XP Error After Win 7 Install - Ntoskrnl.exe Is Corrupted
Jul 29, 2009
So I just installed window 7 on my 2nd partition leaving XP in my 1st. Windows 7 ended up switching the letter drives making XP the D: while Windows 7 is the new C:
I currently get the ntoskrnl.exe is corrupted or missing right away when I boot into XP.
So I did the smart thing and put in my Windows XP OEM to repair.
However, I get the Blue Screen Of Death right before it's suppose to give me the options of repairing and installing.
Any Suggestions?
View 1 Replies
ADVERTISEMENT
Nov 4, 2009
I seem to have a unique fault on my Windows 7 install.
Upgrading from XP
Spec: AMD Dual-core 3gig, 4 gb RAM, WD 500GB primary HDD, ATI gfx
So - downloaded and installed Windows 7 from a memory stick.
Installed apparently ok.
Re-booted - came up with the "popular" NTOSKRNL.exe missing/corrupt error.
Re-copied various files; hal.dll, ntoskrnl.exe etc as directed on various sites - no joy.
Thinking it could be a MBR fault and not being familiar with Vista/Windows 7 I stuck in my old XP install CD to use Fdisk.
With the XP install CD in the drive, Windows 7 boots perfectly! (Doesn't even attempt to load XP install/repair)
Take out CD - NTOSKRNL error.
Once in Windows 7 - everything works fine.
Looking at various other options, came acorss a couple of tips about BCD and bootrec such as:
How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows
Error message when you start Windows Vista: "The Windows Boot Configuration Data file is missing required information"
Bootrec used to say the only OS was C:Windows.old.00
Ran fixes as above - now says there are no OS installed.
Windows 7 repair console only finds Windows 7 OS
Am starting to go insane.
To summarise:
Recieve NTOSKRNL.exe error when booting up PC
Boots Windows 7 fine with WinXP install disk in drive
Bootrec finds no OS
Windows 7 repair finds Windows 7
View 1 Replies
View Related
Feb 15, 2012
I am getting BSOD with error Error IRQL_NOT_LESS_EQUAL. When checked with Blue Screen view, I am seeing it is caused by ntoskrnl.exe driver. All system specs are listed on my profile.
View 4 Replies
View Related
Jan 16, 2013
For the past few days now, I have been receiving blue screens (my computer would have restarted by the time I wake up).each time, the caused of the error reports has been "ntoskrnl.exe".
View 3 Replies
View Related
Jan 10, 2012
I've had 2 BSODs within 20 minutes of eachother so I decided to fix this right away, the error is SYSTEM_SERVICE_EXCEPTION 0x0000003b ntoskrnl.exe+70600, If there is any additional info i need to post I'll try to get it I've neve rhad one of these, im currently running in safe mode though Windows 7.
View 3 Replies
View Related
Jul 18, 2012
my computer has been running great. just last week, it started randomly producing the BSOD. I have several dump files. I've tried analyzing them with WinDbg but I get nothing but errors: Unable to load image SystemRootsystem32 .exe, Win32 error 0n2 can some analyze my dump files, and tell me if I have bad memory or bad motherboard?
View 1 Replies
View Related
Aug 4, 2012
I've been getting DRIVER_POWER_STATE shutdowns on my comp recently when I leave it running for a day or overnight. I have about 5 dmp files showing the same ntoskrnl.exe.
View 9 Replies
View Related
Sep 11, 2012
This has been going on for a while now. I replaced my motherboard and a bad hard drive. I run off an SSD (samsung 830) as my boot drive with a 1 TB hard drive for storage. I ran memtest multiple times with no errors. Could this be a failing PSU?The debug info in WhoCrashed said this was not a hardware issue but most likely a driver.I uninstalled all the audio drivers except the one I used just in case. I reverted all my overclocking for the CPU and ram back to default.
View 9 Replies
View Related
Mar 9, 2009
after installing Windows 7 64bit, I start suffering from the next message:
windows 7 could not start because the following file is missing or corrupt: <Windows root>system32
toskrnl.exe
This issue continue occuring even after I tried several repairs of the OS. The strange thing is that only happen if remove the original disk from the DVD reader. If I leave the cd, the error does not occurred and the windows reboot normally.
View 7 Replies
View Related
Dec 7, 2011
I keep getting a random BSOD, I get it a lot in Lightroom 3 but have gotten the same error doing nothing.
*** STOP: 0x00000124 (0x0000000000000000, 0xfffffa80053d5028, 0x00000000b2000040,
0x0000000000000800)
*** hal.dll - Address 0xfffff80002c15a3b base at 0xfffff80002c03000 DateStamp
0x4ce7c669
Minidump is attached
View 4 Replies
View Related
Jun 22, 2012
what seems to have caused it? i was just on google chrome on Internet, everything was working fine then bam, blue screen out of nowhere. attached is the dump files etc
- windows 7 x64
- full retail version of windows 7 ultimate
- hardware is only 3 years old
- installed windows 7 ultimate in 2011 (i think)
View 1 Replies
View Related
Aug 13, 2012
For the past 3 weeks, I have been receiving blue screens serval times. Each time, the caused of the error reports has been "Wdf01000.sys" and address at ntoskrnl.exe+74a90.
View 1 Replies
View Related
Dec 29, 2011
I need ti install windows root system32 ntoskrnl.exe but do not have a disc. How do I do that?
View 1 Replies
View Related
Nov 24, 2011
cd/dvd driver seems to have disappeared
View 3 Replies
View Related
Feb 5, 2013
my dvd rom is working but its driver is crrupted when i try to auto fix the problem i got a msg( Windows cannot load the device driver for this hardware. The driver may be corrupted or missing0. (Code 39)
View 5 Replies
View Related
Nov 10, 2011
i am in dire need of some help with my pc. I am experiencing numerous BSOD issues. It started out whilst gaming with Battlefield 3 but is now happening all the time weather it be browsing the internet or just doing nothing. (If it helps firefox is crashing all the time). the computer is 10 months old and ran fine up until recently.I have had page fault, memory management, NTFS fault, bad pool, system exception.I have reviewed the forums and tried all the usual fixes, which goes along these lines:I used memtestx86 on my ram and found i had a dead stick so i purchased new 2 x 2G OZ 1333mhz, tested them for 20hrs and when they tested fine replaced the old sticks. Great i thought sorted, alas no.I removed AVG as one of the dmp files indicated it was that.nope carried out a chkdsk / r which showed no errors I removed all my nvidea drivers as they were being indicated but no its now worse than ever.I have attached the minidump files i have had over the past two days.
[code]...
View 3 Replies
View Related
Feb 2, 2012
I have a desktop computer and before windows boots i am receiving this error code <window root>\system32\ntoskrnl.exe. it is telling me to overcome this problem I must put in the windows cd which i don't have and cannot get my hands on to run the windows recovery console is there a way around this problem please.
View 2 Replies
View Related
Jan 3, 2012
I have a problem on my hard disk & it is dynamic disk the OS is corrupted how to install a new OS to my corrupted Dynamic Disk.
View 7 Replies
View Related
Jan 22, 2011
I have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message. Error : 0x80070570 The file or Directory is corrupted and unreadable.
View 1 Replies
View Related
Apr 10, 2012
recently i've been having a problem when trying to move ISO files from one harddrive to another. I've tried with 3 different ISO files and all come up with the same error:"An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.Error 0x80070570: The file or directory is corrupted and unreadable."First time I got this error i just thought something had gone wrong with the download so i deleted the file and downloaded it again. Same problem. This made me think that maybe it was just that download but now I have tried 2 other files and gotten the same error every time. This only happens with ISO files though as in case it was the harddrive or connection issue I tried transferring some other .avi files and they went across without problem.
View 9 Replies
View Related
Dec 2, 2011
I converted an old XP machine to a VHD with disk2vhd. Once imported into virtual pc the machine starts up but fails before booting with the message: missing or corrupted file: system32driverpci.sys
View 1 Replies
View Related
Jun 1, 2011
Every time the computer is turned on or restarted it runs Starup Repair. When i look at the diagnosis it says 'boot critical file c:\ci.dll is corrupt'. I have already tried to restore the computer but i don't have the discs where i have backed up the computer. I have also run a virus scan with Avira and it did pick up 4 viruses and i removed them but the error still occurs.
View 2 Replies
View Related
Oct 22, 2009
I have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.
When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.
I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)
Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.
View 7 Replies
View Related
Sep 11, 2012
I somehow managed to destroy windows update. it cannot find updates anymore. Ive gotten 2 error codes: 80248014 and (not sure) 80073712. I have tried using a program i found on the windows club that was supposed to fix it but didnt, i tried the System Update Readiness Tool, but it failed.
View 9 Replies
View Related
Nov 11, 2012
my computer, a toshiba satellite L655D-S5159, has been broken recently. At first, I got an infinite startup repair loop, because of a corrupted registry. I checked the registry files and they are all 256kb. I tried to run sfc /scannow and chkdsk /f /r, but that didn't do anything. Then I tried to run bootrec rebuildbcd, and now I'm getting error 0xc0000225 at startup.
View 1 Replies
View Related
Mar 24, 2011
My company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
View 9 Replies
View Related
Jul 21, 2012
Im getting blue screen every 35min here is full report..from bluescreen view
Caused By Driver - ntoskrnl.exe, Caused By Address - ntoskrnl.exe+71f00
File Description - NT Kernel & System, File Version 6.1.7601.17514 (win7sp1_rtm.101119-1850)
Full Path C:WindowsMinidump�20112-5850-01.dmp
Crash Address - ntoskrnl.exe+71f00
View 1 Replies
View Related
Sep 10, 2012
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Dec 17, 2011
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies
View Related
