How To Reboot Asus K53e
Sep 1, 2012my asus k53e laptop won't boot. the asus logo comes up and it goes to black screen. I tried all of the "f keys". asus no longer supplies backup disk.
View 1 Repliesmy asus k53e laptop won't boot. the asus logo comes up and it goes to black screen. I tried all of the "f keys". asus no longer supplies backup disk.
View 1 RepliesMy linkMy errors and updates are all stated there, however I will also continue anything I restarted the process. This time, during the startup of the computer I repeatedly tapped Esc. then selected my P2 HL-DT-STDVDRAM GT34N and pressed enter. This was followed up by the usual "Windows is loading files..." progress bar. Afterwards, it sat at the "Starting Windows" screen for eight minutes. It loads a basic ASUS wallpaper and cursor. I am then confronted with the prompt: AI RECOVERY-Are you ready to restore this image yes/no?I select yes.AI RECOVERY:Restoring it will overwrite your hard drive. Do you want to continue? Ok/cancelI select ok. The AI Recovery Restore begins-This DVD will help you recover hidden partition. Check the AC adapter connection and do not interrupt the restoration process.
View 5 Replies View RelatedI purchased my laptop about 3 weeks ago and have been using it to stream online classes I'm taking. I'm using an ASUS K53E notebook which was purchased at a local Best Buy. It is running Windows 7 Ultimate x64 and I have Kaspersky PURE installed on my computer.
For the first 2-2.5 weeks of usage, the laptop has been as smooth as can be. However, as of last Friday (9/2), I noticed that the laptop would crash every time I shut it. The screen would go black, like it's going to hibernate, but the hard disk would never shut down (green lights on the front of the laptop stayed on) and I would either have to manually power down the laptop or wait for it to get BSOD and then shut itself down. I have since stopped hibernating it and shutting it down completely each night, but it's getting extremely frustrating and worrisome that at some point, the laptop will become completely useless.
I've looked through the forums already and seen that others have been having this problem. If this has been resolved, can I ask what others have done to get rid of the BSOD? I have not attached my BSOD crash report, as I have not copied it yet nor do I really want to cause another BSOD just for the report.
I bought this laptop on 1-7-12 from best buy with the geek squad setup (laptop i wanted but they only had it with the set up). I have been trying to use the factory partition on the hard drive to restore back to the factory setting but it stalls at a number of certain points. If I start windows normally it stalls at "Setup is Starting services screen" it never freezes completely it just never progress after 2 hours. I also had it freeze at installing new devices 46%. It also has failed at the "Factory Installation in progress do not operate..." I know this process restarts the computer multiple time but after one of the restarts it came up with a very big error text with red coloring. I have used the geek squad restoration discs also and it got caught up on the same points.
View 1 Replies View RelatedI dont have recovery disk for my asus eee pc x101h
View 2 Replies View RelatedI reformatted my hard drive to install a copy of Windows 7 Ultimate, 64bit (I had Windows 7 Premium, 64bit before) and the installation ran just fine. After the installation, it boots up to what I guess is the desktop, waits a few moments, then just reboots. Every time before it boots it goes to the "Windows is loading files..." screen. I also tried 32bit, but got the same results. If you need more information, just ask and I'll be glad to provide it for you. A USB stick was used to install.
View 9 Replies View Relatedcan i download free audio driver for my pc
View 2 Replies View Relatedupgraded frpm asus P6T to asus P6T deluxe 2, do i need to reformat?
View 5 Replies View RelatedI don't want anything too crazy, just something I can take with me on my IT jobs...
I've narrowed it down to these two...
AMD - Asus X5 Laptop - Laptops at Ebuyer
and
Intel - Asus X5DIJ Laptop - Laptops at Ebuyer
The main differences from what I can see is. The Intel has the extra gig of RAM but the AMD has the better graphics chip.
I do not know how the CPU's compare.
I would be ever so grateful for some good advice.
My computer hard drive crashed a week ago and most of my back-ups went with the system. So, I got a new 500 GB drive and have been re-installing everything from scratch. I started with a clean install of Windows XP (service pack 2), which took forever to get all the up-dates done. Then I upgraded to Windows 7 and did the up-dates for that. I didn't make a recovery disk at this point because I wanted to get everything installed first.Unfortunately, the last time I went to reboot it failed. When I power-up the computer it stalls out on the Dell BIOS screen. I can't get into Safe Mode, Setup, or the Boot Menu because my keyboard and mouses are not working. They are both USB and none of my USB ports are working. (Also, I have not PS/2 ports on my machine.).
View 5 Replies View Relatedmy pc shows reboot and select proper boot device or insert boot media in selected boot device and press a key how can i collect my data.
View 1 Replies View RelatedI just reinstalled W7Ultimate so i can do a clean install of SP1 but before i installed the sp1 i get this error when i reboot.
View 1 Replies View RelatedThe reason I ended up there was because I was getting a problem where, at random times during random programs, the computer would lose signal to the monitor... Pause for a while, then reboot. Figuring I might have old hardware profiles that needed updating, I went to check my windows updater and found it was disabled... A short series of checks and Gringo was head to head with a Zero Acess Infection, which he promptly kicked the backside of.However, since then, the black screen issue has returned. It seems it wasn't Malware related. It doesn't seem to have any obvious pattern. Sometimes it happens when nothing it happening at all, and when I get back to the computer there is just an error log.Sometimes it happens twice in a row, sometimes not for hours. CPU and GPU seem to be at normal tempsWhen windows reboots it has the following error log: Problem signature: Problem Event Name[CODE]
View 14 Replies View RelatedDoes anyone know of a software available that lets you reboot from Windows and choose another OS besides the auto default, in a multiboot scenario?
I need something like this because I Dameware into my other computer a lot and would like to be able to get it to boot to another OS than default, remotely.
I guess I could use EasyBCD to change the default OS when I want to reboot but hoping to do this without editing bcd.
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again. Oh my Bios is set up correctly in case any one asks.
View 2 Replies View RelatedI remember a functionality in Vista/XP where you could hold the SHIFT button for a warm reboot which effectively avoided having to go through BIOS POST.
I have tried this in Windows 7 however no luck.
Has this been removed? if so that suck cause i have a RAID controller which takes a long time to go through all of its tests/init.
Anyone?
I was running Windows XP and kept the system up for weeks on end. I just installed Windows 7 7600 last night and throughout the night the system will just restart. I saw some "power" labeled things in the event viewer mostly some wake on things with an "unknown" source but honestly it's not shedding much light on things. Is there anything I can do, change or install that will monitor why this happens?
View 7 Replies View RelatedI just updated Windows 7048 to 7057. It worked perfectly except
that whenever I reboot an empty notepad screen appears which is
labeled " desktop.ini - Notepad " .
I Cannot find anything in the desktop file which would cause this.
I got a bsod after i rebooted i didnt even make it to startup omg why! It took me to tartup repair but the attemping repairs is endless.
View 1 Replies View RelatedI have been following the progress of Windows 7 through beta stages. I currently operate on Windows XP SP3 which runs great, however Ive very recently decided to go for WIndows 7 beta. I completely backed up all my information, booted from DVD, formatted and then started to install.
It copies/ expands all the files to 100%, then does a normal restart, It then comes up with starting windows> registering entries etc, the carries on finalising the install only to reboot itself?
After the reboot it gives me the windows recovery screen. If it tries to boot up it just goes into a reboot loop. I am sooo confused.
The thing is I would say I know my way around PC software and Hardware very well. I have tried different BIOS settings, Optimising defaults, Load-Fail Safe Defaults, Creating New Partitions etc.
I've been trying to install Windows 7 on a brand new computer. It's running RAID 0, and I'm using the latest drivers from my motherboard manufacturer.
Starting up the installation seems to work fine. It goes through the first phase of installation where I choose which partition I want to use, and it starts to copy files from the dvd, yada yada yada. After the "installing updates" section, a window pops up with the following message:
"Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation."
It then kicks me back to the start of installation. If I start the install again, it does the same thing. If I reboot and restart installation, also the same.
If I try a startup repair, I get a message saying that Startup Repair cannot repair this computer automatically.
I've tried this on two builds--7000 and 7077. Both have the same result.
Whats your Restart Time?
View 9 Replies View RelatedHave installed Realtek Semi. Corp.,
Driver date: 10/28/2009
Driver version: 6.0.1.5969
All functions work fine, but when I reboot Windows 7, after the reboot the audio volume is set to max (100%); this does not happen when rebooting into Vista Ultimate x64 or XP Pro x32.
I followed the turorial and tried three or four times to make a VHD and it works but upon re-booting my PC the VHD I created is gone. I can get it back by re-attaching it but reboot and it's gone again.Oh my Bios is set up correctly in case any one asks.
View 9 Replies View RelatedOnce i reboot my computer I get the issue shown in the picture attached.
In order to fix it, I go into the screen resolution and change it. Everything will go back to normal and I will then revert it back to the original. It's a tough thing to explain, so I havnt done much googling. any ideas?
Oh and it started happening after I added the RSS feed. I have tried removing it but it doesn't seem to help.
I have a Dell Inspiron 1440, and after it crashed while I was out for Dinner yesterday, I have been encountering so many problems..Yesterday, I was able to get back into my "Account" and access my desktop, but after a few minutes of being on, every single program/application I had opened turned "Not Responding" and stayed that way.
Now today.. I thought it had gotten better, so I did virus scans, registry updates, defragmenting, all of that, and my Laptop worked fine for a few hours. Then it became worse.
I scheduled a Disk Check, and when it finished, it restarted my laptop, but after the Windows Logo that pops up, all I get is a black screen and a cursor that I can move around. This not only occurs in Normal Mode, but Safe Mode, Safe Mode + Network, and Safe Mode + Command Prompt
Before I go along with my rant, I'm not a computer expert nor near one. I'll try to provide as much information as I know/have. I'm desperate for any answer and if this is located in the incorrect aI have a Lenovo Windows 7 64-bit laptop. I currently have 4.00GB of RAM ( 3.80GB usable ), my processor is Intel(R) Pentium(R) CPU P6100 @ 2.00GHz.I've always had problems with my two USB slots and the bottom one stopped working all together. Last night, after pushing my USB cord in the incorrect slot, I heard a crack. After replugging my mouse into the correct USB slot, it would not work. After rebooting my computer, it completely slowed down as if someone recorded what I was doing on the computer and played it in slow-motion.
Start up took about 5 minutes and was quite sluggish. It told me to pick an OS and my choices were either "7" and I forgot the other option, unfortunately. Freaking out, I tried to shut it back off, but once I took my finger off the button, it turned on automatically no matter how long I held it down. This time it asked if I wanted to " repair ( recommended ) " or start normally. I chose to repair my computer and it showed no difference.When I finally got on my name I right away noticed the sluggish performance. Again, it was like my actions were being performed in slow motion. I turned on some music and instead of hearing some lovely piano, I heard a completely lagged song. When getting on my internet ( which I'm still struggling with at this moment ) it took me nearly half an hour just to create an account here, when usually I'd be done lickity split.
I was told by a few friends who are knowledgeable with computers that the USB cannot effect the actual hardware. I'm afraid that, that crack I heard at least did something, since right before I restarted the computer it was working fast and perfectly. Mind you, this computer is only 6 months old.I restored my computer and it made no difference. I check for viruses and malware everyday ( using Spybot, microsoft essentials and malwarebytes anti-malware ) and my results came clean. I'm sorry for the long rant, but I tried to provide as much information as I could. I did try contacting Lenovo, but I do not have a phone nor a cell phone due to financial reasoning and that's the ONLY way to contact their tech support.
When I first use my Drive E and insert a disc it works fine. When insert a second disc later I keep getting the information from the first disc and cannot use Drive E for another disc until I reboot. I do have another drive (F) but would really like to resolve this problem.
View 8 Replies View RelatedThe problem is minor and it's just a bit of an annoyance I've been dealing with from time to time.[CODE]Basically, If I were to I put my computer to sleep(using the sleep function, not hibernate) and try to wake it up within a few seconds, the computer would go into an automatic reboot loop that would continue to boot, shut down, boot, shut down until I turn off the PSU completely. I'm trying to figure out which component might be causing this problem, if any. I've updated my bios, drivers, and ran memtest but nothing seemed out of the ordinary and it didn't fix the problem.
View 2 Replies View RelatedI have attempted to install Windows 7 a couple of times now (with different copies each time) and I keep getting the same problem:Everything goes very smoothly for the most part. It finishes the installation, and then goes to reboot. When it attempts to load up Windows 7 the first time, I get the black screen that asks what mode to start windows in (Safe Mode, Start Normally, etc) and I choose start normally. It then brings up the Win 7 startup screen, but pops up with an error that explains that the computer was rebooted unexpectedly and the install did not complete.From this point, all I can do is click the "ok" button (the only option given in the dialog box) which just restarts the computer. If I just let it go and don't touch anything, it brings me back to the exact same message. This happens infinitely. My only other option is to boot from CD again, which lets me start the install all over again. But this still just results in the same error. I ended up just re-installing XP so that I could try and find a fix for the issue.
View 6 Replies View RelatedAfter about each second/third reboot one of my 6 hard drives become read only. It usually happen to a random drive (though, so far drive where W7 is installed never had that disease, yet) . I can't change any files on that drive and even right click option "New" is missing too (meaning I can't create new folders, files, etc.) The drive stays read only until I run check disk with "automatic fix file system errors" enabled. (UPDATE: it worked only once, after that I had to clear up readonly attribute with diskpart shell command)I don't recall ever seeing W7 do scan disk at startup, but I've seen XP doing that, but XP does it usually to one HDD,because of one faulty program I'm using on it. So, I'm not sure if W7 even has that scan at boot feature at all...If for some reason it decided mark a hdd as "dirty", then why not scan it at boot as XP does?
View 2 Replies View Related