My printer will print in black in Microsoft Word and when I use the copier but it won't print in black off the computer, just color. I have tried changing to grey mode but it does not respond.
View 1 RepliesI can not print anything in black I have tried two different printers with plenty of ink in the cartriages and still nothing.
View 2 Replies View RelatedMy printer will print in black in Microsoft Word and when I use the copier but it won't print in black off the computer, just color. I have tried changing to grey mode but it does not respond.
View 1 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View RelatedWe are running Windows 7 on a Dell Latitude Notebook. We are trying to set the printer to default to always print in black & white. We have been unsucessful. Even trying to change to black & white within a particular word document still prints in color.
View 4 Replies View RelatedI have a scanned file that is black ink, but I can't print it due to my ink. I don't have black ink, so I want to print this document as is just in color is there a way in word or somewhere else?
View 2 Replies View RelatedI noticed when I try take a picture in a game such as assassins creed brotherhood, sc2, bfbc2 and use print screen and paste it in paint the image comes out black. I tried doing it on the desktop it works fine.
View 6 Replies View RelatedMy color cartridge is fairly new. I don't print a lot. I know it isn't empty. How can I refresh it so it will print?
View 6 Replies View RelatedI preparing a display that requires printing very light ink on black paper. I have tried white, although a lack of ink makes sense on white paper, yellow and light orange. Looking very closely at the finished sheet I do not see any evidence of any ink being deposited. However, I can see evidence of black being deposited. The printer is a HP PhotoSmart Premium C310a. Incidentally, my Hp series D2600 acts the same way. Both printers print all colors when white paper is used.
View 2 Replies View RelatedBoth printers connected to my HP desktop (win 7x64) via USB ports become inaccessible (cannot print) if the computer is left on for a day or more. When I look under Devices and Printers, it shows both printers with the troubleshooting icon (Status: needs troubleshooting). When I initiate troubleshooting, it comes back with - "troubleshooting could not identify problem." I have to reboot computer to get printers working again.
View 2 Replies View Relatedalignment test page comes up when computer turns on but wont go away cannot print normal from computer i just bought a new compaq computer.
View 1 Replies View Relatedinstalled an airport extreme router and then returned it because it would only communicate with our apple stuff and nothing else. put the netgear router back in and now neither laptop we own will print anything accept test pages. everything worked fine before. thought maybe something happened to the printer so i got a new one , installed it, same thing. have uninstalled and reinstalled and tried several other changes suggested on the internet. still ,same thing only prints test pages.
View 1 Replies View RelatedMy computer was just updated from XP to WIn 7 and now my printer will not print envelopes. It used to automatically but now it says to change settings and when I do, it does not recognize it.
View 4 Replies View RelatedI have just installed Windows 7 32 bit on a computer with is hosting a HP Laserjet 1600 printer to which I would like to print to from my laptop running Windows 64 bit. I have added the network printer from the host machine but it won't print. Both systems File and Printer sharing is turned on in the advance sharing settings for both computers and I can share files OK. I have also allow Print permissions in the Security tab under the networked printer properties. However the spooled document print when I restart the Host computer?
View 8 Replies View RelatedPrinter is USB wired to desktop. When I sent a print job to HP laser jet 1018 will not print until restart desktop computer.I believe I must have something set wrong. I just have not been able to find what is wrong. Laptop and desktop are both running windows 7 64 bit.It did fine when I had XP laptop.
View 2 Replies View RelatedIt just started Friday night, and I don't why it started, or I can't fix it. I tried reinstalling drivers for my keyboard, I tried disabling "Debug" in System Config, and even tried System Restore.
View 3 Replies View RelatedMy PC, running 64bit Windows 7 is printing blank pages on the work computer. I downloaded the necessary drivers needed to print from this computer to the printer, which is a CanonMX 340. The computer recognizes the printer and will print, but the pages that it prints are blank. The pages are blank whether I'm printing from the internet, a saved .jpg file or even a .pdf file. In order to connect to the printer, I plug in an ethernet cable, still nothing works.
View 1 Replies View RelatedI've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View Related(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies View RelatedI'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
View 4 Replies View Relatedwell my screen keeps going black, i restarted, then it stopped bt wanted to make sure the monitor is working fine, well, i installed skimcleaner, a few days ago or maybe earlier, computer hasn't speed up.
View 1 Replies View RelatedI'm having some serious troubles with my main PC, my gaming PC, and it's really messing things up for me. I was just parusing around like usual on my computer, it runs Windows 7, and I allowed it to download the usual updates and restart itself. When it shut down and began restarting, I notice that it loads up the logo, briefly flashes what I think is called a Bios Post page, and then goes to a page that is nothing but a blinking "__" sign. It does nothing here, won't continue, and I can't enter or do anything. It just endlessly blinks, before disappearing and the computer screen shows nothing but black.
View 3 Replies View RelatedI'm having random crashes during general usage on my pc. Attached you will(hopefully) find bsod logs. I have run memtest already and it came back ok. I have also updated to latest nvidia drivers and it still happens.This is a nearly fresh install of windows 7 and i have loaded minimal software onto it since install a week or so ago.
View 7 Replies View RelatedThen I asked a computer guy on STEAM and he said to try a fresh install of windows, but I already have windows 7 Home premium from the (irl)store.After trying to update the BIOS I've only failed, I've failed and failed.This happens on DiRT Showdown too, and Call OF duty Blackops 2.
-Gigabyte
-AMD FX(tm)-8120 Eight-Core Processor
-CPU speed: 3.1Ghz
-Ram: 8.2gb
-OS: Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
-Video Card: AMD Radeon HD 7800 Series
just put together a new computer and I'm having trouble booting it up. All the lights on the MoBo, and the fans are running, the fan on my GPU seems like its going at max speed.
When I try to start up, the computer starts, then turns off for about 2 seconds, then starts up again, and stays on until i turn it off. Theres only 1 short beep when I start it up. I am using a HDMI cable from my monitor to my graphics card, and it just says " no signal "
Heres the new system i've put together. ASUS Maximus IV Extreme-Z, Socket-1155 E-ATX, Z68, DDR3, 4xPCIe(2.0)x16, CFX&SLI, NF200, SATA 6Gb/s, USB 3.0,EFI
Corsair SSD Force Series� 3, 60GB
[Code].....
When I turn my computer on nothing happens. The power light comes on and I hear ONLY the fans turning. Nothing happens on the screen, it just stays black. It does say NO VGA signal.
View 1 Replies View RelatedI can turn on my computer but the screen is black, cd works, but nothing on screen. Toshiba Satellite. Any hot key combinations that will reboot to normal?
View 1 Replies View RelatedMy computer is definitely running with the cooler working at what not except no vision on the monitor. I've tried re-organizing the rams but it results in the computer starting up, shutting down, starting up shutting down. [code]
View 3 Replies View RelatedA few weeks ago I went to download a game and it wouldnt get download right. the time left count down went up and stopped in the middle. Also I keep getting the black screen when I turn on my computer, what do I do?
View 2 Replies View RelatedI am new here so apologies for being a newbie. I have a mid ranged gaming tower from ncix. That's about 7 months old. Its a 64bit windows 7 with 12gbs ram and 1tb hard drive.I was playing Starcraft with friends earlier today when suddenly the computer restarted during the match and was unable to boot up again after the sudden restart.It hangs at a black screen with the blinking underscore.
View 2 Replies View RelatedMy friend was having problems with her computer. So I ran a few programs to check it out and clean it up.. (AVG, CCleaner, AntiMalware...) But then after running the last one and rebooting, the screen goes black once Windows starts to load. Then the mouse appears but still nothing. I tried safe mode and still nothing... Not sure what to do, but just gaining access to copy files to an external hard drive is important. I was planning to reformat anyways..
View 3 Replies View Related