I'm working in China for the time being and I was having good luck with a VPN called freegate. Now that I've installed a wireless router my IP has changed and I am no longer able to use my VPN. I am also running Avira free antivirus if that makes a difference. I'm new to using VPN's and I really need help in understanding how a VPN works so I can access Facebook and other sites banned here by the government.
View 1 Replies
I'm currently using outlook express on XP. It starts up and checks email in less than a second. It uses hardly any system resources. I like this.I'm getting a new laptop with W7---can't use OE any longer (not compatible). So which client should I use? I don't care about extra functionality, fancy graphics or other bloat. Just speed in starting up and checking email (I heard windows live/thunderbird mail are slow and a significant drain on resources)I really don't like the idea that I'm upgrading to a MUCH faster PC only to end up with a slower email experience.
View 2 Replies View RelatedI am running Win 7 Pro SP1, but this problem started before I upgraded to SP1. In my start menu, 64 bit IE8 opens and works just fine, but the 32 bit version does NOT run. Also, the Windows update choice on my menu does not run (Does that require the 32 bit version?). When I try to connect to the update via its website, it always refers me back to the start menu, so no help. Is there some registry key that got turned off?
View 2 Replies View RelatedToday I did a fresh install of Windows 7 Build 7232 because it was newer and also because Build 7077 would no longer boot. I have reinstalled 7077 and reinstalled 7232 twice. Windows works okay for a while and then will freeze and I will have to power off the PC and restart. But when I try to turn it back on it hangs at the Starting Windows screen. My other desktops have no troubles with Windows 7 at any build. I can start in Safe Mode but nothing else. Thanks in advance.
PS I had just finished installing Adobe CS4 software and was using Google Chrome when it froze. BD 09 is my antivirus with firewall disabled, firewall is Windows Firewall. And all are x64 installations.
I recently reinstalled windows 7 on my laptop, fujitsu siemens and since then, it no longer goes to sleep (either when I close the lid or when I choose sleep from the start menu). This is very annoying it means i have to shut down the maching everytime i am not using it. The problem is that when i close the lid, the machine pretends to go to sleep for about 10 seconds and then restarts. When I reopen the lid, the machine no longer displays. I have to hold down the power button to force a shutdown and then restart.
View 2 Replies View RelatedI've been having a problem for a while that everything is taking longer to load upMy computer startup time has drastically increased, from around 20 seconds (to login screen) to around 40 seconds. Additionally, individual programs take longer to load, too. Where Chrome used to be a nearly instantaneous load, I now have to wait around 10 seconds for it to start up and become responsive. However, after opening each of the programs for the first time (after each computer startup), closing the program and reopening it will result in a normal load time. Only the startup times have been affected; the actual performance is fine.I've already run virus scans (I have Norton Security Suite), chkdsks, tinkered with msconfig, and many others, just short of reinstalling Windows. I'm not too sure what to do now, as a re-installation would take quite a bit of time to create a backup[CODE]
View 4 Replies View RelatedI built my first custom PC about 4 months ago. I bought windows 7 ultimate off Ebay, installed it, entered my product key, installed Microsoft Security Essentials and everything worked fine. At the time it said my copy of windows 7 was genuine.Now 4 months latter my computer randomly pops up with a message telling me my copy is no longer genuine. Microsoft Security Essentials is no longer running, my desktop background has turned black and in the bottom right hand corner of my screen there is a message saying
-"Windows 7
-Build 7600
-This Copy of Windows is not genuine"
As far as I can tell my copy of Windows 7 is genuine. It came with a sealed COA, a proof of License label and holographic discs.
For some several months now I have been happily using the "Pin to Explorer" function as a means of quickly accessing several folders, last night Windows installed a critical update of some sort and on rebooting this morning, right clicking the explorer folder on the task bar showed all my pinned folders gone, I dragged a folder to the task bar and got the "Pin to Windows Explorer" option which I selected, but to no avail, nothing is pinned any longer. I do have "store recently opened programs" checked as well as the second option "store and display recently opened... etc"this seems not to have any effect.I tried a system restore prior to the update, no change.how to restore this function?
View 2 Replies View RelatedThis started, that I noticed, maybe four weeks ago. I select shutdown from the start menu. Desktop starts closing down. Get the waiting for programs screen. Monitor blacks out, All fans stop. Silence.
Sounds good, unless I move the mouse, then everything starts up again. It hasn't actually shutdown, it's more like sleep mode.
The only ways to shut down properly is to hold the start button down on the box or send to sleep and mains power off (on the PSU). To be honest, neither is a preferred way I like to shut down my PC. Apart from anything else I get a lot of "didn't shut down properly" screens with either method, plus I give the Step-Daughter major ear grief for using the power off button to shut down!
My CD/DVD drivers are no longer on my computer. I think I may have lost the drivers. I tired to look for a download but no luck. I have two drivers.
View 2 Replies View Relateda friend was burning movies to DVD that I downloaded from bit torrent and ever since I am unable to open any compressed files-zip, avi, ect. My laptop was re-furbished by Gateway so it did not come w/ OS disc to re-install anything. I have Windows7 home premium 64bit & am not very knowledgeable about computers.
View 2 Replies View RelatedBut as of last week I can no longer send emails. Have been through account setting etc but with no luck. Had service provider on the phone and they tried all sorts of things but no joy.
Only thing that help was making a new account and used, then everything worked for about a day. Then deleted new account and used original one for a day or so then failing to send again..?
Since last week, none of my web browsers (IE, Firefox, Chrome) accept cookies. I went to check their respective settings, they are all set to accept cookies.I own 2 other computers, they all allow me to go to my regular web sites and accept cookies.
View 1 Replies View RelatedI recently installed a problem called EnhanceMySe7en and tried a few tweaks however things didn't really turn out as I had planned.
I made a system restore point before I made the changes, but then when I tried to restore it back, it says there were no points available ... Thats wierd coz I've made 3 restore points over the last 3 days as I've been changing stuff.
Anyways I would love it if anyone knows a possible fix for the problems I've encounterd.
1) The "my computer" link has dissapeared from the start menu (no option to re-add in the startmenu properties)
2) When I open "my computer" shorcut from rocketdock I get no drives showing up
3) Option to add my computer icon to desktop greyed out
4) "My computer" is no longer in the left pane of explorer (libraries and network etc are still there). It means I can't browse to my files. I can only if it lets me type in an address like C:windows etc... but in some browse dialogs I'm locked out completely
5) Another unrelated issue in my shutdown menu. I have logoff, sleep, hibernate, restart options in my shutdown menu, but no shutdown
I suspect with the My Computer issue that its deleted some registry keys pointing to it... please let me know if you have any ideas how to fix it.
I have a problem on my Windows7 laptop when clicking on internet shortcut links..When I try to opening a link, Windows no longer knows what to open it with and tries defaulting to MS Word. I've tried selecting in the usual way and ticking the box to have either IE or Firefox to open them, but it just won't work.
View 1 Replies View RelatedIntel Will No Longer Be Supporting PCI.Starting next year, with H77, Z75, and the Z77 chipsets, Intel will no longer include a PCI controller on their chipsets. After 20 years of service the end of PCI is coming of age. url...
View 7 Replies View RelatedWhat would cause a CD drive to be unable to read a CD it used be able to. Its DVD. Its driver working but may not be newest and the CD won't read shows it being half full but can't get to files how ever it reads other CDs fine. For sure it read just fine before dunno went Web site no new CD drivers. Is there difference between windows versions?
View 4 Replies View RelatedI did have the following setup, on a single drive, two partitions:
345GB: Windows XP (installed first)
120GB: Windows 7
I've made a slight mistake – I've deleted the partition which hosted the MBR for my dual boot setup.
Basically, I have a single hard drive split into two partitions. I thought that I was thoroughly satisfied with Windows 7, so I decided to delete the partition which XP was sitting on. Little did I realise/remember at the time, but the XP partition held all the boot information, thus rendering my newly formed single partition unbootable. I booted GParted to ensure that my partition was intact, and it showed the following:
/dev/sda1 Extended 465GB LBA
/dev/sda5 NTFS 465GB Boot
(I manually flagged /dev/sda5 as 'boot')
This all appeared normal to me, so I put my Windows 7 disc in and attempted the various repair options. In my experience (with XP), FIXMBR from the command prompt usually fixes the issue, in this situation it hasn't. I've also tried 'BootRec.exe /fixmbr' & 'BootRec.exe /fixboot'. None of which seem to work.
My last attempt at fixing this was using the 'Startup repair' option on the Windows 7 disc. This hasn't worked either.
Can someone perhaps kindly offer me a solution? I'd rather not reinstall Windows.
We have been using a Windows 7 machine and an XP machine for some time now - they are using the same workgroup name, and were sharing files using the Public folder on Windows 7, no problems. The XP could also connect to the printer, which is hardwired to the Windows 7.
They are both using wifi in our building. The wifi, which is owned by the landlord, used to be called Ourwifi. A couple weeks ago, the power went out in our building and then there was a problem with the wifi and the internet/cable company came out and changed it. It is now reconfigured as Ourwifi2. It is password protected.
Since that change, both the Windows 7 and XP computers are able to access the wifi and use the internet, but now they cannot share files. As far as I know, nothing on either of the computers settings had changed.
The Windows 7 computer was turned OFF when the power went out; the XP most likely was ON (because that user tends to leave it on all the time). Since I've been trying to reconnect them, I may have changed something by accident.
So here are the settings in the Windows 7:Network and Sharing - Under advanced sharing settings, password protection sharing is OFF under "home or work" as well as under "public." Workgroup is listed as the same one as the XP computer (ourwkgrp). In Windows 7, under active networks, Ourwifi2 is listed as a"work network" Windows 7 has Norton running; I'm unsure if it has had any auto-updates that may have changed accessiblity settings. I can't find in the Norton settings how to add all those TCP and UDP numbers suggested in a post elsewhere that might help it find the XP machine. On the XP machine -- XP can see (or thinks it sees) the Windows 7 computer over the wifi -- if I look at "view workgroup computers" in the XP -- Windows 7 shows up, but if I attempt to connect, I get a message saying it is an invalid path, cannot be viewed over the network.
XP cannot print to the printer connect to Windows 7. It can't see the printer b/c I can't expand the Windows 7 folders that show up under "view workgroup computers."
how to access anything if you send "change this to on," etc.
So, I know this topic has been covered many many times, but this is slightly different.
I had all the computers on the network, a mix of XP SP3, vista and 7 pro of the 32 and b4bit flavors networked and working fine. All of a sudden, i can no longer see the xp computers from the Windows 7, and vice versa. So i thought maybe there was an update that changed the node type (it's happened before on a Windows 7 home comp in the network). All the nodes are hybrid, all still have file sharing and network discovery enabled and my LAN manager is still set to send lm&ntlm.
What's strange is that I can type in the computer name into the address bar and access it fine. But they won't show up on the network map. So, while for a techies like us, who runs IT knows how the users like to have everything the way it was...how to get all the computers back on the network map.
I've been hosting servers on various videogames over the year to play with my friends online, recently I tried a game which worked about a month or so ago (mount and blade: warband, I also tried a few others afterwards) but nobody could connect, I checked everything and it should have been working fine but then I looked at various port checking websites and for some reason none of the ports are open anymore.
I've tried changing the port settings, resetting the router and disabling my firewall and none of them seem to work.
The question now I've worked out that I have Hibernate & Hybrid Sleep enabled (which I think may have been the default) is, should I change it so I can hibernate from the start menu, or should I just put it in sleep mode and let that replace hibernation safe in the knowledge that during a power cut the session from the RAM will in fact be restored?Hybrid sleep sounds like a good idea, but hibernate did always feel a little safer....On another note sleep does take longer to kick in, and also for me (annoyingly) after I press 'sleep' on the start menu, it does eventually wind down (no more fan noise, monitor goes to standby) but only for a split second before 'waking up' immediately.
View 9 Replies View RelatedThe hurricane came and cut the power while the computer was on. power came back on after 3 days. i cut the computer on and it said that startup has failed. so the computer tired to do the auto fix. But then it failed and shut down. I cut the computer back on and i had a horrible long beep maybe a full second. then it sent to system restore because of a windows problem. i tried the restore but then that failed because a steam file. when that was finish its sent to log into computer. at this point i am confused because im on the computer when it say that start up has failed. i didn't know what esle to do so i just shut down the computer and cut it back on and the long beep was gone. it started up as normal. However under system it say that i have 8 days to activate windows.
View 9 Replies View RelatedI purchased the full version of Windows 7 Home premium for my new build in March.I bought the full version rather then the OEM so I wouldn't have to answer to Big Brother Bill if I ever wanted to upgrade my computer.Since I live in a remote area with internet access limited to ~ 1kB/sec dial up, I activated Windows by phone, then used WSUS Offline Update to install the updates that I downloaded at work.
Yesterday I got the message that my copy of Windows is not genuine.I've spent hours on the phone with MS tech support to no success.When I attempt to activate either by phone or online the required alphanumeric code is missing in the activation dialog.Is there no option left other than reformating the HD and starting all over?
I don't get the device not recognized. When I plug device into usb nothing happens
View 2 Replies View RelatedI was dual booting XP and 7, and after I reformatted my XP partition I no longer get to choose which os during booting. It automatically boots XP. How do get back the screen that lets me choose between XP and 7?
View 4 Replies View RelatedSo just a few minutes ago my desktop was running fine and all. I was opening and reading documents off my flash drive when all of a sudden it turned off and proceeded to restart. Upon passing the POST screen, it comes to an error page that says boot device not found. Just FYI I have a WD 250GB boot drive and two additional Samsung 1TB drives set up in RAID 1 NTFS. So I look in BIOS for my boot drive and find it there and it says its working. However, when I try to set the WD boot drive as the first boot device, it does not show it as an option at all. Only my raid drive shows up along with removable drive, and cd drive.I need some ideas as to what could have caused this. The WD drive is a few years old, but I don't think the drive would have just died like that; there were no previous cues for the hard drive starting to fail. It still shows up in BIOS and powers up.I wanna hope that the MBR was somehow corrupted, which should be an easy repair I think if I can get my hands on the ISO file. Also, it's Windows 7 Ultimate 64 bit
View 4 Replies View RelatedI upgraded from windows vista home premium to windows 7 ultimate. Now my tsstcorp ts-t632a cd/dvdw device no longer works. I uninstalled the device and drivers then restarted my computer. That did not work.
View 1 Replies View RelatedWhy am I no longer able to connect to Windows 7?
View 8 Replies View RelatedSeveral days ago I was looking into OC'ing my 2500K and after reading through a few guides and getting some advise from people I went into my MB's BIOS and modified sveral settings then tried to restart my system but upon rebooting I found that I could no longer load up Windows 7 which is installed on my main HDD. Whenever I tried booting into Windows 7 I would get the image from the motherboard that gives you the option to load into the BIOS or change boot orders etc then I would get the option to choose which OS I want to load (I've got Windows 8 Release Preview installed on my second HDD), then whenever I choose to load Windows 7 I will just get a black screen and eventually different coloured specs start appearing along the first few rows of pixels. Strangely Windows 8 loads up perfectly fine and I can even access files off my Windows 7 HDD through Windows 8.
View 1 Replies View RelatedMicrosoft installed some Windows 7 updates recenly and now my CD/DVD drive isn't listed as a Drive in the " Computer" window. I can play and burn cd's but it doesn't list it as a drive until I insert media.I'm on a HP laptop runing WINDOWS 7 64BIT .
View 2 Replies View Related
