Bluescreen Error Locale ID:1057
Aug 27, 2011i had trouble in OS win 7 always show blue screen
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1057
[code]....
i had trouble in OS win 7 always show blue screen
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1057
[code]....
Just installed windows 7 about a month or so ago, running great, only every now and then if my system is idle and I wiggle the mouse to make it come back on , it just reboots automatically[CODE]
View 2 Replies View Relatedrecently I started getting error messages similar to may Previous post.
BCCode: d1
BCP1: 00000000
BCP2: 00000002
BCP3: 00000000
BCP4: 92653456
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
It is important to mention I'm not sure when this happens,Or what exactly I was doing the same hour.Once I watch a movie, another time it happens at night, etc.
All drivers updated, I am attaching files from C:WindowsMinidump.
I recently copied my HD's content to an SSD. Setup boot from the new drive w/o a hitch. Decided to format my old HD, and boom! Blue screen.After restart, windows wanted to search for solutions to the problem: this caused my computer to freeze up and blue screen again.
View 14 Replies View RelatedThe drive had windows xp on it from another build so i just used it to test. It booted xp fine. It only showed 3gb of ram but i think that was due to it being 1066 and needing me to change bios ram settings. So i took my full version of windows 7 professional that i have used to install on my laptop too and tried to install. I formatted the drive completely and chose to install. It goes through the paces installs.
Then when it is supposed to boot from the hard disk the first time it give me a brief blue screen PAGE_FAULT_IN_NONPAGED_AREA so i research it and see it can be linked to hard disk or ram. So obviously its not the disk its been running xp fine and so has the ram. But just in case i switched out the ram with 1gb of old ddr2 800 i had from another build. Same error. I then tried my new ocz ram with a single chip thinking its a dual channel problem. Same error. So then i reburn the microsoft professional image to a new dvd r go through the process again and reformat and still the same error. I have tested all i know to test. Any other ideas?
The computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem but after all of the windows updates, etc the error remains and appears every time the computer is rebooted..[CODE]
View 1 Replies View RelatedThe computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem but after all of the windows updates, etc the error remains and appears every time the computer is rebooted...
Log Name: System
Source: Microsoft-Windows-TerminalServices-RemoteConnectionManager
Event ID: 1057
Task Category: None
Level: Error
[code]....
I get this when i try to install windows 7 on my old laptop.Windows could not set the offline locale information. Error code: 0x80800000 tried searching online for this error, but found nothing. the laptop was dropped before. fell on its power cord side. I decided to reformat and this is the error i get.
View 4 Replies View Relatedevery time i try to boot a game, the screen goes black and the system crashes. I think this may be caused by the GTX 460 that i just got. But most of the time the card boots works and plays games fantastically. Just sometimes out of nowhere the game will run but as soon as the game has to be rendered the computer bluescreen's but i dont see this because of the monitor saying that it has lost connection. [code]
View 3 Replies View RelatedRandomly crashing PC. The BSOD and restart used to happen when watching videos online or attempting to play games, but now it happens often no matter what I am doing. I have done a format of my PC and a clean install of Windows 7 64 bit, but the same thing started happening almost instantly.
System Specs:
Processor: AMD FX-4100 Quad-Core, 3.60 Ghz
8.00 GB RAM
System Type: 64-bit Operating System
Hard drive: hitachi hd T721010SLA360 ATA 1TB (899 gigs free)
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem. This problem might be caused by a thermal issue. The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Unable to find locale data files. Please reinstall.what is this mean?
View 1 Replies View Relatedmy computer has a message that says install locale data files an how do i do this?
View 2 Replies View RelatedWhile playing Minecraft and MW3 I often get BSOD's within a few minutes of starting to play. I've been looking for months now for a solution, [CODE]
View 2 Replies View RelatedBSOD and subsequent boot failure. Windows Startup Repair can't fix the computer automatically and I'm at a loss. The problem occurred after I updated to the latest version of Itunes a few days ago. Right now, I can't even boot into safe mode, so I don't know how to run the utilities.
Here is what I got from Startup Repair:
Problem signature
Problem Event Name: StartupRemairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21200795
Problem Signature 05: AutoFailover
Problem Signature 06: 9
Problem Signature 07: BadDriver
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Details about the computer:
Acer Aspire AS1830T-3730 laptop
Core i3 - 1.2GHz
4GB DDR3 SD RAM
WD Caviar Black 750GB
Windows 7 Ultimate x64 - (retail re-installed)
Trying to play a game and since it's Jap, I had to change the system locale to Japan. After rebooting, because it requires a reboot, I got a BSOD in about a minute. I thought it was okay and wouldn't happen again because it ran out of memory or something. After I reboot, I got another BSOD and now it's saying "Reboot or insert proper boot device.
I went to the BIOS and my HD was the first boot priority. I'm a total noobie when it comes to computers.
I have an ASUS K52F-BBR5 Notebook. Could my HD be corrupted or is there a way to fix this? I'm currently finding my installation disk to see if I can do a startup repair.
I ran the Win 7-64 Beta for a few months and it was rock-solid. Never had a problem at all. I was thrilled.
Yesterday, I did a clean install of the RC, and I've got lot's of issues.
I've had 9 random BlueScreen crashes, all while the computer was idle and I was in another room.
Boot times are around 3-4 minutes.
When shutting down, the pretty new blue artwork with the words "shutting down" stays on screen for over 10 minutes. It won't shut down, just hangs on that screen.
Any thoughts? Blow it up and try again? I can post the minidump from the BSOD crashes if any one is interested.
I keep getting a BSOD that say either Memory Management or Page fault in nonpaged area. Now, I had this problem before, and it was bad ram (16 gb of corsair vengeance) but I replaced it with kingston hyperX and the problem seemed to go away until just recently. Its back and i have no clue what to do, since I replaced my ram and the problem came back. Could it be my motherboard that is somehow ruining my RAM? I have no idea what to do here.
[code]...
Recently I re installed Windows 7 on a new SSD I bought(OCZ Vertex 3 120gb) and the problem I'm having is that sometimes everything freezes except the mouse, I can move it around but I can't click anything. I get no response from keyboard input. I get no bluescreen or anything.What happens next is that after I reboot my computer after the crash it can't boot into Windows since it cant find any of my hard drives so it tries to boot from a CD instead. I turn off my computer, leave it off for about 10 seconds and it successfully boots into Windows again. This has happened 4 times since I installed Windows on the SSD one week ago. [code]
View 2 Replies View Relatedi would like to report an issue regarding my acer laptop 3810TZ since several week.one day it started to failed to bluescreen without addind any hardware or software.several differents bluescreen message at the time i enter my login password.i installed bluescreenview app and i can provide all information you need.
p[code]....
Currently I'm running the RC1. I just got two additional hard-drives to throw into a raid configuration which I set up properly within the bios (worked in XP).
The trouble is when I boot it makes it out of the BIOS and into the Starting Windows Screen. Windows bluescreens at that point. It only bluescreens when I have the RAID option enabled in my bios. I imagine that there aren't drivers for the controller?
When I go to intel's website to install their matrix controller drivers, I get this error: this computer does not meet the minimum requirements for installing this software.
I have an akoya Notebook with a INTEL Centrino 2 inside (2 CPU kernel, 64bit, 4 GB Mainmem) and installed Windows 7 64bit version.
First a question: Why does Windows 7 not configure automatically 2 cpu's?
I "forced" the 2 cpu mode in the msconfig menu. However, after the reboot, Windows 7 starts up but terminates with a BLUESCREEN telling me "BAD_SYSTEM_CONFIG_INFO"
Before, I used win vista home premium 32 bit and run it in 2 cpu mode without any hassles.
Any ideas how to "motivate" Windows 7 to use 2 cpu's and 64bit adress mode?
I have encountered 4 BSOD errors, pointing to page fault in nonpaged area and memory management. I have already executed check disk and system restore, the error still occurred. My system is just 1 month old and no overclocking is done.
View 3 Replies View Relatedi have a problem with getting consistant bsod�sMinidump.rarMinidump.rarMinidump.rar i added a attached a rar file with my dmp files. my computer specs are as following
p67a gd55
i5 2500k 3.3ghz
zotac 470 gf card
ocz 500w modstream pro
ssd 120 gb intel 320 series
I have overclocked my cpu to 4.5 ghz and i know its a likely cause to the bsod, however when i undo the clocking to the default settings my bsod come at the windows welcome text when starting my computer so it kinda forces my to keep the clocked settings until i figured out the cause to this. The frequency of the bsods now is very random from 1 hour to 3 hours, some times i can run fine for like 3 hours playing and everything without problems. Sometimes it lets me even stress the cpu with intel burntest which has confirmed this havent anything to do with overheating. cpu is 35c at idle and 65 full load. I had some issue with my grafikscard a about a week ago where the drivers failled and then got restored on my grafikcard monitoring program. Those problems when away when i tried to use a 550w vx psu from corsair. However my attemp to solve the bsod with trying a diffrent psu presisted so im back on my old one now again.The only cause i can see to this problem would be the psu but i hesitant to buy a new one just yet. Im really confused why it wont let my reduce the clocked settings without hammering me with bsod�s. I�m really desperate for advice on a solution.The Bsod happens mostly when i stress the computer in anyway playing, transfering file�s or simular
example of bsod
MACHINE_CHECK_EXCEPTION
0x0000009c
1 00000000`00000000
2 fffff880`009f4b70
3 00000000`00000000
4 00000000`00000000
caused by driver hal.dll+12818
My computer has been freezing a few times now and I have no idea why, I even waited for one hour and a blue screen didn't appear. Tought it was the browsers, cause it usually freezes when I'm on the google chrome, but I uninstalled it and it still freezes with IE. I have played some games but it didn't freeze, only with browsers opened, although it froze 2 times without the browser opened, no idea why. I used the SF Diagnostic tool to colect the info, if anymore info is needed just ask.
View 1 Replies View RelatedGetting a BSOD that, according to BlueScreenView, was caused by the NETIO.SYS driver. The requested documentation has been attached. This BSOD seems to manifest very randomly without regard to any specific activity patterns that I can identity. Additional details are below and Please note that while perfmon says I have no virus scanner, I am running AVG free (freshly installed before the test but for some reason not picked up).Age of hardware: brand new (just put the system together 2 weeks ago) but processor, motherboard, etc. are from late 2010/early 2011 (bought parts new from newegg).
View 9 Replies View RelatedBCCode: 4e
BCP1: 0000000000000099
BCP2: 000000000008751F
BCP3: 0000000000000001
BCP4: 000000000008781F
OS Version: 6_1_7601
Service Pack: 1_0
[code]....
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 7178
BCCode: 116
BCP1: 85F1A008
BCP2: 91E1C9B0
BCP3: 00000000
BCP4: 00000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that describe the problem:
C:WindowsMinidump 80912-16645-01.dmp
C:Usersjoset.COBROS_DOMAINAppDataLocalTempWER-61089-0.sysdata.xml
Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
Error message when you use applications that are based on legacy Transport Driver Interface (TDI) filter drivers on a computer that is running Windows 7 Beta or Windows Server 2008 R2: "STOP 0x000000D1
View 1 Replies View RelatedSo recently i have been having this problem when my computer shuts down without bluescreen after that trying to boot back up but usualy failing. Light turn on fans turn on for few seconds and shuts again. Stressing the system does not effect this it happens at most random times idle or stressed.
So for me this sounds most likely like a PSU problem but could it be my motherboard and how could i troubleshoot this since i dont have other PSU/MOBO.And somedays this happens very often someday it dosent happen at all.
I am trying to uninstall my .Net framework but my computer just crashes with a bluescreen or freeze. I get the same result when I use a .Net framwork cleanup tool. The bluescreen error code is usually Stop 0x0000000A.The reason I am trying to reinstall my .Net framework is because some programs such as Nem's tools fail to launch and instead get an error saying "side by side configuration is incorrect". If I try to repair my .Net framework i get the same bluescreen.
View 3 Replies View RelatedI had a bluescreen on this sony laptop, and I have attached the dump file to the thread. Can any identify what caused the bluescreen (driver... program... etc??) I was watching a flash video as the computer crashed. I am thinking it was perhaps the graphics driver. If you can't identify what caused the BlueScreen thru that file could you tell me where to check to find out?
View 6 Replies View Related