I have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.
View 3 RepliesI have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.What am I doing wrong or does to laptop has to be configured someway?
View 2 Replies View RelatedI have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies View RelatedI need to connect to the internet on my Acer Aspire 6920 Laptop. Internet is working fine on my desktop.
View 1 Replies View RelatedJust bought a new Nvidia GeForce 8400 GS graphics card to replace my dying onboard video.I have a Vizio HDMI TV however I am not getting sound through the HDMI cable. Was under the impression HDMI transmitted video as well as sound.Not sure if the problem is with the TV or with the Video Card?
View 14 Replies View RelatedI'd like to hook-up my computer to TV. I used an HDMI 30 foot cable from my computer to the TV and it didn't work. Cable is fine. How far can usually go? A$U$ CM#68-70-CA-3AA Desktop PC Intel Core i7 3770(3.40GHz) 16GB DDR3 2TB HDD, NVIDIA GeForce, GT630 2GB, Windows 7 Home Premium 64-Bit.I can only assume that there is not enough power in my GeForce630 to send data through to the TV at 30 feet.
View 9 Replies View RelatedSo I bought this kind of HDMI cabel I have a HDMI port on the backside of my case and my motherboard should support it.So one end going into the HDMI port on the case and the other one goes into the TV, but my computer is not recognizing it.I'm trying to dual screen, I have a normal PC monitor which is working fine, however the HDMI for the monitor looks like this and works just fine, what could the error be?
View 9 Replies View Relatedhow do i get sound from HDMI cable to TV
View 6 Replies View RelatedI have happily been viewing movies etc from my laptop to my TV via an HDMI cable for the last 2 years. However, I installed Windows 7 and at first I had no audio to my TV via the HDMI cable. I adjusted the settings via the sound icon on the taskbar, playback tab, changing whether the speakers or the Digital Output Device (HDMI), Sigmatel High Definition Audio Codec was the default. Eventually I got it to work.
Today, however it has stopped working again and no matter what changes I make, nothing works. When I right click on the playback device Digital Output Device (HDMI) and choose TEST, I get the message: Failed to play test tone. All sound comes through the laptop speakers.
I went to device manager and checked the driver for the codec and it was up to date. I downloaded all available updates from Windows and my laptops software updates and just now re-installed my sound and video drivers but to no avail.
When I was using Vista, to get the audio all I had to do was plug in the HDMI cable and the sound automatically went through the TV.
Does anyone have any ideas how to solve this?
I have a Windows 7 enterprise 64 bit pc and an Onkyo receiver. I used to have them linked with an aux cable for music. But since I had enough of the bad sound quality I bought an optical cable and connected it. Now I have the problem that my subwoofer gives a lot of less sound then with the aux cable with the exact same settings and music. Also my pc recognises the optical cable as an HDMI cable and I don't think this is right. I can't change any settings either in the sound.
Pc Wizard told me I have this onboard sound card: ASRock SB600 High Definition Audio Controller Pine Technology HD48x0 audio
i have Samsung LCD TV 40", and Windows Media Center done a Splendid jobs on TV!
but i don't want to use mouse & keyboard to control my PC all the time, i just want to use my TV Reomte to control my PC.
is there anyway i can do that?
I have an hdmi to dvi 6 ft cable; how do i use this cable to connect my gateway pc nv54 to my sony bravia tv??
View 1 Replies View RelatedI have aspire 7745 laptop running windows 7 premium 64bit. I had the video & sound working on the TV via the HDMI cable but it stoped working. Now the TV "sees" the HDMI signal (and receives a low tone) & the computer "sees" the TV as a secondary display in the device manager. but no signal or sound. i have tried many ideas found here and other places on line but no change.
View 1 Replies View RelatedI am having trouble getting video when connecting my PC to my LG LCD TV via HDMI.When I connect the two via HDMI, the television displays "no signal" however when I go into the Intel HD Graphics utility, it recognizes my TV and shows information about it.I find this strange because, previously I have been able to connect the two without any issues.SpecsASUS K52 NotebookCore i3 350MIntel HD Graphics320 GB HDD4 GB RAM
View 10 Replies View RelatedI have a 17R inspiron laptop and samsung laptop...hdmi connection worked before and now it doesnt.
View 8 Replies View RelatedI just bought a laptop and I was trying to connect it to my desktop by using LAN CABLE for data transfer.I have tried everything my way but it is not working I am Using Windows7 Ultimate edition for desktop and Windows 7 Premium for laptop Control PanelNetwork and InternetNetwork Connections -> Local Area Connection -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties
I set my computer's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I set my Laptop's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
What more I need to do to connect them?
I recently purchased an HP Omni 120; it doesn't have a VGA port but plenty of USB ports, and I found a TRENDnet USB/VGA KVM cable and I attempted to attach it to my computer an external monitor, but an error message popped up saying that it doesn't recognize the driver.
I learned that KVM is hooking up multiple computers with the same keyboard and mouse, but I wanted to know if I could use this cable for simply extending my display onto a second monitor without purchasing a KVM switch -- is there a driver or alternate method that would work? Or is there recommendations for a good, cheap USB/VGA cord?
I just bought a laptop and I was trying to connect it to my desktop by using LAN CABLE for data transfer.I have tried everything my way but it is not working .I am using Windows7 ultimate and Windows7 Premium OS.
Control PanelNetwork and InternetNetwork Connections -> Local Area Connection -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties
I set my computer's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I set my Laptop's ID to 192.168.1.3
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I just reinstalled Windows7 from recovery discs on my Dell desktop. Sorry, I don't know much about what hardware I am running, but windows7 is a fresh install and everything else works OK. When I plug the HDMI cable from the pc to the tv all I can see is the desktop background with no icons or desktop folders. I can't see any programs either. I do have sound though.
View 5 Replies View RelatedWhat's been going on with my HDMI port. 2 nights ago I was watching a movie through my Dell Inspiron N5050 laptop through my Panasonic HDTV. Yesterday, I tried to connect my HDMI cable to my laptop and computer, but nothing happened...So frantically I've been searching everywhere and trying what I have so far with no progress...
1.System Restore to earlier date when my HDMI port was working.
2.Toggle Computer/Duplicate/Extended/Projector Only and nothing worked(Also made sure tv was on the right HDMI input)
3.Tried 3 different HDMI cables and HDMI inputs
4.Uninstalled all sound drivers and Display Adapter(Intel(R) HD Graphics Family
5.Contacted Dell and had them try to reinstall drivers
6. Checked BIOS but I couldn't find any enable/disable feature for video.
7. Took battery out of laptop waited for 30 seconds pressed power button to reset.
My Panasonic TV doesn't even show up under my playback devices and when I try and do a dual screen through screen resolution it says another display not connected. I've tried going Intel HD Graphics Control Panel as well...no such Luck! Beginning to think that my HDMI port on my laptop is broken.
when i connect a rgb cable to my tv and laptop there is no sound
View 1 Replies View RelatedI have a HP Pavilion DV4-1030en. Specifications:
Intel Centrio 2 2,00GHz
4GB ram
nVidia 9200m GS
So, these are giving the main performance to my machine. I have also a nice Samsung D5000 TV (32" ) FullHD. When I connect my Laptop with a TV, computer start lag. It even doesn't use all of CPU (20-25%, while playing 720p video in TV with 10 fps (Fraps)). I've all latest drivers and everything should work. Using Windows 7.
The problem I am having is I have connected my pc to my samsung tv The image and sound are showing up on the tv, however, I am getting an error message on the tv saying NO SIGNAL.
View 6 Replies View RelatedThe problem I am having is I have connected my pc to my samsung tv... The image and sound are showing up on the tv, however, I am getting an error message on the tv saying NO SIGNAL.
View 9 Replies View Relatedif i connect my computer to my tv with a dvi to hdmi cable, will the sound from my computer come out through the speakers on my tv?
View 1 Replies View RelatedI accidentally reinstalled the wrong Operating System Recovery CD on my Acer Aspire 5534 laptop, and I want to return it back to factory settings. How do I do I restore it back to factory settings?
View 2 Replies View RelatedI accidentally reinstalled the wrong Operating System Recovery CD on my Acer Aspire 5534 laptop, and I want to return it back to factory settings. How do I do I restore it back to factory settings
View 1 Replies View RelatedI have just bought a new computer with windows 7 but when I switch it on it does not connect to my orange livebox. If I switch off the livebox at the mains leaving it for 30seconds before switching back on it connects with the computer after booting up. I leave the computer switched on during this manouvre. If I do a restart then it will connect up ok. If I switch off and turn on again it does not connect.
View 7 Replies View RelatedI'm a 3g dongle to connect to the net, I previously set up the ps3 to connect through same via the wired connection. That work fine for a bit, until I updated the firmware, Since then the PS can't seem to obtain an IP address and after setting a static IP it gives me a DNS error. On the flip side, my LAN is giving me a no internet access problem(ipv4) and also an unidentified network
I've changed the cable, released and renewed and reset the ipconfig and also flush DNS. I'm having the same problem with my laptop. Both were able to share the connection with the PS3 before.
(Pc runs windows 7 32 bit and laptop win 7 64bit)
I have an HP Pavilion Elite HPE machine, Windows 7, Radeon HD 5700 Series graphics card, connected to an Acer monitor and HDTV. Here's details on my setup:
My Equipment | Building a Home Theater With Your Office PC
My problem is that even though my HDMI cable's plugged into my Radeon graphics card, sometimes the PC only recognizes the Acer monitor and not the receiver (that's connected to the HDMI cable and my HDTV). So I end up having to plug and unplug the HDMI cable several times (sometimes 10+) before it recognizes the HDTV/receiver connection. Is there any setting that would favor the card/PC recognizing the HDMI cable more frequently? I've heard it's a handshake issue, and that maybe using a different type of cable would work. But wondering if there's a setting I could use before switching out cables.
I have an Acer Aspire laptop running Windows 7 Home Premium x64.
I regularly connect it to my TV monitor via HDMI cable and fall asleep watching movies (played on VLC or Windows Media Player). I set the computer to go to sleep after 1 hour.
Multimedia Settings are set to "Allow computer to sleep" under "When Sharing Media" in the Power Management section.
Screensaver is disabled. I have overrided my audio driver, since powercfg command suggested it may be a conflict.
If I am playing a movie without the HDMI cable plugged in, the computer goes into sleep mode right on schedule. It is only when I have the HDMI cable plugged into my TV monitor, that it refuses to enter sleep mode.