
Now I can't see any way of getting a command prompt WITHOUT starting in safe mode.
Well i am currently running Vista Home Premium sp2 and Windows 7 Ultimate (build 7100) in a dual boot config for about 2-3months and loving it. I was wondering if i could upgrade my Windows 7 install to RTM without affecting my Vista install? Do you get a choice which OS you want to upgrade or does it go by what OS you load the upgrade disc from?
View 5 Replies View RelatedI have on my desktop a dual boot Vista64 and Vista32.
BCD is via Vistabootpro.
I would like to overwrite the Vista32 install with Windows7.
Anything I should be aware of?
I hestitate for example to set the Bios to boot from DVD while installing Windows 7 or will the Windows 7 install when rebooting during installation automatically default to the Vista32 partition?
I have Windows 7 RC1, and am trying to install XP on a separate drive but am getting the following error:
"Setup could not load the keyboard layout file KBDUS.DLL.
Setup cannot continue. Power down or reboot your computer now."
I restart and am able to go back to Windows 7...Any ideas on how to get around this??
Can I install a dual boot with an existing XP OS with a 64 bit w7?
View 2 Replies View Relatedi tried to instal in vmware in that linux installation taking more time around 4 hours?
View 1 Replies View RelatedI've been trying to install Windows 7 Pro upgrade as dual boot with XP Home, and keep getting the message (something like) "Disk read error - press ctr-alt-del to restart" at the first boot during the installation processHave checked the hard drive for errors, and there are none. Have replaced the hard drive with a brand new one, and get the same result.[I also tried installing Windows 7 Home Premium upgrade, and get the same result.] [code]
View 4 Replies View RelatedI currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?
View 1 Replies View RelatedI just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
I have a Windows 7 installation (x64). I wanted to install windows xp 32 in a dual boot scenario for some backwards compatibility hardware issues (video stuff).Anyway, I read the various tutorials and I have used nlite to put sata drivers into my win xp install iso/cd.My problem is that windows xp won't I get the hard drive error message DURING the install (ie, the first time xp asks you to reboot, but long before it tries its various installation things) have tried the various things associated with this, Easybsd, a Windows 7 restore and using fixmbr/etc. I can get BACK into windows 7, but setting up the menu is pointless because xp never installs correctly to begin with. It seems that the guides on fixing this error message are assuming you get it after xp completes its install and tries to boot -- instead, I am getting the error DURING the install. I get a /windows directory on my partition, but it clearly isn't a complete install because I never see the windows install screens with the pictures, estimated time, etc.
View 6 Replies View RelatedI have just discovered that I cannot do an Upgrade from Vista HP to Win 7 Pro and that I will have to do a Custom or clean install. That will be OK and doesn't cause any problems.
I have XP on one HDD and Vista on another with dual boot. However I want to replace Vista HP with Win 7 Pro 32 bit, ( I intend to go 64 bit later on).
What I would like to know is, will Win 7 replace Vista on the boot sequence (MBR?), so that on booting the PC I have the option of selecting either XP or Win 7, or will I be presented with a boot menu of XP, Vista and Windows 7, albeit that Vista is no longer installed? If the latter, will this cause any problems in selecting the OS that I want to launch i.e the MBR looking for a now non existing Vista and would there be a way to remove reference to Vista?
I have a hp dv 6000 i was trying to dual boot my pc with win 7 and xp pro, with win 7 installed first. in order to install xp i had to disable my sata native. I can dual boot but on my xp its seem I'm missing alot of drives. I have no internet or sound,
any suggestions?
I already have windows 7 Ulitmate x86 but 1 day I came up with an idea of giving a try on x64 one by dual booting.. So I downloaded it legally from microsoft and I did every procedures required for the install. Shrunk my C drive and installed the OS on the unallocated free space on the drive and it went on perfectly. But the problem is the System Reserved partition showed up on the x86 OS. every time i open My Computer i can see the system reserved partition.
I could accidentally do something wrong with the partition if it remains unhidden so I want to hide it. I was thinking of changing the drive letter but I afraid that's going to give me boot problem. In disk management the System Reserved is labelled Z and marked as active. I tried to set my other partition as active that day but the pc cannot boot at all not even the boot manager showed up. However I managed to fix it using my recovery disc to access the cmd and reactivate the Z drive using diskpart.
I've installed 64bit win 7 on a 2nd partion of my main drive running vista 64bit. The installation all went smoothly and loaded into win 7.
But when restarted I did't get a windows boot manager screen so i could pick if I wish to load Vista or Windows 7, instead my system just loads straight into Vista.
Do I have to enable my system to be able to see the Windows 7 install?
I'm going to make a clean install of windows 7 and therefor have some question
1)As I want to make a dual boot install with a Linux distribution I thinking about the Partitioning. I want to make following Partitions: [code] Windows 7 also always creates this small 100MB system restore partition. So what would be the best way to prepare these Partions. I would use GParted Live CD to create the Partition in advance, that everything is the way I like it. But I'm not sure if this works without problems for the 100 MB system restore partition (lasts time I got 2 100 MB partitions)
2) I want to move the Users data to a separate partition and found this guides: User Profiles - Create and Move During Windows 7 Installation [2]=User%20Accounts User Folders - Change Default Location(Don't know which one I chose to do so till now) But I see in Windows 7 there are much more useless directories in the users home directory:I've already learned the new Library system, but I still want to use the Users directory. But there is a great mess. Is there a useful/possible way to prevent the directory to mess up with all the sub directories, often created by some apps, don't really using the directory. Or are you just ignore the users home directory? Usually I got about 5 to 8 sub-directories in each Directory for a tidy system to find everything and have a good ordered system.
i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View Relateddual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedAs currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I have a install of Windows 7 on my computer which I am not willing to remove and reinstall. I would like to try out the Windows 8 developer trials, it seems logical given my situation to dual boot, allowing me to keep my current install and test Windows 8 simultaneously. I have a spare 80gb hard drive I could use, or I could create a partition on one of my existing hard drives, but a partition is much less ideal. I have tried dual booting linux on the hard drive before, but the linux drive over rode my dual boot set up (I obviously did something wrong), and I could only boot to linux.
How can I safely dual boot Windows 8 on this hard drive (or a partition if necessary), while keeping my Windows 7 install and data in-tact? Just to let you know I have over a TB of data spread over 2 drives but only 2 TB of hard drive space, so I can't back up a lot of my data, just a heads up.
I have a PC with XP Home and wish to upgrade it to Win 7-64. I purchased the Win 7 upgrade version. Will ditch XP when happy with getting programs installed in Win 7.I also have a new drive that I wish to do the install of Win 7.My plan is to hookup new drive, place Win 7 DVD in drive and run the install in Custom mode. This should install Win 7 on new drive and preserve Win XP on the old drive.To register Win 7, I have the serial info from the Win XP system and will insert when asked. I'm concerned about whether this method to register will work correctly as I was told that Win 7 must find a windows.old file on the installation drive. Will it work OK?
View 7 Replies View RelatedI have Win XP 32 bit on my old drive. I buy Win 7 full retail and a new HD. I set bios to boot from cd etc. Win 7 starts up. It shows the 2 drives, so I select new drive...no problems. It starts install. I leave it to do its stuff.When I come back its up and all ok.I dint get any option to boot from XP. The drive was listed as "SYSTEM" but not old Windows or anything.
Also ASUS chipset drivers dont work and they were listed as 7 drivers.I tried Vista drivers but it normally shuts down and restarts. Nothing.
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View Related