I have on my desktop a dual boot Vista64 and Vista32.
BCD is via Vistabootpro.
I would like to overwrite the Vista32 install with Windows7.
Anything I should be aware of?
I hestitate for example to set the Bios to boot from DVD while installing Windows 7 or will the Windows 7 install when rebooting during installation automatically default to the Vista32 partition?
Well i am currently running Vista Home Premium sp2 and Windows 7 Ultimate (build 7100) in a dual boot config for about 2-3months and loving it. I was wondering if i could upgrade my Windows 7 install to RTM without affecting my Vista install? Do you get a choice which OS you want to upgrade or does it go by what OS you load the upgrade disc from?
View 5 Replies View RelatedI just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
I have just discovered that I cannot do an Upgrade from Vista HP to Win 7 Pro and that I will have to do a Custom or clean install. That will be OK and doesn't cause any problems.
I have XP on one HDD and Vista on another with dual boot. However I want to replace Vista HP with Win 7 Pro 32 bit, ( I intend to go 64 bit later on).
What I would like to know is, will Win 7 replace Vista on the boot sequence (MBR?), so that on booting the PC I have the option of selecting either XP or Win 7, or will I be presented with a boot menu of XP, Vista and Windows 7, albeit that Vista is no longer installed? If the latter, will this cause any problems in selecting the OS that I want to launch i.e the MBR looking for a now non existing Vista and would there be a way to remove reference to Vista?
My system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedI have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedI had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedI have dualboot XP SP3 and Vista Ultimate on my system,,and now i want to install Windows 7 over the XP OS. I wish to keep Vista with Windows 7 without reinstalling Vista.
Can I just install Windows 7 over XP , or should i be careful for MBR,or boot....
I just want to make sure that installing 7 as an upgrade 'over' Vista removes all of Vista's operating system, particularly the registry. Is this a correct assumption? I've got some registry entries for magicjack that I can't remove with Regedit due to permission problems and since my "7 upgrade" is due in a few days I don't want to mess with trying to remove them again.
View 9 Replies View RelatedI ordered a Vista Ultimate Upgrade disc to get rid of the Windows 7 RC 32-bit. Since 7 is newer, they say it won't work, but I've heard from two sources that booting from BIOS would overwrite 7. Is this true? I don't care if it cleans my HD, I already backed up.
View 2 Replies View RelatedI installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedHi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
View 9 Replies View RelatedI seem to be having a right trauma with this lol. I originally had Vista installed. Then i installed 7 to another HDD and that worked fine. I could choose between the OS. Now, i want to get rid of vista and use 7 solely. Easy i thought. Remove the boot entry and format the partition. Thats where it went horrilby wrong
Upon reboot i got the dreaded BOOTMGR missing file do'h
Anyway long story short i manged to system restore and fixmbr to boot back into 7 (phew)
Now can anyone tell me of a way that i can ditch vista without the headache of this.
ive attached a screen shot of how things are layed out.
Plus can anyone recommend a good imaging program that i could use just in-case my tinkering leads to something i cant repair.
I've something going on in my PC with 3 partitions. I have one called C:/ where I have Windows Vista 32-bit (x86) installed, other called S:/ which is empty and the last one is N:/ where I have all my files like images, music, videos, etc... (wisely done so when I need to re-install OS, don't waste time burning all that files on dvd).
Since I got one partition empty (S:/), I decided to give Windows 7 a try. Being a TechNet Plus subscriber, allowed me to get a free copy of Windows 7, which I downloaded and it was saved on C:/ partition.
I know that's stupid and I've been slapping myself because of that but, I went to the downloaded files and hit twice on setup.exe. This means I didn't burned the .iso to a DVD
Seven was sucessfully installed. After playing around with new features and graphics, I installed some Windows Updates and rebooted for the first time (since I installed it).
DAMN, here starts the problem because when booting up, appeared the message on black screen saying "BOOTMGR IS COMPRESSED. HIT CTRL+ALT+DEL TO REBOOT". I totally forgot that my S:/ partition was compressed! And we all know that an OS partition should never be compressed. And then I slapped myself again.
The weird thing is that I couldn't boot in Windows Vista, I hadn't that option. Since I didn't burned Windows 7 to a DVD (*slapping me again*) and I couldn't start in Vista, I had to insert a modified Vista DVD by Toshiba (that came with PC when I bought it), this means that I don't have the repair option, I'm only able to format and re-install OS (and that sucks!), ..., and now it is fixed, that "bootmgr is compressed" message is gone which allowed me to boot to WinVista but where's dual boot??!
First thing I done when I got Vista back was uncompressing S:/ partition. Then I went to msconfig, but there is only one OS in Boot tab - Windows Vista. Once C:/ partition was formatted, and Windows 7 Setup was saved there, I lost those files, I need to download them again. But it is already installed, so there has to be a way to fix this. The problem is that I can't load Windows 7, I don't have that option while booting...
Anyone knows how to fix this?
I installed Seven Beta on a dedicated partition in my laptop so that now my hard disk has the following partitions:
C=VistaOS default OEM Operating System
D=Data for documents, pictures, etc.
E=SevenOS Seven Beta
This is when I read my HD from Vista, but from inside Seven the partitions are like that:
C=SevenOS, D=Data, E=VistaOS
My problem is that I CANNOT boot Seven as there is no dual boot menu showing at all during boot time.
I downloaded BCDEdit and added a menu entry for Seven, but that did not work. Again, no dual boot menu showing at all.
So here's my question: how can I set up a dual boot process using the standard tool of Vista, for BCDEdit didn't work and at this very moment I cannot boot Seven?
the vista and win7 both has retail version,n it is 30days trial...for which lots of cracks n activators are available.i just want to know,i am trying dual boot,having win7 on C n vista on D partition,n both are activated by crack...but problem is,as long win7 is only OS,its activated but as long i install vista on D n apply crack,vista gets cracked but win7 on C again reverts to 30day trial.as i felt,this might be cause of installing win7 on C n vista on D,i mean oldest OS must be 1st,i dun know i m saying right or wrong.
View 1 Replies View RelatedI was wondering if it's possible to run windows 7 along with Vista (64bit). My current computer has 4 drives setup in a RAID configuration and i am wanting to add a new drive which I could run Windows 7 on.
View 1 Replies View RelatedOkay so I set up a new partition on my hard drive to boot Windows 7 from, so that I could have both Vista and Windows 7 on my laptop. However, is there a way that Windows 7 can use all of the programs and files I already have in my Vista partition? I can manually go over and start them, but they aren't on my "Programs" list in Windows 7 or the start menu or anything.
is there any way to automatically integrate all my files/programs with both my operating systems? I don't think I should have to download two instances of google chrome or firefox. you know? Any insight would be appreciated. I am new to dual booting. This is is the first OS i have ever installed myself.
I've been going at this all day searching, trial and error, and it's all very frustrating at this point.
I use a custom bootloader for my vista 64 to trick it to be activated (not sure your policy on discussing this). But now I wanted to try Windows 7 since it has been released in the RC status (because I had aquaintances try 7000 beta, and no one liked it). So I want to have it on my machine to tinker with and test it out.
I ended up taking my 300GB drive, and removing about 60GB from it, creating a logical partition, formatting it, then booted into the Windows 7 dvd I have. (win 7 - 7600)
Firstly, it takes about a couple minutes just to load the files. Then once it finally gets to the splash* screen and the cursor appears.....it takes about 5-10minutes for the "install" window to appear which seems VERY odd since my machine is VERY fast.
It takes quite a bit of time to accomplish installing from loading to finished (30minutes maybe), and by then it overwrites my bootloader for my VISTA installation (so its not activated anymore), and it shows WIN 7, and below that Vista 64. Read more at the forum...
I got an issue were i have to install windows 7.Currently i have an Dell inspiron 1721 laptop with windows vista.Problem is there is a lot of data on my machine and i dont want to format and fresh install i would like to dual boot is there a way to do this?How would you guys suggest i do this without messing up my windows vista.What programs do i need what steps do i need to take.
View 1 Replies View RelatedI recently did an install of Windows 7 (a clean install) and accidenlty selected to dual boot somehow (I chose to install 7 on the D drive instead of C, where Vista is installed)
I do not want Vista anymore. How can fix this?
i want to uninstall windows Vista but keep Win 7. Ok so Windows Vista is installed on the C:// while Win 7 is installed on the H:// drive. My Edition of windows 7 is Ultimate, I could reinstall but I have installed lots of stuff on it. I have Easy BCD. Picture of Disk Management is attached
Edit: I dont have a cd drive (i installed using Virtual Clone Drive)
I have just joined this forum today because I have a couple of questions about installing Windows 7. My Gateway desktop has a 250gb harddrive which has Windows Vista SP1 installed on a 70gb C;/(active/boot) partition and a 10gbD/recovery partition and the rest of the drive is Unallocated- and this is where I intend to install Windows 7. However I don't want it to use all of the unallocated space, so during setup will I be able to limit how much space Windows 7 can use?
View 9 Replies View RelatedI started out with Vista 32 Ultimate installed on my machine. I created a second partition on that system drive , and left my data drive alone and installed Win 7 64 Ultimate RC on the new partition. The system boots to win7 with no boot menu to pick vista from, any ideas?
View 2 Replies View RelatedI am having an issue with dual booting Windows 7 64 and Vista 32. Here's the story, I had Windows 7 64 bit installed and needed to install Vista 32 to use some programs/hardware. I created a 20GB partition on my HHD using Acronis Disk Director. Then I installed Vista 32 Business onto the 20GB partition. Upon completing the install of Vista I rebooted the machine back into Windows 7. The weird thing is whenever I boot into Vista then reboot and try to boot into Windows 7 it says starting windows and the little animation happens then instead of loading the Windows 7 OS it just shows a blank screen.
I saved a system restore point in Windows 7 and I can boot into windows 7 via safe mode to restore it. When I restore it it boots into windows 7 fine but the same thing happens if I try to boot into Vista then reboot and try Windows 7. I ran startup repair off the windows 7 disc today but that didn't help. I'm so confused!?
after installing windows 7 in the same partition in which the vista resides,when i restart i have this windows dual boot screen,but i no longer want my vista,how do i go about it?
and why is my Sleep option in the windows start menu greyed out? there is only Restart,Shut Down,Hibernate,Lock,Swith User options.everything except the Sleep. why
I have attached the screen shot from Disk Manager which shows how I installed Windows 7 on a machine that originally ran Vista.After I used Windows 7 I have not used Vista for over a year so I moved the Windows 7 to the start of the HDD using Partition wizard and some instructions on the web.I now want to delete all the vista files and stop the dual boot getting the PC to go straight in to Windows 7.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 3327 Mb
Graphics Card: ATI Radeon HD 4800 Series, 512 Mb
Hard Drives: C: Total - 509906 MB, Free - 305018 MB; D: Total - 205479 MB, Free - 183636 MB; E: Total - 715401 MB, Free - 300404 MB;
Motherboard: ASUSTeK Computer INC., P5Q-PRO
Antivirus: Norton Internet Security, Updated and Enabled
I recently installed Win 7 on a second Hard drive. Is it possible to run the programs I had installed on the Vista Hard drive? Both are HD's are still installed.
View 2 Replies View RelatedI've done some searching for this and found some similar issues but nothing fits exactly what I'm trying to do. I have been running Vista Ult. 64 bit for a little over a year and have loved it. It solved all the problems I had with XP Pro 32 bit on my hardware. I bought 7 Pro 64 bit through www.theultimatesteal.com since I'm taking some night classes. I forgot I couldn't upgrade from Ult.
to Pro so I had to do a clean install, which I did, on a separate drive. I have five drives in my system, C, D, and E are all 1TB while F and G are 1.5TB. C is where Vista is installed and G is where 7 is located. I'll be going back and forth between the OS's until I get everything the way I want it.
At that point I want to remove Vista and have 7 be the only OS. But I do not want to migrate the install onto the 1TB C: drive, I want to keep it on the 1.5TB drive but have it recognized as the C: drive. The install was done from within Vista from the download since my physical media has not yet arrived. So even when I boot into 7, it is seen as being installed on the G: drive; it did not make itself the C: drive.
So I'll need to get rid of Vista, get 7 to see itself as being the C: drive, get rid of the boot menu, and swap the drives and cables around to put my 7 install at the head of the HDD pack. I've already done a full system backup of my Vista install with Acronis TIH 2010. How do I need to go about this? On another note; why did MS only offer home and pro through ultimate steal? They offered Vista Ultimate. I mean, it is called ULTIMATE steal, not Pro steal afterall, and it would have made the upgrade process that much easier.
I have been running Windows Vista 64 for about 3 years off of 2 HDD's in RAID0 and I just got a 60GB SSD which I wanted to install Windows 7 on it and still be able to dual boot my Vista 64 from my RAIDED drives. And then shrink the partition on my RAIDED drives to roughly 50% and create a new partition on them for my Windows 7 install to also be able to use to install programs and files. Which I was told elsewhere is totally possible. Windows 7 Install
When installing Windows 7 on my SSD I couldn't get it to install with the SATA MODE in the BIOS set to RAID, it would say "cannot install to this disc, check if its enabled in BIOS". So I had to set it to AHCI MODE, which worked, so I unplugged every drive in my system and installed Windows 7 on the SSD like this.
So the problem is when I plug my RAIDED drives back in they will only boot when the MODE in the BIOS is set to RAID but then the Windows 7 on the SSD doesn't boot as that only boots when the MODE is set to AHCI. In my BIOS the SSD is only visible in AHCI MODE, my RAID drives are visible in both MODES but as Intel_Array in RAID MODE and as 2 seperate drives in AHCI mode.
So I am in a bit of a pickle and not sure what to do... I don't mind have to change the SATA MODE settings in the BIOS to dual boot back and forth, but will I be able to shrink and re-partition the RAID drive so Windows 7 can use them? With the MODE set to AHCI I can boot to Windows 7 from the SSD, and after installing the Intel Rapid Maxtrix Storage Controller I can access most files on the RAID array so it does detect the RAID array even when its set to AHCI but will not boot the RAID array in this MODE.
I fear the problem may be with my BIOS, Motherboard or the Storage Drivers as the RAID mode should be able to support a RAID array aswell as a stand alone drives using AHCI. But for me it seems when I enable RAID MODE, AHCI fails to work on the SSD. This could be because I installed it on the AHCI MODE but thats all I could do.
My system:
Abit IP-35 motherboard
Intel Core 2 Duo E2160
4GB DDR2
2x 250GB Western Digital in RAID0 booting with VISTA 64 (for about 3 years).
1x 60GB NEW Corsair SSD with Windows 7 (64) on it.
1x 640GB Western Digital Storage drive (currently unplugged).