have windows xp installed earlier but i installed windows 7 but now i want to install windows xp.when i insert windows xp disc then it says some hardware error or something and rhe screen turns black..
View 1 Replies
I want to know how to format my C when I want to install Windows 7?When I format it normaly it formats, I think, very quick like on XP when you choose to format in NTFS quick way which I don't want so how to truly format my C partition?
View 9 Replies View Relatedsomething needed to be updated on his computer, so it was, then his computer crashed.then when it was starting up, when it started loading Windows, it would do a startup repair thingy. I tried everything I could to fix it, nothing worked. I reset/reformatted the hardware or whatever (the one that saves personal files) then when it reformatted and restarted, it would start reinstalling Windows (7 of course) and I keep getting an error message on a screen with the words 'Setup is starting services' that says 'Windows could not complete the installation. To install Windows on this, computer, restart the application.' so I do, and then the same error message pops up after a split second again.He has a Dell (I believe,) Aspire, Intel Pentium t4500, intel GMA 4500MHD. That's all I can find out by looking at the sticker stuck inside the laptop.I wouldve come here before the format, but I barely found out about this website 20 minutes ago. Also I can run the system checker application thig for obvious reasons,
View 14 Replies View RelatedI recently received a new XFX 780i in the mail via their RMA service. I expected when I hooked it up to have to do a System Repair. After the repair, something went wrong and the boot manager was not detected. Went to repair again and Windows 7 was missing from the list of OS's. Decided to try to salvage what was left on the remaining partitions and do a fresh install on the main one.I go to format the drive and I received an error saying that it could not format the partition, error code 0x80070057. I received this same message when I try to install the OS.I tried a brand new Seagate 1TB and received the same error.I tried a IDE WD 120GB HDD thinking there may be something wrong with the SATA controllers drivers with the same result.Do I need to use the load drivers option when I am at the partition screen of installation? I have visited the Seagate website and they say they don't have drivers because the OS and motherboard contains the necessary information.So which drivers should I load? I tried to load the nForce drivers (I have a nvidia northbridge) and I can find the SATA controller drivers but the result is the same.Can someone maybe shed some light on what this error is about. I have read elsewhere people have issues with this error when dealing with Windows Update, but that doesn't seem to be the case.
View 7 Replies View RelatedI use a 1.5 year old aces aspire 5738z and I think it just died on me. Here is what happens. Whatever I do it cannot stay without a BSOD for more than 10 minutes. I tried reinstalling drivers and it did not change anything so I tried several things but finally just formated it and installed windows again. I actually got a BSOD while installing windows from an original CD so im pretty sure my problem is hardware related. I did a check of the ram with Memtest for approx 45 minutes (one full cycle) and found nothing. I did a quick test of the HD with an other program and it did not find anything either so im starting to think its the graphics card that is dying.
Here are some specs
Core Duo T4200
Mobile Intel GM45 Express
2x 2048MB
I am having real issues installing Windows 7, Home premium 64mb. Have formatted & clean installed it 6 times now. The PC is a new build so the HDD is fresh. It installs ok, then when asked I use my name as user name, Jon, cant type that wrong. I don't set a password just yet as I am the only user. Windows then takes me to a log in screen. I enter user name, wont let me in..!? Says incorrect password or user name!
I try to log in as Admin, I know now its disabled by default. I can get into Windows via the safe mode, so I used the command prompt to enable the Admin, yet when I went to log in as Admin, it was disabled! So I pretty much get locked out of my pc every time I install. Am I missing something simple? I cant find any answers except on how to switch on the Admin which didn't work...
I just formatted my C-Drive and installed a fresh copy of windows 7 ultimate on it. After restart, I got the following screen - See image attached. Now Windows can't boot at all. I tried using a system repair disk but it doesn't work. I doubt if it is a hardware problem, since I can access the boot menu and its options, but as I said, running the repair disk fails, I keep on getting that screen when it restarts.
View 4 Replies View RelatedWindows 7 cannot format memory card message appear window was unable to format
View 1 Replies View RelatedCan I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
View 4 Replies View RelatedIt seems like no matter what I do, I cannot get rid of Win 8. I have the discs and product key for Windows 7, I have changed the boot order in the bios, and I have even tried to just install Windows 7 over 8 (Yeah, I know... bad idea). Nothing works.
It seems that when starting the computer, it scans the disc and then loads Win 8 anyway. Is there a way to force the disc to be read upon start up? Or can I just format Win 8 and get to a dos prompt?
how i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
View 1 Replies View Relatedmy usb is failing to format am getting a msg windows cannot format
View 1 Replies View RelatedI have bought an old PC just for the case. It has an 80gb drive in it, so I thought I would use that for a new Vista I had lying around.I installed a new motherboard/cpu/ram combo I had (all working well prior).When I fire it up, the old drive had versions of both XP and 2000. However, both are corrupted an none will boot. The PC goes into a reboot loop each time, regardless of what I try. I have set the bios to boot from the cd drive with the MS original copy Vista, but it refuses to do so.Any way I can force the boot from the CD drive - or force a reformat? I cannot get to a command prompt, even trying safe mode.No biggy as I will just use another drive (once returned from Seagate), but it is a bit annoying not being able to do this. Perhaps the drive itself is corrupted?
View 8 Replies View RelatedI'm trying to install windows 7 64bit OEM but in the custom install options i can't format the partition i want to install to. The partitions were created under XP on a secondary drive, which will now be the primary drive, XP will be wiped later and that drive i have actually disconnected for the time being. The only options i can access are "refresh" and "load driver"
I'm not too sure whether i need an updated sata driver controller (asus M2N AM2 mobo - nforce controller) or i need to make the partition active using something like the diskpart utility.I've looked at the asus website and there are no updated sata drivers for windows 7 or even vista 64bit, only a beta raid driver.
Or is it the partitions themselves since they were created under XP (although i don't think its this)I've found some posts on here with similair sounding problems but hoping someone with a bit more knowledge can tell me which is most likely to be the cause and save me a bit of time.
I'm planning to format my computer tonight and was wondering which programs I should install after. I don't mean browsers and stuff like that, just software that effects performance.So far I've got Catalyst software suit and CAP from url... ready, as well as DX11. So do I need anything else like sound drivers or motherboard drivers? Or are they in the catalyst pack? I'm installing Win7 64bit btw.
-ATI Radeon HD 5850 1GB
-AMD Phenom II X4 965 Black Edition, 3,4GHz, Quad-Core, S-AM3
-4GB RAM
-ASUS M4A785T-M AM3/PCIE/V512/S/R/HT5200
I clean formatted my Toshiba satellite L745d -s4230 (psk16u) with amd radeon 6520g , a6-3400 vision apu with radeon ,HD graphics 1.40 GHz4gb ramwindows 7 home premium 64-bitI played heroes of newerth on my laptop ,but after formatting it I experienced some lag in game.
View 6 Replies View RelatedI just tested this with Windows 7 Upgrade disk:
MS makes it clear that using Windows 7 Upgrade disk with XP requires a clean (Custom) install, which most people assume means over the same XP. This can be done, and places your files in windows.old for redistribution. This is only an option for Vista, since you can do an in-place upgrade which reinstalls your programs, files and settings.
You can also direct the clean install to another formatted partition or second primary formatted HDD which allows for a cleaner install. The problem is that you may still have XP in the first partition on the same HDD, which you probably will not want for long, and a laptop is hard to connect to a second HDD. Plus, an OS in an outer HDD partition takes a fraction longer to be read by the laser.
But there is a way to install from XP with an Upgrade disk to to a clean formatted first partition. Here is the way I did it:
Use a Partition manager like Paragon or Easeus to copy your XP partition over to a partition other than the first (or install XP to another partition) then use EasyBCD to Add it to the Boot Menu if necessary.
Now comes the hat trick: Boot into the new XP partition and use Disk Management to mark it active, then go to Control Panel>Folder options and show hidden system files. Make sure boot.ini, ntldr, and ntdetect.com are in the roots of both OS drives so you can boot back into XP later.
Now delete and format the first partition using Disk Management (or Easeus) from the XP desktop, then without rebooting install WIndows 7 to the first partition. After install, you can copy files over from XP via explorer and then hide or delete the XP partition, because you now have the best operating system ever and it's installed on formatted metal from an Upgrade disk.
Be sure to use Windows 7's great new imaging backup to image your installation after you get it like you want it, so you'll never have to reinstall again.
So I cannot format my secondary hard drive where Windows 7 RC was installed. Did I install Windows 7 incorrectly onto my system? I've posted a screenshot from my Computer Management window.
View 4 Replies View RelatedSo I was not sure about Windows 7 and I have a PC with 2 physically separate internal hard drives. So I retained my vista OS on my C:/ drive (named OS) and did a clean install of windows 7 (using an upgrade disc student edition) on my D:/ drive (DATA).
After setting up, using and liking windows 7, I want to eliminate my vista system, which is boated now, completely. However, apparently with an intel chipset, I can't simply format the OS drive using the disc management utility, even though when I boot windows 7, it is renamed the D:/ drive because the bootloader is on the OS drive. I have tried changing the DATA drive to an active, bootable drive in disc manager. Unfortunately, I can't seem to make it the primary partition.
Originally found this forum on google with a hit on help: cannot reformat c drive
useful information, but I am not completely sure what it means.
After spending about a week customizing my Windows 7 install, I am not too happy about the possibility having to reinstall on the OS drive and go from there. What method should I use to format my OS drive, and still be able to boot the DATA drive. I would then like to use my OS drive for storing music, and pictures, etc.
I have an external HD to work with. I suppose I could image the DATA drive with the Windows 7 install, format the OS drive, and then restore the image to the C drive, but that still leaves the problem of how to format the OS drive in the first place. Also, I've never done a recovery from image before, and am not big on the prospect.
My 3TB drive is only showing up as 1.99TB... I remember, but don't quote me when I was installing this Win 7 Ultimate (GENUINE) disc to my comp, it said something like "Windows cannot use over 2TB" or something..I can go into disk partition and try to extend it but this happens.Also another thing I'm noticing is that the total (2048GB+700ish GB does not = 3000GB... It's labled on the drive itself "3000GB"..Is that just the comp. using it to know it's there? (I know that sounds idiotic.)So I'd love some help, and if need be I can format my drive in a heartbeat.So your saying I should fresh install and choose GPT format? I honestly have NO! problems doing that if it needs to be done.
View 13 Replies View RelatedOnce you get to the Custom (Advanced) tab of Windows 7 clean install there are options to delete the partition, format, etc. Assuming I want to delete all of my partitions so that I have one large volume C: is it best to delete the partitions first and then format? Why would someone do one over the other (or both?) Right now I have a C: partition and a D:RECOVERY partition. I want to delete the D: partition and combine it to the C: partition.Don't they do the same thing? Why do you need to format after you delete a partition ? Do I also delete the C: partition and "re-create" it? What about the term "Unallocated Space"
View 9 Replies View RelatedIs it possible to use the upgrade disc to format C drive (it has the Windows 7 RC activated, I can also reinstall Windows Vista if I have to), and do a clean install?
View 8 Replies View RelatedI have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057
View 3 Replies View RelatedI'm well aware that you can boot from the CD and do a quick format during Windows 7 installation, but that's not what I need. I want wipe the disk in it's entirety before installing Windows. I'm getting some weird messages about disk errors during start-up and the EVGA tech support suggested that my last fresh install (done earlier today) didn't remove everything that was on the hard drive. I can't remember what he called it, but he said it could be less than a kb and cause the motherboard to try and boot from a partition that doesn't exist, giving me the errors. Is there some kind of formatting utility I can burn to a disc and wipe my local disk with?
View 6 Replies View Relatedi am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
View 2 Replies View RelatedI had bought new laptop. At that I have two drives and I locked one of them with the bitlocker and later on I just deleted that drive from disk management. Now I cannot create partition, I have more than 160 GB and system does not allow me to install a fresh copy and neither it allows me create a partition. What should I do?
View 3 Replies View RelatedIf I use a commercial software like Drive Scrubber to clean my HD, will a Win 7 Upgrade Discboot ? I want to eliminate any possible virus/malware. Is there any advantage to using commercial software to format, or is the reinstall format listed in the tutorials as effective? My concern is that Kaspersky Internet Security 2012 (KIS) had corrupted data bases and after removal and reinstallation did not perform well. I could not download anything, e.g. CCleaner and received Certificate Error questions on certain websites. Also, I would like a fresh registry to insure previous programs like Chrome, Firefox, KIS, remnants are eliminated.
View 2 Replies View RelatedI have a few questions and one of them is, what is the difference between an unconditional format and a diskpart's Clean All in the command prompt. When I read their definitions online I don't know what they differ in.
View 9 Replies View RelatedMy drive passed SMART extended self test that scans the entire disk surface. Is the full format with command FORMAT FS=NTFS overkill?
View 4 Replies View Relatedi've purchased a seagate 1TB external hard drive and need to format it in FAT32 format.
View 9 Replies View RelatedI am giving Fedora (Ext4) the boot from my 150G VelociRaptor and replacing it with Windows 7.What is the difference between a 'Quick' format and a 'Full' format. Does a quick format simply rewrite the FAT and a full format write 0's to the sectors? The reason I ask, is that I am concerned that the Linux Ext4 formatting may leave artifacts which I can do without. So, bite the bullet and go the long route, have lunch and a nap or take the quick way out?
View 7 Replies View Related
