Connecting A Latptop To A TV?
Jan 6, 2012
I have an HP laptop with Windows 7 on it and I just purchased a VGA cord in order to use my 50 inch Samsung Plasma TV as a monitor. (My main reason for doing this was to watch videos from HBO GO on it) I was able to get the hook up right and it does work; however, what is happening is that every once in a while, the picture on the TV screen disappears and it shifts back to my laptop screen. This lasts for about two or three seconds, then it shifts back to the TV screen. This does not appear to be happening at regular intervals; sometimes it happens ten times in a few minutes, sometimes it goes several minutes without happening.
View 3 Replies
ADVERTISEMENT
Aug 5, 2011
I have a office setup where two of the computers run on windows XP professional and the other two run on Windows 7 home edition. I want to connect all of them to a common printer through the port. Both the computers on win xp have been connected successfully but the other two on win 7 I am unable to connect, seems some patch is required.
View 2 Replies
View Related
Jul 30, 2011
I need to connect to a DNS Server over the internet. I have tried setting the DNS as the server IP but I really don't know what I'm doing when it comes to this. The server is running Server 2008.
View 1 Replies
View Related
Jun 29, 2012
I'm not sure if this is a Windows 7 problem or a Dell problem. My last 2 laptops were Gateway and I never had this issue, but I'm finding that A LOT of people are having this issue and no one seems to be able to help. I click on "find album info" to update my music library and the window pops up, but not much else. The little globe in the top left corner spins for a few seconds and my hourglass shows up until I move my cursor, but that's it. Just a blank white page.My browser of choice is Chrome, but I'm sure IE is default for this task.
1. I've made sure [URL] is listed in my trusted zone in internet options.
2. I've turned off wmp in "turn on or off features," rebooted and turned it back on again.
3. I've made sure in wmp I allow internet to replace missing info by going to organize - options - library
4. I never have "work offline" checked - ever - but I checked just to make sure.
5. I'm not 100% positive, but I'm sure my firewall settings are okay.
This has been driving me crazy for weeks. I really miss my Gateway that ran Vista because the player was a lot better and I miss the advance tag editor. And my last Gateway ran Windows 7 but I never ran into this problem. I'm wondering if this is a Dell problem. I just got this about a month ago and the 1st thing I tried to do was install Chrome because I abhor IE. But IE wouldn't let me download Chrome. Finally I found the .exe file on my last pc and was able to install that way. Could these issues be related? Maybe it's IE9.Also, some people get a script error when they click "update album info," but I (and a few others) just get a blank window.
Dell Inspiron
Model: M5040
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD E-450 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
[code]....
View 1 Replies
View Related
Nov 6, 2012
I have a Packard Bell EasyNote TJ71 laptop running windows 7. I use an HDMI cable to attatch to a flat screen TV and generally have no problem bringing up the second screen then changing over to the TV as the one screen when I watch a movie. I only need to do this as closing the lid on the portable switches it off.The problem I have is that I can not get the sound transferred to the TV,
View 2 Replies
View Related
Nov 14, 2012
I have a Dell Inspiron 1525 that I purchased in the USA, brought to the UK - had hard drive failure; which was replaced and then had Windows 7 OS installed (and now the laptop thinks it's a UK laptop too - ie: the @ symbol has moved - etc)... None of this has been a problem until recently when I moved back to the USA. I have a TV that I want to hook this laptop up to, so that we can view my video files on a bigger screen - but I've found that my laptop is displaying in PAL format - while the TV must have it in NTSC. I've been searching around and I cannot seem to find out where to change that over.... Should I put in an American DVD into the dvd player and switch regions?
View 6 Replies
View Related
May 16, 2011
When I connect my laptop to my LCD TV I can see windows 7 starting to load on the TV screen. As soon as Windows has installed the TV is not visible and windows can't detect it. Also some icons dissapear off my laptop screen.
View 1 Replies
View Related
May 18, 2011
I have purchase a switch to connect a laptop to a desktop computer, the first one having windows 7 (64 bits) and the second one having windows xp (sp 2 and 32 bits).have done the cables connection and nothing, absolutely nothing happens.The switch is OVISLINK EVO-FSH5C Fast Ethernet Switch
View 6 Replies
View Related
Apr 27, 2012
I have a Netgear Wireless Router WGR614-6VGUKS and a Netgear ADSL modem Router DG834 v4. Is it possible to connect to the Net wirelessly using these 2 and if so how? I have tried but with no success but not sure about order and connections. Looked on the Net but found info there confusing and not really answering my questions.
View 4 Replies
View Related
Jan 31, 2011
I have a hp 9810 us. Windows 7 os and Atheros AR5007 802.11b/g WiFi Adapter and a NVIDIA nForce Networking Controller/ I ran Combofix and when I boot up the computer The wi fi doesn't automaticly connect to the router. There is a switch on the front of the laptop with a indicator light red for off and blue for on. the switch is in the on position but I have to reset it in order for the computer to connect to the router.
View 14 Replies
View Related
Jul 15, 2012
I installed WINDOWS FIREWALL CONTROL on my Windows 7 system. I have Internet access with games but not with FIREFOX or MAIL WASHER PRO. I decided to not use WINDOWS FIREWALL CONTROL and deleted it from my computer (there was no uninstall entry). Now even though FIREFOX and MAILWASHER PRO is listed as being allowed by the Windows firewall I can not access the Internet. Should I use the system restore feature or am I missing something else. If I turn off the firewall I have access but of course that is not an option I want to go with
View 8 Replies
View Related
Jun 17, 2011
My tv has a DVI-D "hdtv" input, and my Dell latitude d620 has a vga output, so I bought a vga to DVI-D adapter, but either my computer or tv still won't pick up each other's signal, and thus I am still left unable to view my computer on my TV. The TV doesn't have a vga input, nor does it say "computer" anywhere, as the newer tvs do.
View 4 Replies
View Related
Sep 1, 2011
I have an AOC 936swa LCD monitor and want to try and run my PS3 through it. The input into the monitor is via D-Sub and USB. I made the schoolboy error of thinking it was a DVI and buying an HDMI to DVI cable...face-to-palm moment there!
Is there an HDMI to D-Sub cable? I can't imagine the USB will be able to carry it. The output from from the PS3 is bog standard.
View 2 Replies
View Related
Nov 13, 2009
I've had windows 7 for about two weeks now, and when i first installed it every thing was fine, WMC was working the way it was suppost to with my 360. But one day it just stop working when ever i try to connect it says "contacting" then after waiting minute's for it to start it says "Connection failure".i don't know what could have stopped it from working but its driving me crazy trying to find out what the problem is. i tryeduninstalling my xbox extender from WMC, and setting it up, again with a new Setup Key.(i did this many many times now.)Disconnecting my router and connecting my 360 directly to my laptop (wired)
View 6 Replies
View Related
Feb 15, 2011
I've read posts on this but I still can't get it to work. I did have my Windows 7 connected to my XP, but it didn't work with XP to 7 so I started fiddling with my XP and now I can't access my XP through 7.I don't know if this affects anything but my XP is connected through an ethernet cord because the wireless was unreliable, but my Win 7 is wireless.When I pull up network places on my XP, all I get is a broken link that says 'My Web Sites on MSN', but when I was looking for my 7 from XP, I found it under all MSN network places but it was under a browse box so when I closed out from the browse box, I didn't find it.
View 5 Replies
View Related
Mar 1, 2011
I have a Windows 7 workstation that people connect to remotely via LogMeIn.I recently decided to move it to my home LAN, because it has faster Internet than work LAN. My home LAN has many personal computers on it, with file and printer sharing enabled. Most of these shares are not password protected for convenience.So the problem is that this workstation is able to see and connect to personal computers. I do not want this. I've temporarily password protected as many shares as I could, but it's not a permanent solution because it's a big family, and there are many computers, and I probably missed some. Unfortunately I can't use that Windows 7 homegroup sharing feature because more than half of the computers are Linux or Macs or Windows XP.I've researched the ports used by Windows File sharing, and made an Access Control policy in my router to block IP and Port ranges specifically for this workstation, to try and prevent it from discovering my other computers, but it did not help. I suspect this network access policy only applies to IPs and Port ranges on the Internet, not on the LAN. (btw router is D-Link DGL-4300)I'm looking for some solution either by tweaking settings in the workstation to make it blind, or making some changes with the networking gear.
View 3 Replies
View Related
Jun 16, 2011
All my PCs and devices map drives to an XP machine with 12TB or storage. It's getting a bit dated and I have been looking at WHS 2011.
I will be testing to see if it will run the applications that XP does (Coldfusion, Firebird, OpenDNS updater etc). If they are OK I might be leaning towards actually moving towards WHS.
I have 6 x 2TB drives installed. I notice that every time WHS formats a drive it leaves 19mb free at the end. That's annoying but not a show stopper.
I would like to format the C: drive only then install WHS clean, leaving all of the other drives intact. Will that work? I dont have about 9TB free anywhere else to back up all that stuff, so a "suck it and see" approach might be rather disastrous.
I've also been looking around for some "lights-out" type software (Not manageengine central - it doesn't work, and has some major design flaws). Something that would download updates, and let me review them before approving them to be pushed out to the clients. I've been seaching to see if WHS supports that natively, but I guess either I can't find anything or it's not a feature of WHS...
View 8 Replies
View Related
Sep 20, 2011
my biggest problem isn't that I don't know how to do it. The problem is that, I've only seen it don on a ps2 SLIM, I always enjoyed the original ps2 so I never upgraded.
View 3 Replies
View Related
Mar 6, 2009
I have an Eee PC and my main Desktop, both are running Windows 7 (same build.)
I want to be able to use a Homegroup, I really like the idea of it, but I want to be able to access my Desktop PC like it was in the homegroup even though I'm on another network (such as school.)
Would creating a Virtual Private Networking (via Himachi) allow me to create a homegroup between the two computers?
Any suggestions?
View 3 Replies
View Related
Apr 29, 2011
I am having trouble getting video when connecting my PC to my LG LCD TV via HDMI.When I connect the two via HDMI, the television displays "no signal" however when I go into the Intel HD Graphics utility, it recognizes my TV and shows information about it.I find this strange because, previously I have been able to connect the two without any issues.SpecsASUS K52 NotebookCore i3 350MIntel HD Graphics320 GB HDD4 GB RAM
View 10 Replies
View Related
Apr 29, 2011
I have no internet connection on my HP Mini but I want to be able to transfer files to my HP Compaq PC via a USB connector is thus possible / practical?
View 1 Replies
View Related
Dec 17, 2011
I have one usb device & I want to connect it via lan?
View 1 Replies
View Related
Dec 20, 2011
VPN won't connect. It stopped while I was using it.
View 1 Replies
View Related
Jan 18, 2012
I recently finished building my new PC (happy to provide specs if needed) and I also bought a new panasonic gt30 HDTV. I trying to find a way to show my PC screen on the TV without having to use DVI cables just doing it wirelessly, I linked the TV to my network no problems as it has a wireless dongle included, this allows we to access the viera live crap.I was advised when buying my TV that if I have a PC with windows 7 and a second gen i7 2600k that I can just directly show my PC screen however I have no idea how to do this just wondering if anyone has done this before and any advice or guide they could provide. Basically I don't just want viera connect, I want the full PC access like you get when directly plugged in.
View 9 Replies
View Related
Jul 1, 2012
Wd HDD passport is not connecting with any system but hdd light is on when i connect with system
View 1 Replies
View Related
Sep 28, 2012
I have a 17R inspiron laptop and samsung laptop...hdmi connection worked before and now it doesnt.
View 8 Replies
View Related
Jan 20, 2013
If I connect my TV and run it at 1920x1080 (As it states it is capable of) I get odd placement of the screen, for example if I look at the desktop, icons are pushed over to half the screen, and it does this with a few resolutions. Unfortunately, my TV does not have a scaling feature so I am unable to properly tell it where the edge of the screen is. It seems in some games that run at the resolution, they do not do this. (For example, BF3. It shows everything within the boundaries) but my browser, desktop, and some other games fail to do so.
View 4 Replies
View Related
Jan 21, 2013
wasn't sure where to post this, but under win 7 seemed vaguely logical.yesterday, i thought i'd have a day with my pc connected up to my tv, a 37 inch samsung lcd. i connected via hdmi, thinking this would be a piece of cake.tried first to watch the football, streaming via sky go, but the audio was so bad, i disabled the hdmi audio, and plugged in a 3.5mm jack, but that did not work at all. reverted to the hdmi, but that was still awful. i just kept breaking up. so i killed the stream, and tried to p[lay some music from my music files, but again the audio was terrible, constantly brteaking up.
i don't know why, but i thought i'd try a game. so i fired up steam, opened up big picture mode, and sound was normal. i loaded portal 2. audio quality was excellent. no breaking up at all. so i closed steam, and tried Internet. audio was perfect.
closed the web browser, and tried my music files again. audio was again back to being terrible, breaking up. opened my browser again, loaded a Internet video, perfect sound. i paused the video that was playing, opened windows media player, played a music file and guess what ? perfect audio !!! but only while Internet page was open and video paused. when i closed the browser, the sound reverted to crappy breaking up sound. system details in case it matters are : intel core i7 3820, asrock extreme 4 mobo, gigabyte radeon hd 7950 windforce 3x, 8gb crucial ballistix ram, ocz vertex 4 128gb ssd, windows 7 pro 64 bit.
i've gone back to my little monitor for now, but occasionally i'll want to put this on my tv.
View 2 Replies
View Related
May 12, 2011
I have both a Macbook and a PC laptop. I use an Airport for my wireless network. I connected my HP 4000 to the Airport via cable. My Macbook finds the HP fine. My PC does not. The only time I can see the HP is when my Macbook is turned on and logged on. Once in awhile, I can even get the HP to print a test page when the Macbook is on, but that's about it. I want to be able to print directly to the HP without having to have the Macbook on also.
View 1 Replies
View Related
Mar 28, 2012
I am working with my Systems Administrator at my workplace to troubleshoot an issue we are having with new computers. Computers will connect to the internet through a browser, but clients that need access to a remote server (program updaters, installers, clients that require server access such as online games or itunes) cannot connect.Details: Until recently my company has only used workstations with XP-SP3 operating systems. We connect to the internet through a proxy server. Recently, we began upgrading our systems with Windows 7 Professional machines. At this time we have two. Email, web browsing and file downloads work without a problem. However, whenever a program tries to access an outside server it fails to connect. We don't believe the problem is related to any specific program but to the computer as a whole since the issue is consistent with several programs that need to access servers.One example is the malware program we use. It returns a connection error whenever it tries to update its definitions. Another example is online games (permitted at my company during off-hours). One, in particular, uses a seperate installer to download the game client. The installer cannot connect to the server and pops up a "no internet connection found" message. I have several other examples, each with a unique error message, but the basic issues seems to be the same. They cannot connect to their servers.
We believe this may be a proxy issue. One indication of this is when we tried to access iTunes. When iTunes tried to connect it popped of a proxy authentication box. We filled in the required information and gained access. However, whenever we tried to send any info to iTunes (such as signing in to the store) the authentication box popped up again and we had to re-enter our info.We have tried a multitude of solutions involving settings, firewall, anti-virus, etc. and so far have had no positive results. Also, this appears to be an issue with the individual machines and not the companies proxy settings in genera,l as the XP machines have no problems connecting to these servers using the same programs and they are on the same proxy.
View 3 Replies
View Related
Sep 20, 2011
I have a new Win 7 pro computer. I want to connect to this computer remotely, I had subscribed to gotomypc for years. It would not work and after trouble shooting with them it still would not work, So I tried logmein and it would not work either, in fact neither logmein or gotomypc could access my pc in a remote session.I have turned of firewalls remove antivirus software with no success. One thing I can do is connect to one of my vendors using a remote desktop application.
View 5 Replies
View Related
