Connecting HP 4000 Through Airport To PC?

May 12, 2011

I have both a Macbook and a PC laptop. I use an Airport for my wireless network. I connected my HP 4000 to the Airport via cable. My Macbook finds the HP fine. My PC does not. The only time I can see the HP is when my Macbook is turned on and logged on. Once in awhile, I can even get the HP to print a test page when the Macbook is on, but that's about it. I want to be able to print directly to the HP without having to have the Macbook on also.

View 1 Replies


ADVERTISEMENT

Network Windows 7 64-bit With Apple Airport Express?

Jul 5, 2011

using an Apple Airport Express device on my existing wireless network? I've combed the web, tried several things and zero luck.

One thing I did learn is that the apple device seems to want WEP2 type security, but that totally knocks out my wireless connection from my pc to the network. I changed it to WEP and got my computer connected again but either way I could not use, access or "see" the apple device.

View 3 Replies View Related

Get A CPU With HD 4000?

Dec 12, 2011

My current setup has a Pentium G620 (HD Graphics 1000), which runs fairly well except for a few major drawbacks:

When I want to watch Blu-Ray movies, PowerDVD's interface has some really annoying stuttering. skipping ahead or ff/rw also is somewhat unstable If I want to convert a movie, it takes well over 6 hours to do so.

(see disclosure) Watching .mkv's on my XBOX via WMC is slightly unstable, as it'll lock up if I try to fast forward or rewind 1080p videos (I don't know exactly how this works, but I'm pretty sure the computer converts the .mkv to an XBOX-compatible format before streaming to the XBOX)

SO basically I'd like to upgrade. If I had known beforehand that the Pentium wouldn't be up to snuff enough I'd had gone for the i3-2105 (or 2125 if I can find it), Since it has HD 2000 and Quick Sync (which I think would solve my problems). But since I'm upgrading, I'd want something superior enough to make it worthwhile. That's also why I'm waiting for Ivy Bridge, even though it's fairly similar to SB.

I don't think the details for the IB graphics are finalized, but I think I read that the 2500 was supposed to be the 2000 but with DX 11, OCL 1.1, and one or two more channels. But the 4000 is supposed to be a lot more powerful, and might futureproof me a bit if I decided to go into gaming.

View 9 Replies View Related

Logitech QuickCam 4000 Drivers

Jul 5, 2009

I have downloaded the Windows 7 Release Candidate and I enjoy it. However, I cannot seem to find Logitech QuickCam 4000 drivers that are compatible. Can anyone help me?

View 3 Replies View Related

NVidia GeForce4 MX 4000 Drivers?

May 22, 2012

I was with the drivers from nVidia GeForce 4 MX 4000 on my Windows 7, but yesterday I inadvertently uninstalled with ccleaner, and am now looking at, I tried installing several times did not?

View 4 Replies View Related

Dual Monitors With Old Geforce4 Mx 4000

Nov 16, 2009

Odd situation. I have two video cards a geforce4 MX 4000 and built in Intel Q965/Q963 installed in a HP dc5700 with 1GB of RAM running Windows 7 Enterprise fresh install. The onboard Intell has the latest drivers from HP and the nVidia I got working using the 81.98 forceware driver.

If I select the nvidia card as the main video card in the BIOS the display will show up on just one monitor (the one plugged in to the card), if I look in the device manager it sees both cards w/o errors yet I have no option for dual display, if I click on "detect" it finds nothing. Also all the nvidia software runs fine.

However if I select the onboard card as the default then the display goes on just it's monitor but this time in device manager the nvidia card has the "windows has stopped this device because it has reported problems (code 43)" message and obviouly no option for dual monitors.

It would seem both drivers and monitors are working since they work independantly, it's just that Windows7 doesn't seem to want them to play together. Also this situation worked fine when pc was WinXP.

View 1 Replies View Related

Drivers For Laserjet 4000 For Windows 7?

Aug 27, 2012

New work computer. Networked thru peer network, all computer had win xp....Hp didn't offer and drivers for this printer on Win 7, not even a generic...

View 2 Replies View Related

Downloading Drivers For HP LaserJet 4000 TN With XP?

Dec 4, 2012

i need the driver Downloading drivers for HP LaserJet 4000 TN with XP

View 1 Replies View Related

Hp Laserjet 4000 Windows 7 Driver

Dec 27, 2012

Where can I download the drivers for a HP Laserjet 4000 Printer?

View 1 Replies View Related

Nvidia Geforce 4000 Mx Driver Problem

Dec 24, 2009

i have nvidia geforce4 mx gaphics card i need driver for windows seven .

i cant play movies on my computer .

View 1 Replies View Related

Microsoft Ergonomic Keyboard 4000 With Windows 7-64 Bit?

Dec 19, 2009

is anyone using the wired USB version of the Microsoft Ergonomic keyboard 4000 with Windows 7 - 64 bit? I've downloaded the latest software/drivers for this and installed them but I still can't get the Shortcut/My Favorites keys to function correctly.These used to work fine with XP now no matter whcih of the 5 keys I press it opens the same program ( CoreFTP )I have each of them set up to open specific webpages but they don't.

View 9 Replies View Related

Wireless Not Working On HP Pavilion Dv7t-4000 CTO

Aug 8, 2012

I have to hardwire my connection to type this. I installed all the graphics/wireless/fingerprint drivers but I still cannot access wireless internet. I don't know what's going on. I just reformatted the PC a couple hours ago. (not factory reset, windows 7 ultimate upgrade)

View 1 Replies View Related

Windows 7 Driver For The Nikon Coolscan 4000?

Jun 23, 2011

Is there a Windows 7 driver for the Nikon Coolscan 4000?

View 2 Replies View Related

Downloading Drivers For HP LaserJet 4000 TN With Windows 7

Feb 24, 2012

Downloading drivers for HP LaserJet 4000 TN with windows 7

View 1 Replies View Related

How To Install Pes 2013 On A Pc With Intel Hd Graphics 4000

Jan 26, 2013

install pes 2013 on my Toshiba satellite p875-s3710,specs;8gb of ram,core i7 processor,intel hd graphics 4000

View 1 Replies View Related

Downloading Drivers For HP LaserJet 4000 TN With Windows 7?

Feb 4, 2013

I have replaced my hard drive and now need to downlaod driver for HP Laserjet 4000 TN (windows 7 - 32bit).

View 1 Replies View Related

Windows Home Premium - Appropriate Drivers For HP LaserJet 4000?

Jul 24, 2012

I have an HP LaserJet 4000 that was once a workhorse printer for me. Couple of years ago, changed my laptop (ran XP professional) and now run Windows 7 Home Premium. The Acer laptop does not have a serial/parallel port. I bought a USB adapter - but never got the printer to run. Appropriate driver and what do I need to do to welcome back this printer?

View 1 Replies View Related

Microsoft Wireless Mobile Mouse 4000 - Low Battery Already?

Jul 13, 2012

Can't believe what you read nowadays anymore. I bought a Microsoft Wireless Mobile Mouse 4000 to replace an ailing optical laser mouse that's on its last legs, and on the package it said that one "AA" battery would last for one entire year without replacing. What it meant was, it would have took until the next spring before it's time to replace the battery.Apparently, the mouse doesn't think like that, it appears, and when I was looking down at it, there was a red warning light indicating that the single battery had already been exhausted from use. Between surfing the web and playing some Team Fortress 2 now and then this is more than just a "mobile" mouse.

View 3 Replies View Related

Pc Crashes After New Driver Updates Radeon HD 4000 Series?

Oct 5, 2011

I recently decided to update my graphics drivers on my pc but its not going too well to start of here are my PC specs,

[code]...

So when I go to update my drivers to radeon website select the card series go win 7 64 and download the drivers,Before I install the drivers I go to control panel add/remove and remove the old driver software as the website instructed,after all the old stuff is removed I restart to be safe and install new driver software,no errors during the installation but as soon as its done monitor goes dark the pc fans start to work loudly,I wait a little with no success I power down the PC and turn it back on,starting PC back up everything works for about a minute until catalyst control center decides to load its self at which point blam black screen and pc shuts off at which point I have no choice to go safe mode and roll back to previous drivers,I tried doing it thru device manager internet option but it just told me im all up to date possibly because i never update my windows and updates are turned off.I know Im not update on drivers my software according to catalyst is 11.5 and missing some important drivers

View 10 Replies View Related

Geforce 4 Mx 4000 Driver Graphics Cards For Windows 7

Aug 8, 2012

i need driver geforce mx4000agp for windowes 7 32bit

View 1 Replies View Related

HP Laserjet 4000 Printer Free Driver Download For Windows 7?

Dec 27, 2012

Where can i download the driver for a HP Laserjet 4000 Printer that is compatible to Windows 7? I have the HP Laserjet 4000 Printer disk but it willwork with Windows 7.

View 1 Replies View Related

Gigabyte Motherboard For Amd Athlon(tm)64x2 Dual Core Processor 4000?

May 25, 2012

can i set gigabyte motherboard support with dd3 ram with amd Athlon(tm)64x2 4000+ processor

View 1 Replies View Related

Program Available That Will Allow To Connect Super Coolscan 4000 ED To Computer Running Windows 7?

Jul 5, 2012

Is there a program available that will allow me to connect my Super Coolscan 4000 ED to a computer running Windows 7?

View 4 Replies View Related

Connecting Printer Via LAN?

Aug 5, 2011

I have a office setup where two of the computers run on windows XP professional and the other two run on Windows 7 home edition. I want to connect all of them to a common printer through the port. Both the computers on win xp have been connected successfully but the other two on win 7 I am unable to connect, seems some patch is required.

View 2 Replies View Related

Connecting To DNS Server?

Jul 30, 2011

I need to connect to a DNS Server over the internet. I have tried setting the DNS as the server IP but I really don't know what I'm doing when it comes to this. The server is running Server 2008.

View 1 Replies View Related

Fai.metaservices Not Connecting In Wmp 12?

Jun 29, 2012

I'm not sure if this is a Windows 7 problem or a Dell problem. My last 2 laptops were Gateway and I never had this issue, but I'm finding that A LOT of people are having this issue and no one seems to be able to help. I click on "find album info" to update my music library and the window pops up, but not much else. The little globe in the top left corner spins for a few seconds and my hourglass shows up until I move my cursor, but that's it. Just a blank white page.My browser of choice is Chrome, but I'm sure IE is default for this task.

1. I've made sure [URL] is listed in my trusted zone in internet options.

2. I've turned off wmp in "turn on or off features," rebooted and turned it back on again.

3. I've made sure in wmp I allow internet to replace missing info by going to organize - options - library

4. I never have "work offline" checked - ever - but I checked just to make sure.

5. I'm not 100% positive, but I'm sure my firewall settings are okay.

This has been driving me crazy for weeks. I really miss my Gateway that ran Vista because the player was a lot better and I miss the advance tag editor. And my last Gateway ran Windows 7 but I never ran into this problem. I'm wondering if this is a Dell problem. I just got this about a month ago and the 1st thing I tried to do was install Chrome because I abhor IE. But IE wouldn't let me download Chrome. Finally I found the .exe file on my last pc and was able to install that way. Could these issues be related? Maybe it's IE9.Also, some people get a script error when they click "update album info," but I (and a few others) just get a blank window.

Dell Inspiron
Model: M5040
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD E-450 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2

[code]....

View 1 Replies View Related

Connecting TV As Second Screen?

Nov 6, 2012

I have a Packard Bell EasyNote TJ71 laptop running windows 7. I use an HDMI cable to attatch to a flat screen TV and generally have no problem bringing up the second screen then changing over to the TV as the one screen when I watch a movie. I only need to do this as closing the lid on the portable switches it off.The problem I have is that I can not get the sound transferred to the TV,

View 2 Replies View Related

Connecting Laptop To TV?

Nov 14, 2012

I have a Dell Inspiron 1525 that I purchased in the USA, brought to the UK - had hard drive failure; which was replaced and then had Windows 7 OS installed (and now the laptop thinks it's a UK laptop too - ie: the @ symbol has moved - etc)... None of this has been a problem until recently when I moved back to the USA. I have a TV that I want to hook this laptop up to, so that we can view my video files on a bigger screen - but I've found that my laptop is displaying in PAL format - while the TV must have it in NTSC. I've been searching around and I cannot seem to find out where to change that over.... Should I put in an American DVD into the dvd player and switch regions?

View 6 Replies View Related

Connecting A LCD TV As A Second Monitor?

May 16, 2011

When I connect my laptop to my LCD TV I can see windows 7 starting to load on the TV screen. As soon as Windows has installed the TV is not visible and windows can't detect it. Also some icons dissapear off my laptop screen.

View 1 Replies View Related

Connecting Two Computers Together?

May 18, 2011

I have purchase a switch to connect a laptop to a desktop computer, the first one having windows 7 (64 bits) and the second one having windows xp (sp 2 and 32 bits).have done the cables connection and nothing, absolutely nothing happens.The switch is OVISLINK EVO-FSH5C Fast Ethernet Switch

View 6 Replies View Related

Connecting To The Net Wirelessly

Apr 27, 2012

I have a Netgear Wireless Router WGR614-6VGUKS and a Netgear ADSL modem Router DG834 v4. Is it possible to connect to the Net wirelessly using these 2 and if so how? I have tried but with no success but not sure about order and connections. Looked on the Net but found info there confusing and not really answering my questions.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved