I am having trouble getting video when connecting my PC to my LG LCD TV via HDMI.When I connect the two via HDMI, the television displays "no signal" however when I go into the Intel HD Graphics utility, it recognizes my TV and shows information about it.I find this strange because, previously I have been able to connect the two without any issues.SpecsASUS K52 NotebookCore i3 350MIntel HD Graphics320 GB HDD4 GB RAM
View 10 RepliesI have a 17R inspiron laptop and samsung laptop...hdmi connection worked before and now it doesnt.
View 8 Replies View Relatedif i connect my computer to my tv with a dvi to hdmi cable, will the sound from my computer come out through the speakers on my tv?
View 1 Replies View RelatedLately my girlfriend has been experiencing some flickering when connecting her laptop to my TV using a VGA cable or using HDMI. I know it's not the TV or the cables, since using my laptop (and others) worked fine.I updated her display drivers. She doesn't have a dedicated graphics card -- just one of those integrated ones -- but has never had a problem before. I'm not really sure what more to do for troubleshooting
View 1 Replies View RelatedI connected my HP Pavilion dv4-2165dx to my TV via the HDMI slot, and worked perfectly. I disconnected the cable from the notebook when I was done and still got the main LCD display to work. When I restarted the system, the LCD display was gone, just a blank screen with a backlight. The system is booting correctly, I can hear the windows7 startup sounds and even type my password in and access my account. So far I know that:
1. The screen hardware is not damaged, because after some reboots and taking the battery off for an hour I could get the input back with no problem (with windows complaining about being unable to boot and suggesting me to run Startup repair), but got a black screen again after rebooting again.
2. I can connect the HDMI again and get the output on the TV screen, but no main display is detected. If I toggle between displays with fn+f4, only the external HDMI-TV display works.
3. I get no startup screen either. That is, not even the first screen from where I can access the BIOS. But if I connect the HDMI-TV from the beginning I get all that info on the TV.
4. I reinstalled the Graphics driver from HP with no change.
My guess is that somewhat I messed up the default configuration and that the system is only recognizing the external displays as default displays. I haven't been able to modify this from the Control Panel - Display Settings menu, and I don't know where in the registry this default startup options could be.
I have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.What am I doing wrong or does to laptop has to be configured someway?
View 2 Replies View RelatedI have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.
View 3 Replies View RelatedI have an xfx radeon hd 6790. I am using the hdmi port and the display port for two tvs and I am using the vga (I think its called the vga) port it sez right on the box that it supports 3 monitors. I can switch between any two that I want but I cant get all three to work at the same time. I try to use all three at the same time I get "to extend the display another display must be disabled".
View 3 Replies View RelatedI have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies View RelatedI'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
I would like to connect my laptop to the television both have HDMI connections will a hdmi lead work
View 1 Replies View Relatedhow can i get sound from my computer to my tv
View 1 Replies View Relatedhe has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
View 1 Replies View Relatedmy blue ray only has one video out option -- (HDMI). My T.V. has 2 HDMI ports currently in use, and 1 unoccupied VGA (15-pin) connector port. What are my option(s) to connect if I want to use the VGA (15-pin). How do I know if the T.V. (3 year old 42" Sylvania) will accept using this port from the HDMI on my blue ray?
View 7 Replies View RelatedI am using a Laptop with a dead screen by running an external monitor from vga port. I am trying to duplicate this monitor on Sony HD tv using an USB adapter to HDMI. On the first go around I got my desktop ...minus any task bars or icons. on the Sony plus sound but could not get the complete desktop to display. (I am thinking now this might have been resolution trouble and my icons were just out sight) Videos play fine on vga monitor but see just windows logo on Sony.
When I go to display settings I see "1/2 multimonitors" and it shows the Sony as 3. That is when I get lost. If I click on identify it shows a giant " 1" and "2" on my vga monitor. at the same time. Then my choices are duplicate, extend, and show desktop. Which should I use.? I am not sure if my vga monitor is 1 or 2.
There is also a "connect to projector". I messed around there and killed the vga monitor (my only one) Had to restore in safe mode to get back to normal vga output.
Last night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v. Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought
im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen! Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)
I could figure this out on XP but windows 7 seems beyond me atm!
I can`t get surround sound over the HDMI. I have tried old drivers, and forworth to the newest. Nothing gives me surround. I have a Yamahasurround reciver that gives me the sound. And it works anything else I have tried on it. Inside windows, if I trie to go to sound options, goes to configuration on the HDMI inside sound opt. I can`t get anything else than stereo.
View 8 Replies View RelatedI recently purchased a Dell n5010 and i cant seem to connect it onto my 40" Bravia HD LCD.i'm trying to connect it via HDMI.. but somehow the laptop doesn't seem to display on my Bravia.At first i thought it was the cable issue, but the HDMI cable works perfectly fine on the DVD player.
View 2 Replies View RelatedI tried to hook up my hdmi cable from my computer to my lg hd tv, but i get no signal, i tried detecting the tv but nothing came up.
View 9 Replies View RelatedLook worse than the VGA out on my laptop? The HDMI out has black bars on the left, right, bottom and top. The VGA looks crisp and clear and fills the whole screen on my TV.
View 3 Replies View RelatedI need a slpitter for a PC input that will slpit to 2 tv's. Does any ane know of a good slpitter thats works. It can a Machanical or automatic?
View 4 Replies View RelatedWhen I connect my PC to my TV Via HDMI Cable, my TV does not receive a signal. When I check in Control panel>Display>Resolution, My TV hasn't even been detected. My TV is an LG 50", Card is a GTX580, and my OS is Windows 7.
Also, when I connect my laptop to my TV via HDMI (Also on Windows 7), It is instantly recognised and automatically displays, so it has to be an issue with the PC itself.
I am trying to get audio from my PC via HDMI into my Marantz NR1402 AV Amp and then into my panasonic plasma.the plasma is picking up the desktop (so the signal is going thru the amp ok but the amp is not receiving any sound. In the Nvidea Control panel Set up Digital Audio it recognises The marantz under HDMI but in the configure section "open windows sound setting" it only shows speakers (not plugged in) & Digital Audio (S/pdif) Default device (i am showing hidden & disconnected devices).I have opened the pc case and noticed that I have a two pin cable from the 9500gt going to the Spdif on motherboard & a cable running from the soundcard to the front sockets on the pc case.
View 2 Replies View RelatedRight i picked up a pc that needed some tlc, tried installing windows 8 and get the error so installed windows 7.Quick breakdown:motherboard - k7s41cpu - amd seprom 2400+graphics card - powercolor x1950 pro agp 256mbHad a few problems installing the video card - but after going into bios and changing agp to 4x instead of 8x it now works great - full hd display using a dvi - hdmi 1.4v leadNow my problem is I cant get any sound, having read and read i now know there is sound output through DVI (19 pins video / 5 pins sound)My question is how do i enable the sound through my x1950 proI have tried installing the realtek hd audio drivers but it just comes back no driver installed.
View 9 Replies View RelatedMy motherboard has two seperate sound capabilities. The normal sound outputs [Jacks in the back, headphone jack in the front] and sound over the HDMI.I use our 37 inch flatscreen as my second screen, and if I put a Blue Ray in, the software asks me if I want to use the regular sound, or the HDMI [and the sound comes out my TV]
View 3 Replies View RelatedI installed Windows 7 yesterday and at first I had no audio to my TV via the HDMI cable. I adjusted the settings via the sound icon on the taskbar, playback tab, changing whether the speakers or the Digital Output Device (HDMI), Sigmatel High Definition Audio Codec was the default. Eventually I got it to work.
Today, however it has stopped working again and no matter what changes I make, nothing works. When I right click on the playback device Digital Output Device (HDMI) and choose TEST, I get the message: Failed to play test tone. All sound comes through the laptop speakers.
I went to device manager and checked the driver for the codec and it was up to date.
When I was using Vista, to get the audio all I had to do was plug in the HDMI cable and the sound automatically went through the TV.
Does anyone have any ideas how to solve this?
My HDMI abilities are only enabled when my TV is powered off, which makes no sense at all. How can I get it to work?
View 3 Replies View RelatedHDMI on my gts 250 not active
View 1 Replies View RelatedHDMI on my gts 250 not active
View 1 Replies View Relatedhow can enable hdmi
View 2 Replies View RelatedMy All in one PC Asus ET2400XVT has a HDMI-input port but whenever i try to connect it through a HDMI-HDMI cable to my ps3, it does not sense the signal. What can i do?
View 3 Replies View Related