my new laptop's screen has a weird stain at the bottom, I can't get rid of it can you guys tell me what is it and how can I fix it myself? I still got the warranty but I don't want to send the laptop to repair because It's too much trouble there must be a way I can fix it myself so
Here's a picture of the stain I took 4 different pictures and put them together in 1 single picture.. (stain is in the middle)
My monitor seems to have alot of smudges and fingerprints on them you cant see it when its on. What should i use to clean it with? Can i use a microfiber cloth and some water and would that damage the display?
View 8 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedSince doing a "clean install" of Windows 7 I find that some pages are larger than the monitor. American Greetings......"Create and Print" in particular, no scroll bars, yet there is more to see. Also the background of the "desktop" appears larger than I am used to. Background is a slide show. Screen Resolution is set to the maximum (1366x768)(recommended). Asus P53E Notebook computer
View 5 Replies View RelatedI have 2 monitors set up,
Primary: Samsung Syncmaster 19 Inch widesreen 1400 * 900
Secondary: LG E2541 25 Inch Widescreen 1980 * 1080
OS: Windows 7 64bit
VideoCard: Nvidia Geforce 560 Ti
I use my primary mostly for browsing, msn, music players, Ventrilo etc etc,I want to use my secondary Monitor for gaming Watching Videos.However, when i want to use something Full screen on my secondary monitor it goes full screen on the primary monitor.
I cant also run it in windowed mode and stretch it out to full screen, it does not allow me to do that, it goes back to the size of my primary Monitor.
Ps.I want this since i play mostly with fullscreen borderless or in windowed mode so i can still browse the internet or adjust music/ventrillo settings. I dont want to have an Taskbar below the game, so thats why i need it on the Second Monitor.
i find that my windows and desktop are bigger than my screen
how do i sort out the problem?
i have a 19 wide screen 1440 x 940
my display screen does not fit my monitor and i dont know how to make it fit it is a 1920x1080 ASUS VS239H
View 6 Replies View RelatedI'm trying to fix my mom's Lenovo B570. I did a disk cleanup, defrag, and ran a full anti-malware scan. After cleaning off 122 malware items, I restarted the laptop for it to take affect. After entering her password, it's stuck on the welcome screen. Even my dad, who's been in IT for 30 years, can't help me. I've done a forced shut down, but that didn't work and I can't bring up the task manager.
View 4 Replies View RelatedI'm trying to install Windows 7 on my PC again, and came to a blank screen after the reboot. I have the PC hooked up to a TV using the S-Video output on my graphics card, and suspect that win 7 is using the DVI port instead. There is no way at the moment that I can use the DVI port because I don't have a monitor that supports it.
is there a way around this so I can use the S-video output for the rest of the installation?
I'm trying to install Windows 7 on a new SSD, my old hard drive crashed. My video card is an onboard ATI Radeon HD 4250. Initial setup works fine, but when the computer reboots it comes back up blank. I'm already running two monitors, one VGA and one DVI, and safe mode doesn't work either, I've tried booting from a flash drive and a dvd with exactly the same results.
View 9 Replies View RelatedSo i'm trying to do a clean install of windows 7 (x36) from XP that im currently running. i've burnt the iso down on a dvd and it boots fine and the installation runs normally. I'm getting through all the steps within the installation when it at last says something about that it's done and it's going to restart for the first use of windows 7. Now i'm getting my problem.
The computer starts up and goes through the memory testing and such but just as it's about to start windows 7 i'm getting a black screen and my monitor says "No signal - blabla" and 3 seconds later it restarts itself. If i don't do anything now my computer loops this restarting on and on...
So i've tried to install it with removing my two 512mb RAMS and only have two 1gb of the same brand. Didn't help.
I just did my first build and I am having a big problem with installing windows 7 on it. When I boot it's starts loading and then I get a black screen. I didn't get any options before or any command.
[code]...
my laptop got totally affected by different malwares,trojans..etc. So i used avira to scan my system and removed all the viruses it showed...but after rebooting a black desktop appeared with only cursor present and no icons n no wallpapers....cursor only moves no right-click..i did some searching on how to get my desktop screen back...n i tried Ctrl-Alt-Del..then new task n typing explorer.exe....an error mssg shows up saying u dont have permission..
View 2 Replies View RelatedAfter few seconds start screen disappears and is repalced by a Black/Blank screen with only mouse pointer. Mouser is working but there is nothing on screen to click on. Keyboard is working fine too. (checked with NumLock and Caps Lock keys)
Nothing happends beyond this point even after rebooting and repeating above process.
Searched internet for above problem symptoms. Looks like Windows 7 decides default monitor on its own. There is no way to decide it yourself duing installation.
My motherboard has two ports. 1 DVI and 1 analog. I have only 1 Analog monitor and do not plan on buying/having another monitor.
DVI to analog convertor is not available in market to test display from DVI port.
Could somebody please help?
I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
View 6 Replies View RelatedSo I had finally got my first build ever running a few hours ago. Was so excited. I used the program wintoflash to copy my windows installation cd to my flash drive. Popped the flash drive in my new rig and booted it up. It went to installation and took a bit of time to completely install. As it restarted after install the windows startup came up and was continuously going for quite some time and never stopped. So where I am at is that I cant get past the start up screen.
I have tried so much. I pulled out the second stick of ram, the gpu.. ran memory check with no errors, tried re installing windows in many ways (different partitions).I tried running in safe mode but it just gets stuck at disk. The only thing I knoticed is that windows 7 installs faster the second time around, even after deleting all the memory on the hard drive (advanced option during install). I have browsed the web and nothing has helped. Just got a new mobo after replacing the last defected one today, so that cannot be the problem. Completely and utterly frustrated to be presented with another speedbump after all this hard work to get it running.
My rig:
Intel i-5 3rd gen.
Kingston hyperx 2x8gb
AsRock b75m-dgs motherboard.
nvidia gt 440
Western Digital Caviar 250gb 7200.
Ive been running Win 7 Ultimate 64 for over a year with no problems. For Christmas I got a new HD because my old ones were full. I copied my files from my two old hard drives to the new one and then tried to do a clean install. After the installation when windows boots for the first time it works, but the picture has about two inches of black space all around and the resolution is at like 800x600. Im pretty sure the only thing i need to do to fix that is install and update my graphics drivers. The problem is after I start installing updates I have to restart windows. When it boots up for the second time all the black space is gone and the picture looks right but it always stops right after the black windows loading screen on the default background with no icons, only my curser. Ive tried to install windows again but the same thing happens. Ive tried safe mode and last known good config. Startup repair finds no problems at all. And when i restore with a system image the problem comes back as soon as I update something then restart.
View 4 Replies View RelatedSo, Im doing a clean windows 7 install. Here are the facts: [code] After the final stage of the setup where you enter PC name, set the password, enter time settings etc, the setup restarts the computer for the 'final' time, final indeed.What happens is that after the Bios / device scan, Windows won't boot and it won't continue past the black screen with the white blinking _ showing in the top left.Could this be because C: has been 'occupied' (or set as master partition) by the 1480GB partition and won't boot from the 105GB partition where Windows was installed?It's so weird because the first two reboots go without problem, no need to F8 and manually select the disk rather than the USB pen or anything.. But on the final reboot, nothing.
View 8 Replies View RelatedI had the clean it virus pop up window on my Sony Vaio laptop. After doing a few searches on how to get rid of this little pest. I rebooted my laptop in SAFE mode and did a restore to an earlier date. Everything seemed to take fine. Several minutes later while browsing the internet my FIREFOX crashed. I restarted it and several minutes later my computer crashed to a black screen with a blinking hash mark.
View 4 Replies View RelatedI did a custom/clean install of Windows 7 Ultimate 32-bit and now the screen is black. An external monitor works but I can't get the laptop lcd to come on.
View 1 Replies View RelatedI'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
Motherboard: MSI Z68A-G45
Nvidia GTX 580 (Latest 285.62 Drivers)
Windows 7 64 Bit
I've had this computer about 2 months and everything was working great until today. This problem started out of nowhere. I didn't mess around with drivers etc.
Anyway, when I switch on my computer, the bios screen loads up..followed by the Windows 7 loading splash screen. Then just when the welcome screen should appear, my monitor turns to standby and says that it's not receiving an input signal.
I booted in safe mode and removed the drivers. I restarted my PC and it worked and my desktop appeared. However when i install the drivers again and restart the computer as required by the driver installation..the same problem as above reappears.
My monitor is connected via a HDMI cable to the GTX 580.
EDIT: When I go to device manager and right click the GTX 580..there is an option to roll back drivers. I clicked this and it now shows as a VGA Adapter. I restarted and my computer booted up...but obviously in low resolution as no previous drivers were ever installed since i bought the PC with up to date drivers.
I also just installed 290.53 BETA drivers. Restarted and my computer now just hangs at the welcome screen. I can still boot in safe mode which is how i'm managing to write this.
I have a dual monitor setup, with a 1280x1024 VGA monitor coupled with a DVI 1920x1080 monitor. I use the 1920x1080 one as primary, because I like to play a few videogames and they're much better on the widescreen (and higher res).
However, I'd like to be able to display the windows 7 logon screen on the secondary (vga) monitor, it's just a minor bug but I'd like it that way because whenever I wake up my computer, the vga monitor wakes up almost instantly but the widescreen seems to take a few seconds to wake up, and I'd like to be able to input my password and start using my PC right away - I use an nvidia card if that means anything (maybe the ati drivers support it but not nvidia I don't know).
This am I booted my computer to; find everything was twice the size it usually is there by requiring me to scroll right to left and from up to down to read my home page.
View 4 Replies View RelatedMy screen saver will not come on and the monitor is not turning off, even though I've set it using the advanced power settings. Also, when I put the computer into Hibernate mode, it always turns itself back on, usually in the middle of the night.
View 3 Replies View RelatedOf course, it is easy to get a print screen of my primary monitor, but how do I get one on my secondary? Simply clicking on it's background doesn't work.
View 8 Replies View RelatedI have just installed a dual monitor set-up on my PC. 1 connected with DVI and the other with HDMI. While using both screens 1 has a yellow tint (the right screen) but when I switch back to using just the single monitor (left screen) then that screen has the yellow tint?
View 4 Replies View Relatedmy laptop has an ati x1600 mobility card and is outputting via hdmi (mini dvi-actually) to an ASUS VH242H (full 1080p) monitor. When I had this connected running xp I had not problem with the screen resolution and size, but now that I'm running windows 7 the 1920x1080 resolution is available, but the picture doesn't fill the whole screen, there is like a 1" black box around the displayed screen.
I believe it has something to do with my display driver, I'm currently using the one provided by windows update.
My problem is that if I connect the computer via DVI to a display it functions normally, but when I hook it up via HDMI to my Flat screen, it doesn't show the splash screen that gives you the option to enter bios. The screen just stays black until the windows welcome screen(win 7 64bit) comes up, then it acts totaly normal from that point. When I try to press the del key during the boot, I believe it is entering the bios, but the screen remains black so I can't see anything. I am guessing that the MB is not sending the signal to the Flat Screen until it loads windows, but can't find out anywhere that confirms that or what to do in order to resolve it.
View 1 Replies View RelatedI am running 2 monitors on my tv and second monitor in my living room. On the second monitor set up, which has a wenbcam set up through wineows explorer. The problem arises when my screen saver kicks in. It tuen my main monitor into a cool photo albub, but it also takes the second monitor offline. What I wantr is the screen savor only on the main monitor, and the second monitor to continue to show the webcam.
View 1 Replies View Relatedi have setup a touch screen on a windows 7 but the mouse is off i touch left it go's to the right
View 1 Replies View Related
