Connecting A Second Monitor Using A TRENDnet USB/VGA KVM Cable
Jul 26, 2012
I recently purchased an HP Omni 120; it doesn't have a VGA port but plenty of USB ports, and I found a TRENDnet USB/VGA KVM cable and I attempted to attach it to my computer an external monitor, but an error message popped up saying that it doesn't recognize the driver.
I learned that KVM is hooking up multiple computers with the same keyboard and mouse, but I wanted to know if I could use this cable for simply extending my display onto a second monitor without purchasing a KVM switch -- is there a driver or alternate method that would work? Or is there recommendations for a good, cheap USB/VGA cord?
View 2 Replies
ADVERTISEMENT
May 1, 2012
I just bought a laptop and I was trying to connect it to my desktop by using LAN CABLE for data transfer.I have tried everything my way but it is not working I am Using Windows7 Ultimate edition for desktop and Windows 7 Premium for laptop Control PanelNetwork and InternetNetwork Connections -> Local Area Connection -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties
I set my computer's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I set my Laptop's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
What more I need to do to connect them?
View 4 Replies
View Related
May 1, 2012
I just bought a laptop and I was trying to connect it to my desktop by using LAN CABLE for data transfer.I have tried everything my way but it is not working .I am using Windows7 ultimate and Windows7 Premium OS.
Control PanelNetwork and InternetNetwork Connections -> Local Area Connection -> Properties -> Internet Protocol Version 4 (TCP/IPv4) -> Properties
I set my computer's ID to 192.168.1.2
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
I set my Laptop's ID to 192.168.1.3
Subnet Mask : 255.255.255.0
GateWay : 192.268.1.1
View 7 Replies
View Related
Oct 5, 2010
I have just bought a new computer with windows 7 but when I switch it on it does not connect to my orange livebox. If I switch off the livebox at the mains leaving it for 30seconds before switching back on it connects with the computer after booting up. I leave the computer switched on during this manouvre. If I do a restart then it will connect up ok. If I switch off and turn on again it does not connect.
View 7 Replies
View Related
Jul 19, 2012
I'm a 3g dongle to connect to the net, I previously set up the ps3 to connect through same via the wired connection. That work fine for a bit, until I updated the firmware, Since then the PS can't seem to obtain an IP address and after setting a static IP it gives me a DNS error. On the flip side, my LAN is giving me a no internet access problem(ipv4) and also an unidentified network
I've changed the cable, released and renewed and reset the ipconfig and also flush DNS. I'm having the same problem with my laptop. Both were able to share the connection with the PS3 before.
(Pc runs windows 7 32 bit and laptop win 7 64bit)
View 2 Replies
View Related
Jun 17, 2012
Last day my desktop crashed with blue screen error while trying to connect my mobile internet Via data cable. Blue screen error I got:
DRIVER_POWER_STATE_FAILURE
STOP : 0x0000009F(0X00000003,0X829FEC08,0X83562AE0,0XBA430F20)
And the DUMP FILE I got: 061712-19640-01.dmp
View 2 Replies
View Related
Mar 21, 2011
I have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.What am I doing wrong or does to laptop has to be configured someway?
View 2 Replies
View Related
Mar 21, 2011
I have the Acer Aspire 5741Z and it has HDMI connection on the side. I plugged in the cord to the laptop and then to the TV. Sometimes (depending on the model of the TV) when I set the menu to HDMI the TV will search for the connection and signal and connnect automatically. Then with other TV's is doesn't.
View 3 Replies
View Related
Dec 30, 2009
New PC and new LG 21" Monitor.
Regarding the PC to Flat panel monitor cable used: the digital type (not VGA):
I guess it's called a DVD I to DVD I (male/male)
Is it the "Dual Link" type that I need ? (guess I don't know what is meant by dual-link).
View 2 Replies
View Related
May 23, 2011
I have recently bought a new computer and with it i got a lcd monitor. As i alreadfy had a computer i thought i would start using a dual monitor set up in which i can have two screens doing different things, for instance one monitor plays a film while the other is on facebook. how ever when i received the computer it only had one AV monitor port on it. This meant i couldnt do a dual set up for even use the LCD monitor to its potential. So i bought a AV splitter cable to plug both my monitors into one port. but this just left me with two monitors doing the same thing and having to use the bad resolution from the old monitor on both monitors.
View 6 Replies
View Related
May 16, 2011
When I connect my laptop to my LCD TV I can see windows 7 starting to load on the TV screen. As soon as Windows has installed the TV is not visible and windows can't detect it. Also some icons dissapear off my laptop screen.
View 1 Replies
View Related
Sep 1, 2011
I have an AOC 936swa LCD monitor and want to try and run my PS3 through it. The input into the monitor is via D-Sub and USB. I made the schoolboy error of thinking it was a DVI and buying an HDMI to DVI cable...face-to-palm moment there!
Is there an HDMI to D-Sub cable? I can't imagine the USB will be able to carry it. The output from from the PS3 is bog standard.
View 2 Replies
View Related
Jun 15, 2012
I would very much like to connect a Laptop to a 19inch Monitor using a 10 metre VGA and 10 metre USB cables. Is this possible, without being detrimental??
View 5 Replies
View Related
Jul 22, 2011
The card didn't come with a dvi vga adapter and do i need one to use the graphics card with the monitor?
View 4 Replies
View Related
Oct 23, 2011
when I plug my HMDI cable into my TV from my PC I lose my PV monitor signal
View 1 Replies
View Related
Jul 2, 2012
My sound card Xonar D1 doesn't work properly and i wrote to ASUS and they told me to connect the "HD audio" or "speaker" cables from the front panel of motherboard to the sound card's front panel. Is that safe to do? weather it will work or not, is it safe to try?
View 2 Replies
View Related
Aug 13, 2009
ESS v4 is asking permission if i should allow Resource monitor to connect to a remote computer, is this like MS gathering system performance information ?
View 3 Replies
View Related
Jan 2, 2012
I just installed my ATI Radeon X1950 XT sapphire graphics card to my computer. I inserted it into the slot and plugged it in. Now when I turn on my computer the monitor keeps getting the Check Signal Cable error. I have it plugged in properly and everything not sure what is going on.
My computer is a HP Pavilion a1740n.
View 9 Replies
View Related
Oct 16, 2012
I have an Acer Aspire S3 laptop with no ethernet port and no CD drive, but the room I have just moved into has no wireless connection, only a broadband cable. I have been looking for an adapter so that I can connect the cable to the USB port and get to the internet through that, but it seems lots of them aren't compatible with Windows 7 (64 bit). This one TRENDnet | Products | USB 1.0 / 1.1 / 2.0 Devices | TU2-ET100 from Trendnet claims to be, but it looks like the driver is installed from a CD... which is no good for me because I have no CD drive! The drivers can be downloaded from the trendnet website, is this all I need to install the device? I really don't want to waste any more money or time!
View 3 Replies
View Related
Mar 5, 2012
I recently bought a new setup, and the network card of choice was the TEW-423pi C1.1R card from TrendNet. The first time I set it up with my PC, the driver installed wonderfully and I had no problems.But until recently, Windows 7 64bit must have updated the driver or something, because now this thing doesn't connect to my home network. The only network it will connect to is my phone's Ad-hoc network.I have tried any and all drivers on the web, including the ones TrendNet has to offer. And anytime I try to update it with Windows Update, it just tells me the best driver is already installed.
View 3 Replies
View Related
Aug 18, 2009
I have Windows 7 Pro (RTM) installed on a DELL Precision M65 laptop.
My LAN interface reports "Cable unplugged" although the cable is inserted and working.
I have no network connection through this interface.
the onboard NIC is a Broadcom NetXtreme 57xx Gigabit adapter and the driver reports it is working correctly.
If i try to install the latest driver from Broadcom, Windows says I already have the latest driver installed!
Any Suggestions?
View 4 Replies
View Related
Apr 30, 2012
I have a new gaming computer with a high end video card and plenty of RAM and a high speed cable Internet connection. I also have a HDHomeRun TV cable unit which is listed to work with MS Media Center. When I set up my Media Center/TV connection it recognizes my HDHomeRun TV connection and all three TV channels via my MCard I got from Comcast cable. But next to the last dialog window, during setting up my TV connection, I got the following message, "Your computer is not digital cable ready. You will not be able to set it up for use with a cable card."
View 4 Replies
View Related
Jan 20, 2013
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies
View Related
Jul 16, 2010
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies
View Related
Aug 14, 2012
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
View 2 Replies
View Related
Jan 6, 2010
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
View 3 Replies
View Related
Jul 4, 2011
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies
View Related
Oct 21, 2010
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
View 2 Replies
View Related
Feb 3, 2011
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
View 4 Replies
View Related
Sep 27, 2011
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies
View Related
Nov 17, 2011
So I've been getting these annoying BSOD's only after I'm off WiFi and when I'm using my LAN Cat.5e cable..
Technical Info:
STOP: 0x000000D1
nvm62x64.sys
Windows 7 . . .
- x64
- full retail version
- age is about 2 yrs
- age of OS is also about 2 yrs
View 9 Replies
View Related
