Could Not Find The Environment That Was Entered?
Aug 9, 2010I keep getting this error when trying to install and exe I have tried safe mode and system restore but can get no joy I get this error message when I try system restore.
View 9 Replies
ADVERTISEMENT
System Could Not Find Entered Environment Option
May 8, 2011I think I have some kind of malware. I am unable to use many functions on my computer, I always get the same error message "C:windowssystem32 strui.exe. The system could not find the environment option that was entered." I can't open system restore, because I get that same error message. I think its any .exe operations that I cannot use. My malware program won't open normally but when I tried it in safe mode, it didnt find any problems.
I also tried system restore in safe mode and from the boot screen, and it told me system protection was turned off, so I tried to turn it back on and the security tab that was needed to do this was missing. I don't have the windows 7 install disc because it was a factory install. I can't install any new programs and now I keep getting error messages saying I may have counterfeit software. In the bottom right corner of the desktop it says "Windows 7 Build 7600 This copy of Windows is not genuine".
"The System Could Not Find The Environment Option That Was Entered"
Sep 17, 2012The problem started while playing a game, causing a BSOD. After a restart, I noticed some of my programs just didn't boot up, for example Core Temp. I attempted to manually start Core Temp and received the following error: "The system could not find the environment option that was entered."That problem lead me here: The system could not find the environment option that was entered. - Microsoft Answers Which, obviously, did nothing for me. I tried to create a new user, but when I click the link in the control panel to do so, nothing happens. I then tried to repair my windows installation using my disc, and it said it could not find any problems. After searching some more, I found another solution would be to perform an upgrade to my Windows installation to fix the problems.
I put the disc in, nothing happened so I went to the setup.exe directly and got the same error as above. So I then booted in safe mode, and it loaded. I got excited until it said something like "an error prevented a compliance check from completing"And just to be very clear, my windows 7 is valid, I'd be more than happy to share an image of my newegg receipt or even my box to get that out of the way, as I've seen a lot of flaming towards people who have issues regarding validity. Well that brought me to a thread on this website where someone said to open an elevated command prompt and run sfc /scannow. I tried doing that and got this error: "This file does not have a program associated with it for performing this action. Please install a program, or, if one is already installed create an association in the default programs control panel."
Cannot Connect To Network Even With Key Entered
Apr 12, 2009Anyone have trouble connecting to a secured network? I setup WPA security on my network and can't connect even with the key entered. At the moment I can only connect via unsecured, cause I haven't figured how to manually change security type as in Vista. I'm using build 7068 x86.
View 1 Replies View RelatedSharing Requires A User Name Entered?
Sep 5, 2011On my Windows 7 PCs I must type a user name to access the shares it can be 1 letter or anything is there a way to remove that so access doesn't require any type of additional input?
View 3 Replies View RelatedEntered Wrong Password, Now Can't Map Network Drive
Dec 31, 2009I have set up a Windows 7 machine that shares out a hard drive as a network share along with printers to our network. On another computer I was mapping the network drive and accidentally entered the wrong credentials (wrong user name) and choose the remember credentials setting, and it would not let me map the drive.
I tried to go back in and remap the drive again but Windows is remembering the user name/password and I can't map it. I can map the drive from any other computer just fine. Does anyone know how to make Windows forget the credentials so I can map the drive?
Unknown 30 Second Boot Delay After Password Entered?
Oct 11, 2012Here's the issue:The boot time on the Dell box (XPS 430 Core 2 Quad - 8GB Ram - Radeon 4000x series) was virtually instantaneous from the time I hit enter on the password screen till I see the desktop.However, the new box...Intel Core i7-3770K 3.50 GHz 8MB Cache/Gigabyte GA-Z77X-UD5H Motherboard/VisionTek 900339 Radeon HD 6850 Video Card - 1024MB, GDDR5, PCI-Express 2.0/Seagate Barracuda 3.5" 1TB 7200 rpm 64 mb cache/16 GB Dual Channel DDR3 PNY SDRAM at 1067MHz/1333MHz...takes almost 33 seconds from the time I hit enter on the password till I see the desktop!Now here's what really doesn't compute. There is less data in the new install, and the page file is on another hdd, in additon to the 8 core processor with 16 GB of faster ram & an 80% free 1TB HDD.
I've been trying to all sorts of different approaches to try to resolve the 33 second problem:1. Event viewer per this TechRepublic video: TR Dojo: Diagnose slow Windows 7 boot with Event Viewer | TechRepublic (no processes or programsindicated)2. Clean booting per this page: How to perform a clean boot to troubleshoot a problem in Windows Vista or Windows 73. Bios default settings (not many changes anyways)4. Manually checking ALL entries in the Device Manager for driver updates5. Checking all manuf websites for new drivers or windows updates6. Defragging7. Avast full scans and MalwareBytes full scans (always clean) x 58. Blowing out old restore points 9. CCcleaner Registry scrubs10. sfc/verifyonly - no problems foundBut nothing seems to work. Given that a clean boot didn't resolve the issue, I have a feeling it might be a hardware timeout, but I have no idea if that's right, or how to trace it (the stuff I google is way above my head).
Dell OEM Disc Shows Blocked When Key Is Entered
Dec 5, 2012I searched the forums but couldn't find anything that directly dealt with my problems so if this has been answered i apologize.I just built my first build and used a Dell OEM windows 7 disc I bought brand new from Software Supply Group. Everything installed fine and works great until a few days ago im getting a message saying this copy of windows is not genuine build 7601. When i enter my product key it says it has been blocked. I know its not a pirated version what can i do. I tried activating it on the phone they also said it was counterfeit . What can i do ? My motherboard by the way is Asrock 970 Extreme 3.
View 19 Replies View RelatedConfiguring Windows 7 To Save Entered Passwords For Sites
Feb 15, 2012How do you configure windows so it does not constantly delete your passwords which you enter. It gets rather madning when you log into a site you use constantly and even though the "save" button is clicked you end up putting in the information the next time you boot up the computer. Also is there any way to turn off the security pop up box which always is asking do you want to view information from such and such site on sites you have logged into and use constantly.
View 3 Replies View RelatedCrash To Desktop When Playing BF2 (PkBstrB Service Entered Stopped)
Mar 21, 2012I've been trying to chase this issue for quite some time now. Randomly I experience a crash to desktop when playing Battlefield 2. Doesn't seem to have any rhyme or reason, just bam!
The only thing I can spot in the logs is one in system saying: (Happens Everytime) Quote: "The PnkBstrB service entered the stopped state." There is also one that will show in the app log saying: (Happens once in awhile) Quote: "Faulting application name: bf2.exe, version: 0.0.0.0, time stamp: 0x4a8d6629
Faulting module name: Memory.dll, version: 0.0.0.0, time stamp: 0x497ec791
Exception code: 0xc0000005
[Code].....
Cursor Randomly Jumps To Previously Entered Lines While Typing
Jun 7, 2011whenever i'm typing a text on this laptop (fujitsu siemens amilo li 1818) the cursor () changes it's position randomly i.e. to: .
it is very frustrating as i need to put the cursor back in it's original place again, due to the fact that it jumps to previously typed text. sometimes it goes back a few words, sometimes it jumps up a few lines. whenever it jumps back, it jumps in between words or randomly in words like you can see on the second image.
it happens alot (the more i type, the faster it occurs again). i am 100% sure that it's not caused by me touching the touchpad while typing, as i've been looking for 10 minutes now while typing and i can't spot myself touching the pad with my hand, finger or anything else. i tried covering the touchpad with random objects such as a sheet of paper or a creditcard but the problem still occurs.
it happens in any program (firefox, internet explorer, microsoft office, notepad,...), even when i'm watching a Internet-video browsing the comments it's scrolling the page up (never scrolls down).
Computer Is Not In A Domain Environment
Apr 25, 2012The computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem but after all of the windows updates, etc the error remains and appears every time the computer is rebooted..[code] The relevant status code says that the "Object already exists" which I think is far more relevant then some memory issue. Do I have to delete some file or registry entry? Or is it a security issue?
View 1 Replies View RelatedRunning A 4/6 Screen Environment
Dec 13, 2009Basically my question is, what's the best way of running a 4/6 screen windows 7 environment?
The detailed question is:-
I've just got a Dell XPS 8000 with a Nvidia GT 220 in it.
I'd like to run at least 4 19 inch screens. On my previous system (XP Pro 64 bit) I added a second PCI graphics card, which allowed me to run the 4 screens.
It's not for gaming, it's for developing, so I just need a lot of desktop real estate, more than 3D rendering power.
(Btw, I went for win 7 pro, due to the XP Pro Virtual machine, allowing me to run the 32bit cisco VPN client I need, in a 64 bit environment).
I installed the old PCI card I had a Nvidia GeForce FX 5200, but this seems to cause an issue with the GT220 card and the device manager reports it's stopped working (error code 43. I've googled it, seems a pretty generic error code, from what I can tell I think it's installing xddm drivers, which is the problem with wddm driver needed). I remove the card it BSOD's windows is unable to repair it, and I have to go back to a system restore point.
I see I have 2 spare PCIe x1 slots and a PCI slot on my motherboard.
Any suggestions?
Ideas I've toyed with are
1. Buy a PCIe x1 graphics card, possibly a quad card(but which one, nvidia or non nvidia)
2. Buy another PCI Graphics card,possibly a quad card( again which one? )
3. Can I spilt the HDMI and DVI outputs to give me 4 screens of 1280x1024. (or even 3 screens)
4. Scrap the GT 220, buy a PCI x16 card, then get another dual PCIe x1 card.(going to be very expensive I think).
Windows 7 Recovery Environment?
Dec 22, 2010how to get into recovery environment upon booting up .I'm facing a boot mbr problem when installing a new os on a hd on a removable hdisk drawer. i were told to write new boot procedure at recovery console prompt but i do not know how to get into recovery environment on bootup.
View 6 Replies View RelatedUsing Windows 7 In A Server Environment
Mar 18, 2011run Windows 7 Enterprise in a Server environment. Windows Server 2008 costs more than double, and both OS'es have their own IIS manager for deploying websites.
All the server roles available in Windows Server 2008 will probably not be used. So is there any downside in using Windows 7. Please be thorough in why or why not Windows 7 should be used.
External CD / DVD ROM Not Working In Windows 7 Environment?
Mar 20, 2011I own an MSI netbook with win7 op/sys and have recently purchased a Liteon external cd/dvd rom, but cannot get a dvd to play. Do i need specific drivers?
View 4 Replies View RelatedCreated Folder Only Showing Up In DOS Environment?
Sep 29, 2011I am attempting to write a batch file and I have run into several issues with the Windows 7 command interpreter. But this one has me completely baffled. In testing my batch file, I typed the command at the cmd line. This is my command:
Start /wait /b Robocopy "%USERPROFILE%My Documents" C:\% COMPUTERNAME% /S /E /M /COPYALL /ZB
When I run this command from the prompt it appears that it worked. But the created folder does not appear in the Windows 7 explorer environment. If I try to manually create this folder again, it tells me the folder already exists.If I do a dir of the root of C:, it shows the folder.... but ony in the DOS environment. Yes, I have changed the folder/file views and allowed system and hidden files to be shown.I have searched the other forums and I have seen nothing posted regarding this type of problem.
How To Play MP4 Files In Windows 7 Environment
Apr 8, 2010How can I play mp4's with Windows 7?
View 9 Replies View RelatedCan Change Windows 7 Environment Language
Jul 13, 2011i have a pc with win7 in german languae i want to change it to English?
View 1 Replies View RelatedError 2009: Not Enough Space For Environment
Feb 14, 2012i want to run a dos based programme named foxbase in windows 7.
View 2 Replies View RelatedMandatory Profiles For Windows 7 Environment
Mar 22, 2012When I try to copy default user profiles from a reference computer to the destination. Mandatory Profiles for windows environment.
View 1 Replies View RelatedMake A Distributed Environment In Visual Studio?
Jan 20, 2013How to make a distributed environment in visual studio using hadoop or any other tools? Is there any other IDE that supports C# language to form an distributed environment?
View 1 Replies View RelatedError - Windows Cannot Restart Into Recovery Environment
Aug 17, 2011When I use the backup utility in the control panel, and try to restore an image, at the point where I hit restart, I get the message - windows cannot restart into recovery environment.
Has anyone ever seen this message (it's the first time I've seen it).
64-bit Not Running Batch Files/Path Environment?
May 17, 2011I recently got a new laptop running Win 7 Pro 64-bit and as part of my initial third-party software installations I inadvertently overwrote the 'Path' environment variable (instead of appending to it). I subsequently tried adding c:windowssystem32; to it but don't know if this is doing anything. I have not managed to find any definitive information on what the Path ev should be on a new Windows 7 64-bit install.The thing is I loaded a batch process which I had on another Win 7 (32-bit) system but when I key the bat filename in cmd.exe (without the extension or double-click it) I get this error:"The syntax of the command is incorrect."If I key the bat filename with the extension, it runs but then stops because it seems not to recognize another program which the bat file calls even though I have the Path ev set for that program.
View 2 Replies View RelatedHow To Set Up Such A Dual Boot Environment Using Same Windows 7 License
Mar 14, 2011I've read the great tutorials for many dual boot options.Though I am missing one (at least I have not found it).I am seeking advice about installing 2 versions of Windows 7 possibly on one disk to boot from with the bootmanager.One version for productive use and the other version sort of as a sandbox to play and try apps and things.Is there a tutorial or advice how to set up such a dual boot environment using the same Windows 7 license?
View 2 Replies View RelatedChange Working Environment Language In Windows 7
Jul 13, 2011my win7 is in german so i want it be in english how i can change the win 7 environment language from German to English
View 2 Replies View RelatedWhat To Do When Computer Show User Environment Error
Mar 14, 2012The system could not find the environment option that was entered error
View 1 Replies View RelatedHow To Retrieve Windows 7 Path Environment Variable
May 23, 2012how to retrieve the user variable deleted in windows 7?
View 1 Replies View RelatedEnable The Usb Device Both Windows And VMware Workstation Environment?
Oct 4, 2012how to enable the usb device both windows and VMware workstation environment?i am used Linux in VMware as a same time also used windows in normal environment..i need to use my pen drive in both environment but i couldn't find USB in windows if it is running on linux and other-way round also happen.
View 2 Replies View RelatedChage Environment Variables For Documents And Settings Directory?
Jan 4, 2013I originally came to this idea after wondering "Could I install windows on a wireless external hard drive?"But quickly realized that a wireless hard drive probably would not be detected during bios, and needs windows to run.I'm wondering though, if the environment variables of windows could be modified, so that when you run software that uses these variables to store temp data etc, it would be sent to an identical network drive, instead of the directory windows is actually installed on.Can this be achieved with some changes to the registry?And would the changes cause any problems with windows itself?Basically I want to trick windows into thinking that the entire "documents and settings" folder, is on the wireless drive. Not C: (windows installed drive).
View 2 Replies View RelatedWindows 7 Startup Error Failure To Initial Environment (MFC)?
May 18, 2012When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
View 5 Replies View Related