I'd like to hook-up my computer to TV. I used an HDMI 30 foot cable from my computer to the TV and it didn't work. Cable is fine. How far can usually go? A$U$ CM#68-70-CA-3AA Desktop PC Intel Core i7 3770(3.40GHz) 16GB DDR3 2TB HDD, NVIDIA GeForce, GT630 2GB, Windows 7 Home Premium 64-Bit.I can only assume that there is not enough power in my GeForce630 to send data through to the TV at 30 feet.
View 9 Replies
I have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
View 5 Replies View RelatedJust bought a new Nvidia GeForce 8400 GS graphics card to replace my dying onboard video.I have a Vizio HDMI TV however I am not getting sound through the HDMI cable. Was under the impression HDMI transmitted video as well as sound.Not sure if the problem is with the TV or with the Video Card?
View 14 Replies View RelatedSo I bought this kind of HDMI cabel I have a HDMI port on the backside of my case and my motherboard should support it.So one end going into the HDMI port on the case and the other one goes into the TV, but my computer is not recognizing it.I'm trying to dual screen, I have a normal PC monitor which is working fine, however the HDMI for the monitor looks like this and works just fine, what could the error be?
View 9 Replies View Relatedhow do i get sound from HDMI cable to TV
View 6 Replies View RelatedI have happily been viewing movies etc from my laptop to my TV via an HDMI cable for the last 2 years. However, I installed Windows 7 and at first I had no audio to my TV via the HDMI cable. I adjusted the settings via the sound icon on the taskbar, playback tab, changing whether the speakers or the Digital Output Device (HDMI), Sigmatel High Definition Audio Codec was the default. Eventually I got it to work.
Today, however it has stopped working again and no matter what changes I make, nothing works. When I right click on the playback device Digital Output Device (HDMI) and choose TEST, I get the message: Failed to play test tone. All sound comes through the laptop speakers.
I went to device manager and checked the driver for the codec and it was up to date. I downloaded all available updates from Windows and my laptops software updates and just now re-installed my sound and video drivers but to no avail.
When I was using Vista, to get the audio all I had to do was plug in the HDMI cable and the sound automatically went through the TV.
Does anyone have any ideas how to solve this?
I have a Windows 7 enterprise 64 bit pc and an Onkyo receiver. I used to have them linked with an aux cable for music. But since I had enough of the bad sound quality I bought an optical cable and connected it. Now I have the problem that my subwoofer gives a lot of less sound then with the aux cable with the exact same settings and music. Also my pc recognises the optical cable as an HDMI cable and I don't think this is right. I can't change any settings either in the sound.
Pc Wizard told me I have this onboard sound card: ASRock SB600 High Definition Audio Controller Pine Technology HD48x0 audio
i have Samsung LCD TV 40", and Windows Media Center done a Splendid jobs on TV!
but i don't want to use mouse & keyboard to control my PC all the time, i just want to use my TV Reomte to control my PC.
is there anyway i can do that?
I have an hdmi to dvi 6 ft cable; how do i use this cable to connect my gateway pc nv54 to my sony bravia tv??
View 1 Replies View RelatedI have aspire 7745 laptop running windows 7 premium 64bit. I had the video & sound working on the TV via the HDMI cable but it stoped working. Now the TV "sees" the HDMI signal (and receives a low tone) & the computer "sees" the TV as a secondary display in the device manager. but no signal or sound. i have tried many ideas found here and other places on line but no change.
View 1 Replies View RelatedI just reinstalled Windows7 from recovery discs on my Dell desktop. Sorry, I don't know much about what hardware I am running, but windows7 is a fresh install and everything else works OK. When I plug the HDMI cable from the pc to the tv all I can see is the desktop background with no icons or desktop folders. I can't see any programs either. I do have sound though.
View 5 Replies View RelatedWhat's been going on with my HDMI port. 2 nights ago I was watching a movie through my Dell Inspiron N5050 laptop through my Panasonic HDTV. Yesterday, I tried to connect my HDMI cable to my laptop and computer, but nothing happened...So frantically I've been searching everywhere and trying what I have so far with no progress...
1.System Restore to earlier date when my HDMI port was working.
2.Toggle Computer/Duplicate/Extended/Projector Only and nothing worked(Also made sure tv was on the right HDMI input)
3.Tried 3 different HDMI cables and HDMI inputs
4.Uninstalled all sound drivers and Display Adapter(Intel(R) HD Graphics Family
5.Contacted Dell and had them try to reinstall drivers
6. Checked BIOS but I couldn't find any enable/disable feature for video.
7. Took battery out of laptop waited for 30 seconds pressed power button to reset.
My Panasonic TV doesn't even show up under my playback devices and when I try and do a dual screen through screen resolution it says another display not connected. I've tried going Intel HD Graphics Control Panel as well...no such Luck! Beginning to think that my HDMI port on my laptop is broken.
when i connect a rgb cable to my tv and laptop there is no sound
View 1 Replies View RelatedI have a HP Pavilion DV4-1030en. Specifications:
Intel Centrio 2 2,00GHz
4GB ram
nVidia 9200m GS
So, these are giving the main performance to my machine. I have also a nice Samsung D5000 TV (32" ) FullHD. When I connect my Laptop with a TV, computer start lag. It even doesn't use all of CPU (20-25%, while playing 720p video in TV with 10 fps (Fraps)). I've all latest drivers and everything should work. Using Windows 7.
The problem I am having is I have connected my pc to my samsung tv The image and sound are showing up on the tv, however, I am getting an error message on the tv saying NO SIGNAL.
View 6 Replies View RelatedThe problem I am having is I have connected my pc to my samsung tv... The image and sound are showing up on the tv, however, I am getting an error message on the tv saying NO SIGNAL.
View 9 Replies View RelatedI have an HP Pavilion Elite HPE machine, Windows 7, Radeon HD 5700 Series graphics card, connected to an Acer monitor and HDTV. Here's details on my setup:
My Equipment | Building a Home Theater With Your Office PC
My problem is that even though my HDMI cable's plugged into my Radeon graphics card, sometimes the PC only recognizes the Acer monitor and not the receiver (that's connected to the HDMI cable and my HDTV). So I end up having to plug and unplug the HDMI cable several times (sometimes 10+) before it recognizes the HDTV/receiver connection. Is there any setting that would favor the card/PC recognizing the HDMI cable more frequently? I've heard it's a handshake issue, and that maybe using a different type of cable would work. But wondering if there's a setting I could use before switching out cables.
I have an Acer Aspire laptop running Windows 7 Home Premium x64.
I regularly connect it to my TV monitor via HDMI cable and fall asleep watching movies (played on VLC or Windows Media Player). I set the computer to go to sleep after 1 hour.
Multimedia Settings are set to "Allow computer to sleep" under "When Sharing Media" in the Power Management section.
Screensaver is disabled. I have overrided my audio driver, since powercfg command suggested it may be a conflict.
If I am playing a movie without the HDMI cable plugged in, the computer goes into sleep mode right on schedule. It is only when I have the HDMI cable plugged into my TV monitor, that it refuses to enter sleep mode.
I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!
View 2 Replies View RelatedI have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.What am I doing wrong or does to laptop has to be configured someway?
View 2 Replies View RelatedI have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.
View 3 Replies View Relatedwhen I plug my HMDI cable into my TV from my PC I lose my PV monitor signal
View 1 Replies View RelatedI connect my laptop to my Sanyo tv and keep getting no signal what should i do?
View 1 Replies View RelatedWhen I connect my HDMI cable to my laptop and the TV my PC screen goes black. When i take out the cable it becomes OK
View 2 Replies View RelatedMy lapotop is HP Pavilion 9750 running Windows 7 Enterprise (with the latest updates). When I'm inserting the HDMI cable to view my screen on the TV it automatically shows the video, but I have to manually change the default playback from "Speakers" (Realtek High Definition Audio) to "Realtek Digital Output" (Realtek High Definition Audio) so I could hear the audio from my TV and not from the computer.
Is there a way to make that switch automatically when I connect/disconnect the HDMI cable?
I just bought a laptop and I was trying to connect it to my desktop by using LAN CABLE for data transfer.I have tried everything my way but it is not working I am Using Windows7 Ultimate edition for desktop and Windows 7 Premium for laptop Control PanelNetwork and InternetNetwork Connections -> Local Area Connection -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties
I set my computer's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I set my Laptop's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
What more I need to do to connect them?
I just bought a laptop and I was trying to connect it to my desktop by using LAN CABLE for data transfer.I have tried everything my way but it is not working .I am using Windows7 ultimate and Windows7 Premium OS.
Control PanelNetwork and InternetNetwork Connections -> Local Area Connection -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties
I set my computer's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I set my Laptop's ID to 192.168.1.3
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
When I had Vista 64 bit before I upgraded to Windows 7 home prof., I could see what was on my monitor for the computer so I could watch a movie and just turn the speakers closer. Now after much experimentation, it will only show the background, no icons movies etc. on vga or the hdmi connection I just connected to my tv and the back of the computer!how to get me desktop's exact display over to my tv as well.
Amd Phenon -X$
Gateway DX-4300
ATI Radeon HD 4600 Series-Samsung.
I have a laptop and desktop both running win7, both connected via wifi to the same router which is two floors down. I would like to access the laptop from desktop via remote desktop. It works fine but is a bit slow. My question is: Can I connect the laptop and desktop via a crossover cable to speed up the remote desktop connection between the two computers?I suspect plugging one or both computers directly into the router may help but I would really like to keep the two computers in the same room.The purpose of connecting remote desktop between the two computers is NOT for sharing the internet connection or even for file sharing; it is simply because the laptop computer has some applications on it that the desktop computer does not.
View 3 Replies View RelatedCan I connect a data cable from a laptop to desktop with more memory and transfer information from laptop to desktop.
View 1 Replies View Relatedsplitting audio to two separate output devices in windows 7 x64.I'm preparing my primary PC to act as a Media center. Ideally I'd like for someone to be able to watch netflix, or online videos on the TV with audio and video running through the HDMI cable while someone else can use the PC monitor & desktop speakers to game or do other tasks. The issue is both gaming applications and chrome (or other web browsers) only support audio playing through the default audio device in windows 7. As a result, i'm forced to pick whether i want all audio to play from the TV speakers or the desktop speakers.
Summary of Specs:
Asus M2N-Sli Deluxe mobo - rear port used for desktop speakers
Radeon HD 6870 - HDMI for TV sound
Athlon 64 x2 6000+
4 gigs ram
Doing some research I've learned this was a feature in win XP but was dropped in vista/7. On windows 7 support forums the Microsoft Support reply that it was an intentional omission win both windows 7 and vista.I know how to direct the audio from winamp, media player classic, and WMP to the output device of my choosing.I have tried three third party applications:Virtual Audio Cable: lets me play the same audio out both the HDMI connection and the desktop speakers.IndieVolume: shows promise as it lets me direct audio from applications to the output device i choose, but all attempts to get the software to change my web browser's output device haven't worked. I also think the software is not supported for windows 7 x64.J River - Media Center 17: media center software with an embedded web browser. Using this media center i can direct the audio from any media on my computer to the audio device of my choosing, but the embedded web browser plays out of windows default output device not the audio device i choose.
