Currently I'm running the RC1. I just got two additional hard-drives to throw into a raid configuration which I set up properly within the bios (worked in XP).
The trouble is when I boot it makes it out of the BIOS and into the Starting Windows Screen. Windows bluescreens at that point. It only bluescreens when I have the RAID option enabled in my bios. I imagine that there aren't drivers for the controller?
When I go to intel's website to install their matrix controller drivers, I get this error: this computer does not meet the minimum requirements for installing this software.
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
I ran the Win 7-64 Beta for a few months and it was rock-solid. Never had a problem at all. I was thrilled.
Yesterday, I did a clean install of the RC, and I've got lot's of issues.
I've had 9 random BlueScreen crashes, all while the computer was idle and I was in another room.
Boot times are around 3-4 minutes.
When shutting down, the pretty new blue artwork with the words "shutting down" stays on screen for over 10 minutes. It won't shut down, just hangs on that screen.
Any thoughts? Blow it up and try again? I can post the minidump from the BSOD crashes if any one is interested.
I keep getting a BSOD that say either Memory Management or Page fault in nonpaged area. Now, I had this problem before, and it was bad ram (16 gb of corsair vengeance) but I replaced it with kingston hyperX and the problem seemed to go away until just recently. Its back and i have no clue what to do, since I replaced my ram and the problem came back. Could it be my motherboard that is somehow ruining my RAM? I have no idea what to do here.
Recently I re installed Windows 7 on a new SSD I bought(OCZ Vertex 3 120gb) and the problem I'm having is that sometimes everything freezes except the mouse, I can move it around but I can't click anything. I get no response from keyboard input. I get no bluescreen or anything.What happens next is that after I reboot my computer after the crash it can't boot into Windows since it cant find any of my hard drives so it tries to boot from a CD instead. I turn off my computer, leave it off for about 10 seconds and it successfully boots into Windows again. This has happened 4 times since I installed Windows on the SSD one week ago. [code]
i would like to report an issue regarding my acer laptop 3810TZ since several week.one day it started to failed to bluescreen without addind any hardware or software.several differents bluescreen message at the time i enter my login password.i installed bluescreenview app and i can provide all information you need.
recently I started getting error messages similar to may Previous post.
BCCode: d1
BCP1: 00000000
BCP2: 00000002
BCP3: 00000000
BCP4: 92653456
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
It is important to mention I'm not sure when this happens,Or what exactly I was doing the same hour.Once I watch a movie, another time it happens at night, etc.
All drivers updated, I am attaching files from C:WindowsMinidump.
I have an akoya Notebook with a INTEL Centrino 2 inside (2 CPU kernel, 64bit, 4 GB Mainmem) and installed Windows 7 64bit version.
First a question: Why does Windows 7 not configure automatically 2 cpu's?
I "forced" the 2 cpu mode in the msconfig menu. However, after the reboot, Windows 7 starts up but terminates with a BLUESCREEN telling me "BAD_SYSTEM_CONFIG_INFO"
Before, I used win vista home premium 32 bit and run it in 2 cpu mode without any hassles.
Any ideas how to "motivate" Windows 7 to use 2 cpu's and 64bit adress mode?
I have encountered 4 BSOD errors, pointing to page fault in nonpaged area and memory management. I have already executed check disk and system restore, the error still occurred. My system is just 1 month old and no overclocking is done.
i have a problem with getting consistant bsod�sMinidump.rarMinidump.rarMinidump.rar i added a attached a rar file with my dmp files. my computer specs are as following
p67a gd55 i5 2500k 3.3ghz zotac 470 gf card ocz 500w modstream pro ssd 120 gb intel 320 series
I have overclocked my cpu to 4.5 ghz and i know its a likely cause to the bsod, however when i undo the clocking to the default settings my bsod come at the windows welcome text when starting my computer so it kinda forces my to keep the clocked settings until i figured out the cause to this. The frequency of the bsods now is very random from 1 hour to 3 hours, some times i can run fine for like 3 hours playing and everything without problems. Sometimes it lets me even stress the cpu with intel burntest which has confirmed this havent anything to do with overheating. cpu is 35c at idle and 65 full load. I had some issue with my grafikscard a about a week ago where the drivers failled and then got restored on my grafikcard monitoring program. Those problems when away when i tried to use a 550w vx psu from corsair. However my attemp to solve the bsod with trying a diffrent psu presisted so im back on my old one now again.The only cause i can see to this problem would be the psu but i hesitant to buy a new one just yet. Im really confused why it wont let my reduce the clocked settings without hammering me with bsod�s. I�m really desperate for advice on a solution.The Bsod happens mostly when i stress the computer in anyway playing, transfering file�s or simular
example of bsod MACHINE_CHECK_EXCEPTION 0x0000009c 1 00000000`00000000 2 fffff880`009f4b70 3 00000000`00000000 4 00000000`00000000
My computer has been freezing a few times now and I have no idea why, I even waited for one hour and a blue screen didn't appear. Tought it was the browsers, cause it usually freezes when I'm on the google chrome, but I uninstalled it and it still freezes with IE. I have played some games but it didn't freeze, only with browsers opened, although it froze 2 times without the browser opened, no idea why. I used the SF Diagnostic tool to colect the info, if anymore info is needed just ask.
Getting a BSOD that, according to BlueScreenView, was caused by the NETIO.SYS driver. The requested documentation has been attached. This BSOD seems to manifest very randomly without regard to any specific activity patterns that I can identity. Additional details are below and Please note that while perfmon says I have no virus scanner, I am running AVG free (freshly installed before the test but for some reason not picked up).Age of hardware: brand new (just put the system together 2 weeks ago) but processor, motherboard, etc. are from late 2010/early 2011 (bought parts new from newegg).
Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 7178 BCCode: 116 BCP1: 85F1A008 BCP2: 91E1C9B0 BCP3: 00000000 BCP4: 00000002 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1
Files that describe the problem: C:WindowsMinidump 80912-16645-01.dmp C:Usersjoset.COBROS_DOMAINAppDataLocalTempWER-61089-0.sysdata.xml Read our privacy statement online: Windows 7 Privacy Statement - Microsoft Windows If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
Error message when you use applications that are based on legacy Transport Driver Interface (TDI) filter drivers on a computer that is running Windows 7 Beta or Windows Server 2008 R2: "STOP 0x000000D1
So recently i have been having this problem when my computer shuts down without bluescreen after that trying to boot back up but usualy failing. Light turn on fans turn on for few seconds and shuts again. Stressing the system does not effect this it happens at most random times idle or stressed.
So for me this sounds most likely like a PSU problem but could it be my motherboard and how could i troubleshoot this since i dont have other PSU/MOBO.And somedays this happens very often someday it dosent happen at all.
I am trying to uninstall my .Net framework but my computer just crashes with a bluescreen or freeze. I get the same result when I use a .Net framwork cleanup tool. The bluescreen error code is usually Stop 0x0000000A.The reason I am trying to reinstall my .Net framework is because some programs such as Nem's tools fail to launch and instead get an error saying "side by side configuration is incorrect". If I try to repair my .Net framework i get the same bluescreen.
I had a bluescreen on this sony laptop, and I have attached the dump file to the thread. Can any identify what caused the bluescreen (driver... program... etc??) I was watching a flash video as the computer crashed. I am thinking it was perhaps the graphics driver. If you can't identify what caused the BlueScreen thru that file could you tell me where to check to find out?
I was streaming some anime then out of nowhere my computer blue screens,it restarts fine, windows runs fine but a few letters on my keyboard stopped working. Windows 7 is OS dell inspiron n5010 is my laptop. P,o,i,u,w,e,r all do not work on my keyboard there might be a couple more that i have not noticed. no i don't remember the error sorry it was too fast. I scanned using advanced system care 5. It fixed a lot of bugs among other
am completely stuck and not sure what to do. I am a MS employee, got a free (legal) copy of Win7 ultimate under the home usage program and our internal help desk says they donupport. I have loaded many OS onto laptops at work, so know the basic routine. Computer is HP Pavillion Desktop, came with Vista Home edition about two years ago. I checked for compatibility and chose to do a custom install. On first install I forgot to eliminate the second partition that had the original image. Computer booted up ok (incredibly slow, about 15 minutes) but could reboot without bluescreen. Wireless worked, I was able to do some windows updates but knew something was very wrong, so didnattempt to reinstall programs. Printer driver loaded on its own. Re-did the custom install, this time deleting the extra partition.
Now, I can barely boot up, the machine blue screens on the way, wireless does work and it doesn recognize my home network or any other network (usually there are 3 or 4 in my neighborhood that show up). Shutting down will blue screen as well, I tried yesterday. Im leaving it up and running hoping for a miracle cure. On first attempt, I was able to capture this information. Problem signature:Problem Event Name: BlueScreenOS Version:6.1.7600.2.0.0.256.1Locale ID: 1033Additional information about the problem:BCCode: 9fBCP3: 8293EAE0BCP4: 84AB20C8OS Version: 6_1_7600Service Pack:0_0Product: 256_1Files that help describe the problem:C:WindowsMinidum21410-30919-01.dmpC:UsersCherylAppDataLocalTempWER-94536-0.sysdata.xmlRd our privacy statement onlinetp://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline:C:Windowsystem32en-USerofflps.txt I tried to look at my current mini dump folder but its empty AND I dont have permissions to view
For the past days my computer have had sudden freezes or bluescreens for no reason. I can't think of any updates or installments i have done recently that have affected this.
I recently copied my HD's content to an SSD. Setup boot from the new drive w/o a hitch. Decided to format my old HD, and boom! Blue screen.After restart, windows wanted to search for solutions to the problem: this caused my computer to freeze up and blue screen again.
i got myself this new one half a year ago, but im having (different) crashes again... the only components i took from my old computer are 2 1GB-harddrives (windows is on a new ssd)so i dont believe it's got something to do with those 2 hdds.my computer is having bluescreens randomly while im AFK, or when im working or playing a java game or somethingalso, whenever i try to shutdown my computer AFTER IT WAS RUNNING FOR A WHILE, im having a bluescreen as well. when im restarting the PC right after booting, i dont have the bluescreen.what i have tried so far:- i installed avira and did a virus check: negative- i ran the windows memory diagnosis, which also didn't find any problem with the RAMthe 2 most common errors the bluescreen shows are:"SYSTEM_SERVICE_EXCEPTION"and"MEMORY MANAGEMENT".i downloaded BlueScreenView, i am adding the screenshot of what it shows:oh the files seem to be too big, i will upload it externally:so, i dont really know what to do.i even suspected an unstable power supply since a test with an oscilloscope showed some irregularities, but im not so sure if thats the reason.edit: the entry from the bluescreen dumps says at "caused by driver:" --> ntoskrnl.exe most of the time
Whenever I plug my 360 controller into my pc its followed by blue screen of death, can anyone help med out? I didn't have this problem a few weeks ago.I changed usb ports, reinstalled the drivers and its still happening
