Display Screen Is Smaller Than Monitor Screen
Jun 4, 2012my display screen does not fit my monitor and i dont know how to make it fit it is a 1920x1080 ASUS VS239H
View 6 Repliesmy display screen does not fit my monitor and i dont know how to make it fit it is a 1920x1080 ASUS VS239H
View 6 RepliesI got a new video card at work to install and nothing will show up when I plug it in. I can go through the computers VGA and it works fine, but when I go to the video card only a black screen. Any help? Can't download drivers either, only black screen upon boot.
View 8 Replies View RelatedThe screen will suddenly have larger type, later, smaller, etc.
View 1 Replies View RelatedI experience a serious reoccurring issue with Windows 7 window management. It happens 1 in 5 times when logging in after locking the screen (or putting the machine to standby).
Windows are restricted to a part of the whole desktop. Please note that the explorer window in the attached picture is maximized, but not occupying the whole desktop as expected! (In fact I can move windows to the right side, but not maximize to it. Also when moving windows there, it snaps *not* to the edge of the screen but to to the same wrong line where the edge of the maximized window is.)
What is this? What causes this? How can I disable this? Only restart helps by now..
I have 2 monitors set up,
Primary: Samsung Syncmaster 19 Inch widesreen 1400 * 900
Secondary: LG E2541 25 Inch Widescreen 1980 * 1080
OS: Windows 7 64bit
VideoCard: Nvidia Geforce 560 Ti
I use my primary mostly for browsing, msn, music players, Ventrilo etc etc,I want to use my secondary Monitor for gaming Watching Videos.However, when i want to use something Full screen on my secondary monitor it goes full screen on the primary monitor.
I cant also run it in windowed mode and stretch it out to full screen, it does not allow me to do that, it goes back to the size of my primary Monitor.
Ps.I want this since i play mostly with fullscreen borderless or in windowed mode so i can still browse the internet or adjust music/ventrillo settings. I dont want to have an Taskbar below the game, so thats why i need it on the Second Monitor.
My screen show box display rather than full screen size after downloading Microsoft Windows 7, how can I get Full screen size
View 1 Replies View Relatedi find that my windows and desktop are bigger than my screen
how do i sort out the problem?
i have a 19 wide screen 1440 x 940
The image is smaller than the monator. There is an inch border on both sides
View 2 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedStreaming television from my home country, I can choose the stream quality from 300 kbps to 8 Mbps:
If I choose 1 or 2 Mbps, the stream is opened in a flash player. Since yesterday I've had this strange issue. The full screen display is shown smaller than usual, because a big part of the picture is used by a message telling I should download Flash Player to see the stream.
But I have Flash Player installed and I can see the stream! This issue is not browser dependant, it's the same when using Chrome, FF or IE to access the site.
A call to the this TV-stream service providers help desk resulted the following email: "The system is not yet tested on Windows 7". I've been using this service a couple of years now, on Seven since January but this issue only started yesterday.
How do I get my full screen back, without this annoying message?
We are using some Lenovo Q180's as media players for digital signage. For the most part they have all been working fine except for 2. Randomly, the signage presentation will re-size itself and move into the upper left corner. This happens randomly and not at the same times each day. They are hooked up to a LED tv via HDMI. I have tried switching the HDMI cables, ensuring all drivers are current and tried most all the basic troubleshooting. A simple re-start will get everything back looking and running fine. Again, this is a digital signage application so we cannot tell if this has occurred until the client calls to let us know which is not good for us.
View 1 Replies View Relatedafter i installed windows 7 now the display is not taken up the whole screen on my laptop any ideas.
View 9 Replies View RelatedMotherboard: MSI Z68A-G45
Nvidia GTX 580 (Latest 285.62 Drivers)
Windows 7 64 Bit
I've had this computer about 2 months and everything was working great until today. This problem started out of nowhere. I didn't mess around with drivers etc.
Anyway, when I switch on my computer, the bios screen loads up..followed by the Windows 7 loading splash screen. Then just when the welcome screen should appear, my monitor turns to standby and says that it's not receiving an input signal.
I booted in safe mode and removed the drivers. I restarted my PC and it worked and my desktop appeared. However when i install the drivers again and restart the computer as required by the driver installation..the same problem as above reappears.
My monitor is connected via a HDMI cable to the GTX 580.
EDIT: When I go to device manager and right click the GTX 580..there is an option to roll back drivers. I clicked this and it now shows as a VGA Adapter. I restarted and my computer booted up...but obviously in low resolution as no previous drivers were ever installed since i bought the PC with up to date drivers.
I also just installed 290.53 BETA drivers. Restarted and my computer now just hangs at the welcome screen. I can still boot in safe mode which is how i'm managing to write this.
my new laptop's screen has a weird stain at the bottom, I can't get rid of it can you guys tell me what is it and how can I fix it myself? I still got the warranty but I don't want to send the laptop to repair because It's too much trouble there must be a way I can fix it myself so
Here's a picture of the stain I took 4 different pictures and put them together in 1 single picture.. (stain is in the middle)
I have a dual monitor setup, with a 1280x1024 VGA monitor coupled with a DVI 1920x1080 monitor. I use the 1920x1080 one as primary, because I like to play a few videogames and they're much better on the widescreen (and higher res).
However, I'd like to be able to display the windows 7 logon screen on the secondary (vga) monitor, it's just a minor bug but I'd like it that way because whenever I wake up my computer, the vga monitor wakes up almost instantly but the widescreen seems to take a few seconds to wake up, and I'd like to be able to input my password and start using my PC right away - I use an nvidia card if that means anything (maybe the ati drivers support it but not nvidia I don't know).
This am I booted my computer to; find everything was twice the size it usually is there by requiring me to scroll right to left and from up to down to read my home page.
View 4 Replies View RelatedBasically I have an acer aspire z5761 all in one pc and I installed the hdmi pci card. After it was installed I plugged in my hdmi cable from my xbox to my pc, my only problem is, how do I display the xbox on my screen? When I turn on my computer it runs normally as if it would, is there a button or something for me to switch mode?
View 1 Replies View RelatedI just recently noticed that my screen will black out for a few seconds and come back, and when it does it changes my monitor set up so that 2 is main monitor and 1 is the off monitor, I tried changing it so it only showed monitor 1 but it still seems to be blinking.
View 1 Replies View RelatedMy screen saver will not come on and the monitor is not turning off, even though I've set it using the advanced power settings. Also, when I put the computer into Hibernate mode, it always turns itself back on, usually in the middle of the night.
View 3 Replies View RelatedOf course, it is easy to get a print screen of my primary monitor, but how do I get one on my secondary? Simply clicking on it's background doesn't work.
View 8 Replies View RelatedI have just installed a dual monitor set-up on my PC. 1 connected with DVI and the other with HDMI. While using both screens 1 has a yellow tint (the right screen) but when I switch back to using just the single monitor (left screen) then that screen has the yellow tint?
View 4 Replies View Relatedmy laptop has an ati x1600 mobility card and is outputting via hdmi (mini dvi-actually) to an ASUS VH242H (full 1080p) monitor. When I had this connected running xp I had not problem with the screen resolution and size, but now that I'm running windows 7 the 1920x1080 resolution is available, but the picture doesn't fill the whole screen, there is like a 1" black box around the displayed screen.
I believe it has something to do with my display driver, I'm currently using the one provided by windows update.
My problem is that if I connect the computer via DVI to a display it functions normally, but when I hook it up via HDMI to my Flat screen, it doesn't show the splash screen that gives you the option to enter bios. The screen just stays black until the windows welcome screen(win 7 64bit) comes up, then it acts totaly normal from that point. When I try to press the del key during the boot, I believe it is entering the bios, but the screen remains black so I can't see anything. I am guessing that the MB is not sending the signal to the Flat Screen until it loads windows, but can't find out anywhere that confirms that or what to do in order to resolve it.
View 1 Replies View RelatedI am running 2 monitors on my tv and second monitor in my living room. On the second monitor set up, which has a wenbcam set up through wineows explorer. The problem arises when my screen saver kicks in. It tuen my main monitor into a cool photo albub, but it also takes the second monitor offline. What I wantr is the screen savor only on the main monitor, and the second monitor to continue to show the webcam.
View 1 Replies View Relatedi have setup a touch screen on a windows 7 but the mouse is off i touch left it go's to the right
View 1 Replies View Relatedwhen i open a browser like internet explorer or windows live mail. The monitor screen blanks for a few seconds.I have an Nvidia Gforce 260, running windows 7pro. Amd dual core processor.The trouble started after updating my video and DivX drivers to play duke nukum.I think it may be a driver issue because it happened about a year ago as well but eventually stopped. I have changed resolution settings with no effect to the blanking screen.
View 1 Replies View RelatedI changed the screen resolution to 1280 x 720, but that was too big, then I changed it to 1024 x 768, but that was too small. Is there a way I change customize the screen resolution to somewhere in between?
View 4 Replies View Relatedmy computer screen is bigger than my monitor.
View 3 Replies View RelatedI have a white box tower with a ASUS P5KPL-CM Motherboard I turn it on and I get a black screen, no signal to the monitor,so I plugged in my old Sony tower and the monitor works. So it's not the monitor or the cable( switched them a few times by now) I believe it is the new tower. I think it might be the VGA card but know little about these things. Manual says it is a Intel Graphics Media Accelerator (Intel GMA 3100).Or could it be something else? By the way I have Windows XP if that makes a difference.
View 9 Replies View RelatedRecently I got rid of my Windows XP and installed Windows 7. In the beginning I didn't notice any discrepancies and I started filling my computer with useful programs. I was interrupted by a crash that basically makes the screen become dark blue with lines going diagonal. Also what was strange was that when I used button combos such as alt+F4 and ctrl+alt+del it changed color and I could hear background noise the same as when it is running normally. Therefore, to sum it up, my monitor display crashes randomly even upon startup or when I use some programs. As a result I tried the Windows 7 compatibility checker and everything seemed alright.
OS: Windows 7 32-bit
CPU:Intel(R) Core(TM) Duo 6300 1.86 GHz
RAM: 2 GB RAM
VIDEO: NVIDIA GeForce 7900 GS
I have a Toshiba Satellite C655-S5142 & Toshiba tells me the video card supports TV out. One article tells me all I need is a VGA to s-video adapter, but that doesn't work. (E-How) Another article tells me the jack on my computer must match the jack on my TV. (Windows.microsoft.com).
Too new to computers to know if this is needed to answer my question, but Windows 7 & Google Chrome.
Is what I'm attempting possible, or is it time to break down and get with the program with a HDTV ?