I have windows 7 home premium 64-bit running on Dell 1558 laptop.My laptop getting powered off as its getting over heated once in a while (once a day).I would like to setup auto-hibernate (in order not to lose data and suffer from improper shutdown) when its over heated.
View 1 Replies
I was replacing my heatsink for my cpu. Unfortunately the cpu came up with the heatsink. Before I get out a chisel and hammer, I thought I might first check on the forum for some advice on how to gently separate the cpu from the heatsink. Is there a solvent that I can safely use to disolve the goop without damaging the cpu? Computer is about 5 years old and has never had the heatsink removed before, so the cpu goop that was put on at the factory is probably like glue now.
View 7 Replies View Relatedmy computer heat up but not respond . and i got blach screen
View 3 Replies View RelatedJust a quick one (hopefully). The fans in my PC have been making a lot of racket and I was checking them and cleaning them today and trying to pin point which one was kicking up such a racket.During this I removed my CPU heatsink/fan and gave it a clean, but I wondered if I need to reapply thermal paste? I know when changing you're supposed to put it on, but I thought that as I have removed it, but not changed it, the paste won't be as good a contact between the CPU and the heatsink and won't disperse the heat as well (or maybe hardly at all?)Just checked the temp with only Firefox (and background tasks of course) running, and my Q6600 is running at about 45, 45, 45, 58. The final processor is always the hottest and it says the max it has been was 70.I'm loathe to do to much with the PC (gaming and I've got some videos to transfer to DVD, which always pushes one of the processors) if the lack of paste could damage the processor.
View 9 Replies View RelatedThis has just started recently, my computer tends to make a loud sound as though something is spinning incredibly fast. When I feel the top of my case when this happens, it is hotter. When feel the copper tubbing on my CPU fan, it's hotter. When it spins down, everything cools off to the touch. My CPU and PSU fans are both running, it is an older PC.
View 9 Replies View RelatedI have a Radeon HD 4500 graphics card that's plugged into the PCI express slot on my motherboard. The heat sink on the graphics card is huge and covers the next PCI slot down completely which I now need. I don't want to buy a new graphics card as the one I have works fine and I can't afford a new one.I can take the heat sink off but I don't want the thing to overheat and blow.
View 9 Replies View RelatedSo who actualy did try check temperature while cpu is at max work with turbo boost?On mine it can go till 75C at least and i consider it prety hot,before you ask - no its a new laptop with 2 month lol Aspire 7750G/ Intel i5 2430M 2.4ghz (Turbo Boost till 3.0ghz) also use a base akasa helix cooler.I decided to disable Turbo Boost wich wont pass trough 55C under max workload,whats your opinion on this? im prety sure that anything higher than 70C is crushing CPU eventualy.
View 1 Replies View Relatedseen this (item number 140663914284) heatsink for �19 for my AMD Phenom X4 9850 Black Edition. the heatsink is old?
View 5 Replies View Relatedhow to setup a simple water cooling heat-sink for my i7-2600K.
View 9 Replies View RelatedWhen booting my Dell Latitude E6410, there is a really loud noise coming from the left side of the computer (what i think is the fan?). It's also very hot and the login screen freezes and I am unable to login)I am however able to login in safe mode no problem and there is no noise or excess heat.I thought that maybe the problem was related to my use of the Anti-Virus program Avast, so I uninstalled and used their uninstall utility.I'm copying my list of installed programs below---I allready cleaned out all of the temp files and deleted anything that seemed iffy or not in use.
32 Bit HP CIO Components Installer
Adobe AIR
Adobe AIR
Adobe Community Help
Adobe Community Help
Adobe Flash Player 10 ActiveX
[code]....
i want colored heat-sinks to go with my computers theme (black and orange with blue highlights here and there) im looking into an ASRock extreme 4 990fx, but do not like the light blue and dark blue and gold, so to even it up a bit, i want to replace the north bridge and south bridges (if there is a heat sink on it) heatsinks. im thinking i want orange to contrast with the blue and dark brown/black.
View 6 Replies View RelatedI bought a Asus U36J laptop back in April of last year and ever since then I have been beating around an issue that I dont seem to be able to resolve one way or the other. When ever the laptop is on battery and in battery saving mode it has my taskbar on autohide. If I turn that off, then it stays off right until it is put back into battery saving mode at which point it is "magically" ticked on again.
Is there no way to simply disable that feature, as its annoying me greatly. I know its tied into the battery saving desktop, and I want to keep the battery saving desktop but want a full taskbar all the time. I found a supposed fix to make that happen, and while it actually makes the taskbar appear all the time, it still is a bad hack as any windows I have open wont "attach" to the taskbar but attaches to the buttom of the screen.
So for the love of god is there no sane way for me to keep the battery saving desktop but get rid of the autohiding taskbar. Otherwise I know Asus most likely wont be my laptop of choice next time aroumd.
Auto check comes up 4 times right after windows7 starts up. But will continue to boot normally. BEreg Query comes up with this.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
BootExecute REG_MULTI_SZ autocheck "autocheck ""autocheck autochk *"""\0autocheck "autocheck ""autocheck auto_reactivate \\?\Volume{a80f420c-d16d-11de-a2bb-806e6f6e6963}\bootwiz\asrm.bin"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck auto_reactivate \\?\Volume{a80f420c-d16d-11de-a2bb-806e6f6e6963}\bootwiz\asrm.bin"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck lsdelete"""\0autocheck "autocheck ""autocheck
[code]....
Have 1 SSD drive for OS /C No partions and one HDD/D with 2 partions with acronis backup on one the other is clean.
I set the Taskbar tab (in Taskbar & Start menu Properties) to Auto-hide the Taskbar.When I select Apply, the taskbar dips and disappears for a second and then comes right back and stays there.
View 5 Replies View RelatedMy laptop is a vaio ( VPCEA12EG). newly when I hibernate it , it automatically shutdown and after turn it on again the following massage apears.
View 9 Replies View RelatedHibernate issue - cause by ATI Radeon X1200 Series (Microsoft Corporation - WDDM) driver
I cant just download from the site because it isnt compatible with Windows 7
I see hibernate. I have chosen hiberate by lid and power button. It will hibernate once then come back on will not hibernate again.In fact it goes off into some weird power state each time, of sleep, then a few minutes later waking, or never sleeping and waking right away. It disables my keyboard light until I restart.
View 1 Replies View RelatedHave new PC and it used to hibernate after a period of time. The fans will shut down, monitors shut down etc. When I wake it then fans start back up, I have to relog in to Windows etc. Suddenly it no longer does this. I do not recall changing any setting and have gone to screen saver and set power saving settings etc. This is my first Windows 7 machine so not sure if i need to do something elsewhere
View 2 Replies View RelatedI have a dell XPS1702x laptop Windows 7 64, this problem came up in the last 5 days after I installed a logitech M705 mouse and software.When ever I put my laptop in sleep or hibernate and start up again I get a blank screen, but the laptop seems tobe running I have to turn the computer off and then on again using the power button. My computer then restarts and opens in the Error Recovert Screen stating that the computer was turned off improperly and ask if I want to restart Windows. I have preformed a complete Virus scan with Nortons 360, I have updating all my software, uninstalled the mouse and returned to my old mouse and the software for the new mouse and the problem is still there.
View 3 Replies View RelatedI have been trying to make my computer go into hibernation but it comes out of it 5 mins later. I have tried everything. disabling mouse to wake up, turning off power management on lan, turned off wol, and disk defragmentor.
View 1 Replies View RelatedTitle says it all. There are some things you can do from a distance using other pc's, a phone, etc, but I hate leaving my computer on. Anybody have any creative ways to be able to wake a computer up from a distance? Hibernate preferable but I understand it may be unreasonably difficult, perhaps sleep would be better? Still, sleep doesn't give the energy saving advantages as hibernation.
View 3 Replies View RelatedJust built the girlfriend a computer:
Asrock Z77 Extreme4
Ivybridge i5 3570k
2x4GB Crucial DDR3 1600 DIMMs
OCZTech 600W PSU
Generic CDRom, Seagate HDDs mirrored, WD Primary HDD.
No GPU connected as she won't need one.
At first I tried a mild overclock at 4.4ghz and stability tested with P95 for a few hours with no errors at all. Everything worked fine!Come time for her to actually use it, of course, BSOD's ensued, followed by boot looping.Boot loop would not stop until one of the DIMMs was removed.Naturally I thought the RAM was the culprit and tested the sticks using Memtest86, 4 passes each with no errors.Next tried single sticks of RAM in each slot, booted up fine. Tried with two sticks (1&3, 2&4), and it seemed to work fine if booting from a clean shutdown (as opposed to BSOD).Reverted to default BIOS settings and it seemed to help a little, as in it would actually wake from Hibernate a few times, but then out of nowhere would BSOD again.I read somewhere that a bent cpu pin might do this, but since a single stick worked on each of the 4 slots, I think this can be ruled out.BIOS are upto date with latest 2.20 version as well.Right now the computer is working fine with only one stick of RAM, the last BSOD happened with two sticks in, opening up Photoshop and InDesign at the same time with stock BIOS settings.
Code: ==================================================
Dump File : 100812-23337-01.dmp
Crash Time : 10/8/2012 10:55:04 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`0013213f
[code].....
i am facing the problem with hibernate before today when i hibernate laptop displays goes off but the laptop is still working and stop when the battery is empty and when again start the laptop it shows windows not shutdown properly and no BSOD ,error detail but now when i press hibernate system goes to sleep and when press any key or move the mouse system instantly show log on screen this is 2nd time 1 month ago same problem occurred but find no solution so ultimately i have to re-install the O.S but this problem occurred again.
View 3 Replies View RelatedI am using below Configuration,OS : Windows 7 HOme Basic 64 Bit Laptop : Sony Vaio - VPCEB44EN I've reistalled OS , after that Win7 is not going to Hibernate mode ..
View 1 Replies View RelatedI've installed Windows 7 Ultimate 64 bit intomy Toshiba Laptop. Before I activated the Windows 7, the Hibernate feature is working fine. After I've keying in the License Key, the Hibernate Feature is keep going to Sleeping Mode.
The exact output when I type this at an elevated command prompt. powercfg -a The result as follow:-
The following sleep states are available on this system: Standby < S3 > Hibernate Hybrid Sleep The following sleep states are not available on this system: Standby < S1 > The system firmware does not support this standby state. Standby < S2 > The system firmware does not support this standby state
how to disable the Hybrid Sleep?
After almost a year of "no problems" operation my PC has suddenly developed a strange will of its own on shut-down.I always put my PC into hibernate mode rather than switching it off. I use the START/Shut Down/Hibernate series of steps. Suddenly recently, my PC still goes into hibernate, as previously, but after approx 2-3 seconds the PC suddenly restarts! The only way to end PC use is now to shut it down completely which is a pain as it takes far longer to restart next time I use the machine.
View 8 Replies View RelatedI've got a new ASUS gaming laptop with Windows 7 64-bit OEM and I've been getting a few BSOD errors while bringing my laptop out of sleep/hibernate. Its not always but its often enough to be a nuisance. My drivers are all up to date
View 4 Replies View RelatedI have bought the Windows 7 Ultimate x32 bit for my macbook pro and after a Start->Hibernate Windows does not reboot anymore, I just have a black screen.The problem comes from the Start -> hibernante, I did not change any driver or did any updateI can't get the safe mode F8 working and the same if I try booting on the Windows DVD I have the same black screen.If I boot on my Mac OS X partition I can have an access to the Windows 7 files. Maybe I could delete or modify some files to be able to boot on Windows 7 normally, without the Hibernate process.
View 1 Replies View Relatedive got my system to go into hibernation using s3 acpi, and usb remote. also it will come out of hibernation using the remote and or usb keyboard. My system is used as a htpc and was wondering is there a way to hibernate the system with the power button of my tv (monitor) ie:- when monitor isnt detected.is there a setting im missing. basicly i have a plasma tv and onkyo 607 receiver. connected via vierra link. so when i power the tv down the receiver powers down . now it would be fantastic if it put the htpc into hibernation also..
View 9 Replies View RelatedI have a system that will probably end up loosing power before a proper shutdown more often than not. I need to boot into an image that will allow me to write to a SATA array, remove the array, and install a clean array for the next power up. Could this be done with some type of hibernate image(and how) or would I need to figure out how to boot from an ISO image?My main goal is to boot the system with the same settings every time and write data to the SATA array. The array will be removed and cleaned before power is returned. It would be great if there is a way to change a setting if need be and not need to take more than 20 minutes to redo the image.
View 2 Replies View Relatedif i press hibernate button,my laptop still can't hibernate completely.the power light wasn't off,the fan still works,whats happening to my laptop
View 1 Replies View Related
